linux.git/drivers/gpu, branch v3.8-rc5

ttm: on move memory failure don't leave a node dangling

2013-01-21T03:45:23+00:00

if we have a move notify callback, when moving fails, we call move notify
the opposite way around, however this ends up with *mem containing the mm_node
from the bo, which means we double free it. This is a follow on to the previous
fix.

Reviewed-by: Jerome Glisse 
Signed-off-by: Dave Airlie

ttm: don't destroy old mm_node on memcpy failure

2013-01-21T03:45:02+00:00

When we are using memcpy to move objects around, and we fail to memcpy
due to lack of memory to populate or failure to finish the copy, we don't
want to destroy the mm_node that has been copied into old_copy.

While working on a new kms driver that uses memcpy, if I overallocated bo's
up to the memory limits, and eviction failed, then machine would oops soon
after due to having an active bo with an already freed drm_mm embedded in it,
freeing it a second time didn't end well.

Reviewed-by: Jerome Glisse 
Signed-off-by: Dave Airlie

Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

2013-01-21T03:25:30+00:00

More important fixes for 3.9:
- error_state improvements to help debug the new scanline wait code added
  for gen6+ - bug reports started popping up :( patch from Chris Wilson.
- fix a panel power sequence confusion between the eDP and lvds detection
  code resulting in black screens - regression introduce in 3.8 (Jani
  Nikula)
- Chris fixed the root-cause of the ilk relocation vs. evict bug.
- Another piece of cargo-culted rc6 lore from Jani, fixes up a regression
  where a system refused to go into rc6 after suspend sometimes.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: fix FORCEWAKE posting reads
  drm/i915: Invalidate the relocation presumed_offsets along the slow path
  drm/i915/eDP: do not write power sequence registers for ghost eDP
  drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state

Revert "drm/radeon: do not move bo to different placement at each cs"

2013-01-17T18:10:50+00:00

This reverts commit d025e9e2b890db679f1246037bf65bd4be512627.

This causes corruption for a number of users and needs further
investigation in the next cycle.
https://bugzilla.kernel.org/show_bug.cgi?id=52491
https://bugs.freedesktop.org/show_bug.cgi?id=58659
http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.html

Signed-off-by: Alex Deucher

drm/i915: fix FORCEWAKE posting reads

2013-01-17T10:09:25+00:00

We stopped reading FORCEWAKE for posting reads in

commit 8dee3eea3ccd3b6c00a8d3a08dd715d6adf737dd
Author: Ben Widawsky 
Date:   Sat Sep 1 22:59:50 2012 -0700

    drm/i915: Never read FORCEWAKE

and started using something from the same cacheline instead. On the
bug reporter's machine this broke entering rc6 states after a
suspend/resume cycle. It turns out reading ECOBUS as posting read
worked fine, while GTFIFODBG did not, preventing RC6 states after
suspend/resume per the bug report referenced below. It's not entirely
clear why, but clearly GTFIFODBG was nowhere near the same cacheline
or address range as FORCEWAKE.

Trying out various registers for posting reads showed that all tested
registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true
work. Conversely, most (but not quite all) registers for which
NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced
bug.

Based on the above, add posting reads on ECOBUS where GTFIFODBG was
previously relied on.

In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as
well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same
address range as FORCEWAKE_VLV.

v2: Add more details to the commit message. No functional changes.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411
Reported-and-tested-by: Alexander Bersenev 
CC: Ben Widawsky 
Signed-off-by: Jani Nikula 
Reviewed-by: Chris Wilson 
Cc: stable@vger.kernel.org
[danvet: add cc: stable and make the commit message a bit clearer that
this is a regression fix and what exactly broke.]
Signed-off-by: Daniel Vetter

drm/i915: Invalidate the relocation presumed_offsets along the slow path

2013-01-16T09:53:38+00:00

In the slow path, we are forced to copy the relocations prior to
acquiring the struct mutex in order to handle pagefaults. We forgo
copying the new offsets back into the relocation entries in order to
prevent a recursive locking bug should we trigger a pagefault whilst
holding the mutex for the reservations of the execbuffer. Therefore, we
need to reset the presumed_offsets just in case the objects are rebound
back into their old locations after relocating for this exexbuffer - if
that were to happen we would assume the relocations were valid and leave
the actual pointers to the kernels dangling, instant hang.

Fixes regression from commit bcf50e2775bbc3101932d8e4ab8c7902aa4163b4
Author: Chris Wilson 
Date:   Sun Nov 21 22:07:12 2010 +0000

    drm/i915: Handle pagefaults in execbuffer user relocations

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984
Signed-off-by: Chris Wilson 
Cc: Daniel Vetter 
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter

drm/i915/eDP: do not write power sequence registers for ghost eDP

2013-01-16T09:23:01+00:00

Some machines detect an eDP port even if it's not really there, and eDP
initialization has a fail path for this. Typically such machines have an
LVDS display instead. A regression introduced in

commit 82ed61fa1a4e08d5f9e86fb1b715b50ed678b6ac
Author: Daniel Vetter 
Date:   Sat Oct 20 20:57:41 2012 +0200

    drm/i915: make edp panel power sequence setup more robust

updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS,
and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display.

Split the power sequencer initialization into two, delaying the register
updates until after we know the eDP is real.

Note: Keep the PP_CONTROL unlocking in the first part, even if it does not
update registers, per the commit message of the above mentioned commit.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601
Reported-and-tested-by: Ryan Coe 
Signed-off-by: Jani Nikula 
Signed-off-by: Daniel Vetter

drm/radeon: improve semaphore debugging on lockup

2013-01-15T14:07:13+00:00

Signed-off-by: Jerome Glisse 
Signed-off-by: Alex Deucher

drm/radeon: allow FP16 color clear registers on r500

2013-01-15T14:07:12+00:00

Probably not a candidate for stable kernels because of conflicts
in DRM versioning.

Signed-off-by: Marek Olšák 
Signed-off-by: Alex Deucher

drm/radeon: clear reset flags if engines are idle

2013-01-15T14:06:38+00:00

Fixes a hard lock in the gpu reset code after the
rework for DMA support (0ecebb9e0d14e9948e0b1529883a776758117d6f
"drm/radeon: switch to a finer grained reset for evergreen")
due to not bailing before the MC shutdown if the relevant engines
are idle.

Discussion:
http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.html

Reported-by: Eldad Zack 
Tested-by: Eldad Zack 
Acked-by: Paul Menzel 
Signed-off-by: Alex Deucher