One bugfix in sun4i for 4.14

* tag 'drm-misc-fixes-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc:
  drm/sun4i: hdmi: Disable clks in bind function error path and unbind function

drm/i915 fixes for 4.14-rc4:

All 3 highest GLK bugs fixed by Imre:
- GLK drv reload - Fix DDI Phy init if it was already on.
- GLK suspend resume - Reprogram DMC firmware after s3/s4.
- GLK DC states - Fix idleness calculation.

* tag 'drm-intel-fixes-2017-10-04' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915/glk: Fix DMC/DC state idleness calculation
  drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume
  drm/i915: Fix DDI PHY init if it was already on

According to BSpec GLK like BXT needs to ignore the idle state of cores
before starting the DMC firmware's DC state handler.

Fixes: dbb28b5c3d3c ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com
(cherry picked from commit b7208a3f3e52791571df064fb96025ad48edd1bf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070
Fixes: cebfcead63de ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com
(cherry picked from commit 57522c4c87de20d8f7ad4e142a3a4334066d55ff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.

This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a0137b ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com
(cherry picked from commit e19c1eb885ac4186e64c7e484424124f3145318e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915 fixes for 4.14-rc3

Couple fixes for stable:

- Fix ELD connector types and consequently audio on DP (Jani).
- Ignore HDMI on Port A and consequently fix an ops on i915 probe
  when VBT advertises HDMI on Port A (Jani).

And a small fix:

- That removes a reduntant hw_check on modeset. (Colin)

* tag 'drm-intel-fixes-2017-09-27' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915/bios: ignore HDMI on port A
  drm/i915: remove redundant variable hw_check
  drm/i915: always update ELD connector type after get modes

The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.

Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.

Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170929082306.16193-6-wens@csie.org

Driver Changes:
- qxl: fix primary surface and fb unpinning (Gerd)
- sun41: fix CEC_PIN config gate now that media has been merged (Hans)
- tegra: fix TRACE_INCLUDE_PATH (Thierry)

Cc: Thierry Reding <treding@nvidia.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Gerd Hoffmann <kraxel@redhat.com>

* tag 'drm-misc-fixes-2017-09-28-1' of git://anongit.freedesktop.org/git/drm-misc:
  drm/tegra: trace: Fix path to include
  qxl: fix framebuffer unpinning
  drm/sun4i: cec: Enable back CEC-pin framework
  qxl: fix primary surface handling

A few fixes for 4.14.  Nothing too major.

* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: disable hard reset in hibernate for APUs
  drm/amdgpu: revert tile table update for oland

Just two small etnaviv fixes, one fixing a list corruption, the other
fixing a NULL ptr deref in an error path.

* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
  etnaviv: fix gem object list corruption
  etnaviv: fix submit error path