amd-drm-fixes-5.16-2021-11-17: amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com
One quick fix for return error handling, one fix for ADL-P display and one revert targeting stable 5.4, for TGL's DSI display clocks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support that allow the userspace tool like RGP to get the GFX clock value at runtime, the fix follow the old way to show the min/current/max clocks level for compatible consideration. === Test === $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz * 1: 1100Mhz 2: 1600Mhz then run stress test on one APU system. $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz 1: 1040Mhz * 2: 1600Mhz The current GFXCLK value is updated at runtime. BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260 Reviewed-by: Huang Ray <Ray.Huang@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode which assign amdgpu_encoder->native_mode with *preferred_mode result in amdgpu_encoder->native_mode.clock always be 0. That will cause amdgpu_connector_set_property returned early on: if ((rmx_type != DRM_MODE_SCALE_NONE) && (amdgpu_encoder->native_mode.clock == 0)) when we try to set scaling mode Full/Full aspect/Center. Add the missing function to amdgpu_connector_vga_get_mode can fix this. It also works on dvi connectors because amdgpu_connector_dvi_helper_funcs.get_mode use the same method. Signed-off-by: hongao <hongao@uniontech.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
[Why]
After commit ("drm/amdgpu/display: add support for multiple backlights")
number of eDPs is defined while registering backlight device.
However the panel's extended caps get updated once before register call.
That leads to regression with extended caps like oled brightness control.
[How]
Update connector ext caps after register_backlight_device
Fixes: 7fd13baeb7a3a4 ("drm/amdgpu/display: add support for multiple backlights")
Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Samuel Čavoj <samuel@cavoj.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jasdeep Dhillon <Jasdeep.Dhillon@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just bail out if the target IP block is already in the desired
powergate/ungate state. This can avoid some duplicate settings
which sometimes may cause unexpected issues.
Link: https://lore.kernel.org/all/YV81vidWQLWvATMM@zn.tnic/
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214921
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215025
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1789
Fixes: bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Driver initialization is driven by IP version from IP discovery table. So add error print when failing to add ip block during driver initialization, this will be more friendly to user to know which IP version is not correct. [ 40.467361] [drm] host supports REQ_INIT_DATA handshake [ 40.474076] [drm] add ip block number 0 <nv_common> [ 40.474090] [drm] add ip block number 1 <gmc_v10_0> [ 40.474101] [drm] add ip block number 2 <psp> [ 40.474103] [drm] add ip block number 3 <navi10_ih> [ 40.474114] [drm] add ip block number 4 <smu> [ 40.474119] [drm] add ip block number 5 <amdgpu_vkms> [ 40.474134] [drm] add ip block number 6 <gfx_v10_0> [ 40.474143] [drm] add ip block number 7 <sdma_v5_2> [ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init [ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device. v2: use dev_err to multi-GPU system Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>