A bunch of fixes for vmwgfx 4.12 regressions and older stuff. In the latter case either trivial, cc'd stable or requiring backports for stable. * 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Bump driver minor and date drm/vmwgfx: Remove unused legacy cursor functions drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds" drm/vmwgfx: Fix large topology crash drm/vmwgfx: Make sure to update STDU when FB is updated drm/vmwgfx: Make sure backup_handle is always valid drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve() drm/vmwgfx: Don't create proxy surface for cursor drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
drm/i915 fixes for v4.12-rc5 * tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: fix warning for unused variable drm/i915: Fix 90/270 rotated coordinates for FBC drm/i915: Restore has_fbc=1 for ILK-M drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail drm/i915: Fix logical inversion for gen4 quirking drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2. drm/i915: Prevent the system suspend complete optimization drm/i915/psr: disable psr2 for resolution greater than 32X20 drm/i915: Hold a wakeref for probing the ring registers drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle drm/i915: Disable decoupled MMIO drm/i915/guc: Remove stale comment for q_fail drm/i915: Serialize GTT/Aperture accesses on BXT
Driver Changes: - kirin: Use correct dt port for the bridge (John) - meson: Fix regression caused by adding HDMI support to allow board configurations without HDMI (Neil) Cc: John Stultz <john.stultz@linaro.org> Cc: Neil Armstrong <narmstrong@baylibre.com> * tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc: drm/meson: Fix driver bind when only CVBS is available drm: kirin: Fix drm_of_find_panel_or_bridge conversion
mediatek fixes * 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags: drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake drm/mediatek: fix a timeout loop
imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes - Keep the external clock input to the PRE ungated and only use the internal soft reset to keep the module in low power state, to avoid sporadic startup failures. - Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB driver to fix probing for devices that still do not specify a panel in the device tree. - Fix the CSI input selection to the VDIC. According to experiments, the real behaviour differs a bit from the documentation. * tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: Fix CSI selection for VDIC drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure gpu: ipu-v3: pre: only use internal clock gating
drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’:
drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable]
struct drm_i915_private *dev_priv = engine->i915;
^~~~~~~~
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While introducing HDMI support, component matching on connectors node
were bypassed since no driver would actually bind on the DT node.
But when only a CVBS connector is present, only a single node is found
in the graph, but ignored and a NULL match table is given to the
component code.
This code permits bypassing the components framework by binding directly
the DRM driver when no components needs to be loaded.
Fixes: a41e82e6c457 ("drm/meson: Add support for components")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com
The clipped src coordinates have already been rotated by 270 degrees for
when the plane rotation is 90/270 degrees, hence the FBC code should no
longer swap the width and height.
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Restore the lost has_fbc flag for mobile ILK.
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: stable@vger.kernel.org Cc: Jonas Aaberg <cja@gmx.net> Tested-by: Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372) Signed-off-by: Jani Nikula <jani.nikula@intel.com>