Pull sound fixes from Takashi Iwai: - Fix a regression of USB-audio PCM assignment since 3.4 - A few VGA-switcheroo-related fixes for proper HDMI audio enablement - Fixed the missing initializations of HD-audio verbs, which may have resulted in various breakage - Some driver-specific ASoC updates - A few fixes for the dynamic PCM code - The addition of pinctrl support for the i.MX audmux which didn't make it into -rc1 due to cross tree dependency issues - A few minor fixes in compress API codes * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Don't forget to call init verbs added by fixup list ALSA: HDA: Pin fixup for Zotac Z68 motherboard ALSA: compress_core: cleanup pointers on stop ALSA: compress_core: don't wake up on pause ALSA: hda - Fix detection of Creative SoundCore3D controllers vga_switcheroo: Enable/disable audio clients at the right time ALSA: hda - HDMI Audio init all connectors when VGA-switcheroo is off vga_switcheroo: Fix error without CONFIG_VGA_SWITCHEROO ALSA: hda - Fix uninitialized HDMI controllers with VGA-switcheroo vga_switcheroo: Add a helper function to get the client state ALSA: usb-audio: Fix substream assignments ASoC: tegra: add MODULE_DEVICE_TABLE to tegra30_ahub ASoC: wm2000: Always use a 4s timeout for the firmware ASoC: dapm: Fix input list to use source widgets ASoC: dpcm: Fix dpcm_get_be() to check that DAI is BE ASoC: wm8994: Apply volume updates with clocks enabled ASoC: wm8994: Ensure all AIFnCLK events are run from the _late variants ASoC: imx-audmux: add pinctrl support ASoC: dapm: Fix connected widget capture path query.
A regression was introduced in the 3.3 rc series, commit "drm/ttm: simplify memory accounting for ttm user v2", causing the metadata of buffer objects created using the ttm_bo_create() function to be accounted twice. That causes massive leaks with the vmwgfx driver running for example SpecViewperf Catia-03 test 2, eventually killing the app. Furthermore, the same commit introduces a regression where metadata accounting is leaked if a buffer object is initialized with an illegal size. This is also fixed with this commit. v2: Fixed an error path and removed an unused variable. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix regresson since the introduction of command stream checking on evergreen (thread referenced below). Issue is cause by ddx allocating bo with formula width*height*bpp while programming the GPU command stream with ALIGN(height, 8). In some case (where page alignment does not hide the extra size bo should be according to height alignment) the kernel will reject the command stream. This patch reprogram the command stream to slice - 1 (slice is a derivative value from height) which avoid rejecting the command stream while keeping the value of command stream checking from a security point of view. This patch also fix wrong computation of layer size for 2D tiled surface. Which should fix issue when 2D color tiling is enabled. This dump the radeon KMS_DRIVER_MINOR so userspace can know if they are on a fixed kernel or not. https://lkml.org/lkml/2012/6/3/80 https://bugs.freedesktop.org/show_bug.cgi?id=50892 https://bugs.freedesktop.org/show_bug.cgi?id=50857 !!! STABLE need a custom version of this patch for 3.4 !!! v2: actually bump the minor version and add comment about stable v3: do compute the height the ddx was trying to use [airlied: drop left over debug] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
The audio clients have to be disabled before disabling the VGA and switching. Similarly, enabling the audio client should be done at last. Otherwise the audio-side operation stalls, eventually leading to Oops or lockups. Tested-by: Jörg-Volker Peetz <jvpeetz@web.de> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 9e612a008fa7fe493a473454def56aa321479495. It incorrectly finds VGA connectors where none are attached, apparently not noticing that nothing replied to the EDID queries, and happily using the default EDID modes that have nothing to do with actual hardware. That in turn then causes X to fall down to the lowest common denominator, which is usually the default 1024x768 mode that is in the default EDID and pretty much anything supports). I'd suggest that if not relying on the HDP pin, the code should at least check whether it gets valid EDID data back, rather than just assume there's something on the VGA connector. Cc: Dave Airlie <airlied@linux.ie> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add vga_switcheroo_get_client_state() to get the current state of the client. This is necessary to determine the proper initial state of audio clients in HD-audio driver. Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
drm/exynos: fixed blending for hdmi graphic layer
drm/exynos: Remove dummy encoder get_crtc operation implementation
drm/exynos: Keep a reference to frame buffer GEM objects
drm/exynos: Don't cast GEM object to Exynos GEM object when not needed
drm/exynos: DRIVER_BUS_PLATFORM is not a driver feature
drm/exynos: fixed size type.
drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M}
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler
char/agp: add another Ironlake host bridge
drm/i915: fix up ivb plane 3 pageflips
drm/i915: hold forcewake around ring hw init
drm/i915: Mark the ringbuffers as being in the GTT domain
drm/i915/crt: Do not rely upon the HPD presence pin
drm/i915: Reset last_retired_head when resetting ring
Cougar/Panther Point redefine the bits in SDEIIR pretty completely. This function is just debugging, but if we're debugging we probably want to be told accurate things instead of lies. I'm told Lynx Point changes this yet more, but I have no idea how... Note from Eugeni's review: "For the record and for future enabling efforts, for LPT, bits 28-31 and 1-14 are gone since CPT/PPT (e.g., those must be zero). And there is the bit 15 as a new addition, but we are not using it yet and probably won't be using in foreseeable future." Signed-off-by: Adam Jackson <ajax@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35103 Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Or at least plug another gapping hole. Apparrently hw desingers only moved the bit field, but did not bother ot re-enumerate the planes when adding support for a 3rd pipe. Discovered by i-g-t/flip_test. This may or may not fix the reference bugzilla, because that one smells like we have still larger fish to fry. v2: Fixup the impossible case to catch programming errors, noticed by Chris Wilson. References: https://bugs.freedesktop.org/show_bug.cgi?id=50069 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>