Fix for the regression Linus called out, and another for probing dongles. * tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix DDC probe for passive adapters drm/i915: Properly initialize SDVO analog connectors
Some error paths didn't unreserve the BO. This resulted in a deadlock down the road on the next attempt to reserve the (still reserved) BO. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90873 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7fe04d6fa824ccea704535a597dc417c8687f990. Fixes some systems at the expense of others. Need to properly fix the pll divider selection. bug: https://bugzilla.kernel.org/show_bug.cgi?id=99651 Cc: stable@vger.kernel.org
This reverts commit a10f0df0615abb194968fc08147f3cdd70fd5aa5. Fixes some systems at the expense of others. Need to properly fix the pll divider selection. bug: https://bugzilla.kernel.org/show_bug.cgi?id=99651 Cc: stable@vger.kernel.org
Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems the SMC engine is relying on some state inside the CP engine. CP needs to chew at least one packet for it to get in good state for dynamic power management. This patch simply disabled and re-enable DPM after the ring test which is enough to avoid the freeze. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI
devices, as they do not have a sink device in them to respond to any AUX
traffic. When probing these dongles over the DDC, sometimes they will
NAK the first attempt even though the transaction is valid and they
support the DDC protocol. The retry loop inside of
drm_do_probe_ddc_edid() would normally catch this case and try the
transaction again, resulting in success.
That, however, was thwarted by the fix for [1]:
commit 9292f37e1f5c79400254dca46f83313488093825
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Thu Jan 5 09:34:28 2012 -0200
drm: give up on edid retries when i2c bus is not responding
This added code to exit immediately if the return code from the
i2c_transfer function was -ENXIO in order to reduce the amount of time
spent in waiting for unresponsive or disconnected devices. That was
possible because the underlying i2c bit banging algorithm had retries of
its own (which, of course, were part of the reason for the bug the
commit fixes).
Since its introduction in
commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Jul 20 15:44:45 2010 -0700
drm/i915: use GMBUS to manage i2c links
we've been flipping back and forth enabling the GMBUS transfers, but
we've settled since then. The GMBUS implementation does not do any
retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop
on first encounter of -ENXIO. This, combined with Eugeni's commit, broke
the retry on -ENXIO.
Retry GMBUS once on -ENXIO on first message to mitigate the issues with
passive adapters.
This patch is based on the work, and commit message, by Todd Previte
<tprevite@gmail.com>.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=41059
v2: Don't retry if using bit banging.
v3: Move retry within gmbux_xfer, retry only on first message.
v4: Initialize GMBUS0 on retry (Ville).
v5: Take index reads into account (Ville).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924
Cc: Todd Previte <tprevite@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2)
Tested-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the commit below, I missed the connector allocation in the function
intel_sdvo_analog_init(), leading to those connectors to have a NULL
state pointer.
commit 08d9bc920d465bbbbd762cac9383249c19bf69a2
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri Apr 10 10:59:10 2015 +0300
drm/i915: Allocate connector state together with the connectors
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Writing to a file is supposed to return the number of bytes written. Returning zero unfortunately causes bash to constantly spin trying to write to the sysfs file, to such an extent that even ^c and ^z have no effect. The only way out of that is to kill the shell and log back in. This isn't nice behaviour. Fix it by returning the number of characters written to sysfs files. [airlied: used suggestion from Al Viro] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
bunch of i915 fixes. * tag 'drm-intel-fixes-2015-06-05' of git://anongit.freedesktop.org/drm-intel: drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code drm/i915: Include G4X/VLV/CHV in self refresh status drm/i915: Initialize HWS page address after GPU reset drm/i915: Don't skip request retirement if the active list is empty drm/i915/hsw: Fix workaround for server AUX channel clock divisor
commit 65ca7514e21adbee25b8175fc909759c735d00ff
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Mon Feb 9 19:33:22 2015 +0000
drm/i915/skl: Implement WaBarrierPerformanceFixDisable
got misapplied and the code landed in chv_init_workarounds() instead of
the intended skl_init_workarounds(). Move it over to the right place.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>