linux.git/drivers/gpu, branch v3.5-rc1

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

2012-06-01T22:40:29+00:00

Pull drm fixes from Dave Airlie:
 "A bunch of fixes:
   - vmware memory corruption
   - ttm spinlock balance
   - cirrus/mgag200 work in the presence of efifb
  and finally Alex and Jerome managed to track down a magic set of bits
  that on certain rv740 and evergreen cards allow the correct use of the
  complete set of render backends, this makes the cards operate
  correctly in a number of scenarios we had issues in before, it also
  manages to boost speed on benchmarks my large amounts on these
  specific gpus."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/edid: Make the header fixup threshold tunable
  drm/radeon: fix regression in UMS CS ioctl
  drm/vmwgfx: Fix nasty write past alloced memory area
  drm/ttm: Fix spinlock imbalance
  drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)
  drm/radeon: fix HD6790, HD6570 backend programming
  drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlock
  drm/radeon: fix bank information in tiling config
  drm/mgag200: kick off conflicting framebuffers earlier.
  drm/cirrus: kick out conflicting framebuffers earlier
  cirrus: avoid crash if driver fails to load

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2012-06-01T17:34:35+00:00

Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...

drm/edid: Make the header fixup threshold tunable

2012-06-01T16:00:23+00:00

6 bytes seems to be a reasonable default so far, but for the desperate
it's worth exposing this.

[airlied: change include to module.h for this]

Bugzilla: https://bugzilla.redhat.com/582559
Signed-off-by: Adam Jackson 
Signed-off-by: Dave Airlie

drm/radeon: fix regression in UMS CS ioctl

2012-06-01T16:00:21+00:00

radeon_cs_parser_init is called by both the legacy UMS
CS ioctl and the KMS CS ioctl.  Protect KMS specific
pieces of the code by checking that rdev is not NULL.

Reported-by: Michael Burian 

Signed-off-by: Alex Deucher 
Reviewed-by: Jerome Glisse 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drm/vmwgfx: Fix nasty write past alloced memory area

2012-06-01T16:00:20+00:00

Signed-off-by: Thomas Hellstrom 
Reviewed-by: Jakob Bornecrantz 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drm/ttm: Fix spinlock imbalance

2012-06-01T16:00:19+00:00

This imbalance may cause hangs when TTM is trying to swap out a buffer
that is already on the delayed delete list.

Signed-off-by: Thomas Hellstrom 
Reviewed-by: Jakob Bornecrantz 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)

2012-06-01T16:00:14+00:00

Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and
simplify render backend map. This now properly sets up the backend map
on r6xx-9xx which should improve 3D performance.

Vadim benchmarked also:
Some benchmarks on juniper (5750), fullscreen 1920x1080,
first result - kernel 3.4.0+ (fb21affa), second - with these patches:

Lightsmark:   91 fps => 123 fps    +35%
Doom3:        74 fps => 101 fps    +36%

Signed-off-by: Alex Deucher 
Signed-off-by: Jerome Glisse 
Signed-off-by: Dave Airlie

drm/radeon: fix HD6790, HD6570 backend programming

2012-06-01T14:40:05+00:00

Without this bit sets we get broken rendering and
lockups.

fglrx sets this bit.

Bugs that should be fixed by this patch :
https://bugs.freedesktop.org/show_bug.cgi?id=49792
https://bugzilla.kernel.org/show_bug.cgi?id=43207
https://bugs.freedesktop.org/show_bug.cgi?id=39282

Signed-off-by: Jerome Glisse 
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher 
Signed-off-by: Dave Airlie

drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlock

2012-06-01T14:36:54+00:00

Need to program an additional VM register.  This doesn't not currently
cause any problems, but allows us to program the proper backend
map in a subsequent patch which should improve performance on these
asics.

Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie

drm/radeon: fix bank information in tiling config

2012-06-01T14:36:31+00:00

While there are cards with more than 8 mem banks, the max
number of banks from a tiling perspective is 8, so cap
the tiling config at 8 banks.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=43448

Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie