[airlied: just added some comments on how to reenable]
On-list because the cat is out of the bag and we're clearly not good
enough to figure this out in private. The story thus far:
5e28b7b94408 ("drm: Set old handle to NULL before prime swap in
change_handle") tried to fix a race condition between the gem_close and
gem_change_handle ioctls, but got a few things wrong:
- There's a confusion with the local variable handle, which is actually
the new handle, and so the two-stage trick was actually applied to the
wrong idr slot. 7164d78559b0 ("drm/gem: fix race between
change_handle and handle_delete") tried to fix that by adding yet
another code block, but forgot to add the error handling. Which meant
we now have two paths, both kinda wrong.
- dc366607c41c ("drm: Replace old pointer to new idr") tried to apply
another fix, but inconsistently, again because of the handle confusion
- this would be the right fix (kinda, somewhat, it's a mess) if we'd
do the two-stage approach for the new handle. Except that wasn't the
intent of the original fix.
We also didn't have an igt merged for the original ioctl, which is a big
no-go. This was attempted to address off-list in the original bugfix,
and amd QA people claimed the bug was fixed now. Very clearly that's not
the case. Here's my attempt to sort this out:
- Rename the local variable to new_handle, the old aliasing with
args->handle is just too dangerously confusing.
- Merge the gem obj lookup with the two-stage idr_replace so that we
avoid getting ourselves confused there.
- This means we don't have a surplus temporary reference anymore, only
an inherited from the idr. A concurrent gem_close on the new_handle
could steal that. Fix that with the same two-stage approach
create_tail uses. This is a bit overkill as documented in the comment,
but I also don't trust my ability to understand this all correctly, so
go with the established pattern we have from other ioctls instead for
maximum paranoia.
- Adjust error paths. I've tried to make the error and success paths
common, because they are identical except for which handle is removed
and on which we call idr_replace to (re)install the object again. But
that made things messier to read, so I've left it at the more verbose
version, which unfortunately hides the symmetry in the entire code
flow a bit.
- While at it, also replace the 7 space indent with 1 tab.
And finally, because I flat out don't trust my abilities here at all
anymore:
- Disable the ioctl until we have the igt situation and everything else
sorted out on-list and with full consensus.
v2:
Sashiko noticed that I didn't handle the error path for idr_replace
correctly, it must be checked with IS_ERR_OR_NULL like in
gem_handle_delete. So yeah, definitely should just the existing paths
1:1 because this is endless amounts of tricky.
Also add the Fixes: line for the original ioctl, I forgot that too.
Reported-by: DARKNAVY (@DarkNavyOrg) <vr@darknavy.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Fixes: dc366607c41c ("drm: Replace old pointer to new idr")
Cc: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle")
Cc: David Francis <David.Francis@amd.com>
Cc: Puttimet Thammasaeng <pwn8official@gmail.com>
Cc: Christian Koenig <Christian.Koenig@amd.com>
Fixes: 7164d78559b0 ("drm/gem: fix race between change_handle and handle_delete")
Cc: Zhenghang Xiao <kipreyyy@gmail.com>
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle")
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260604194437.1725314-1-simona.vetter@ffwll.ch
- Fix color blob reference handling in intel_plane_state (Chaitanya Kumar Borah) - Revert "drm/i915/backlight: Remove try_vesa_interface" [backlight] (Suraj Kandpal) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patch.msgid.link/aiKgmwz7VGOaFXIv@linux
Short summary of fixes pull: dumb-buffer: - remove strict limits on buffer geometry ethosu: - reject unsupported NPU_OP_RESIZE - fix index of IFM region - fix weight index - fix overflows in DMA-size calculations - reject DMA commands with uninitialized length - fix OOB write in ethosu_gem_cmdstream_copy_and_validate imx: - fix kernel-doc warnings ivpu: - add overflow checks in firmware handling and get_info_ioctl v3d: - wait for pending L2T flush before cleaning caches - fix leak of vaddr - skip CSD when it has zeroed workgroups - fix ref counting in performance monitoring Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260605072602.GA268798@linux.fritz.box
This reverts commit 40d2f5820951dee818d05c14677277048bd85f9f. Removing the try_vesa_interface gate caused a backlight regression on panels whose VBT correctly reports INTEL_BACKLIGHT_DISPLAY_DDI and whose PWM path is the actual backlight control, but whose DPCD optimistically advertises DP_EDP_BACKLIGHT_AUX_ENABLE_CAP / _BRIGHTNESS_AUX_SET_CAP. After the commit such panels silently bind to the VESA AUX backlight funcs; AUX writes complete but the panel ignores them, leaving brightness stuck (no-op backlight). Observed on at least KBL and TGL eDP setups. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patch.msgid.link/20260517024709.1016121-1-suraj.kandpal@intel.com (cherry picked from commit f30fddb4402313aa5301a74d721638d343395269) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
- Revert removing support for unpublished NVL-S GuC (Daniele) - Suspend fixes related to multi-queue (Niranjana) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patch.msgid.link/aiHPGiPrAyHgwBZl@intel.com
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly.
Cc: stable@vger.kernel.org
Fixes: c6eabbab359c ("drm/v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260531-v3d-perfmon-lifetime-v2-1-60ed4485a203@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Return early in submit path when the multi-queue primary exec
queue is suspended to avoid submitting while suspended.
v2: Remove idle_skip_suspend fix as that feature is being
reverted here https://patchwork.freedesktop.org/series/167262/
Fixes: bc5775c59258 ("drm/xe/multi_queue: Add GuC interface for multi queue support")
Cc: stable@vger.kernel.org # v7.0+
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260603233946.863663-2-niranjana.vishwanathapura@intel.com
(cherry picked from commit b7fb55cc3364ca128cfff9d50649ffd4327cd01e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the schedule-disable done path for suspend, we
signal the suspend fence before clearing pending_disable.
That wakeup can let suspend_wait complete and resume be queued
immediately. The resume path may then reach enable_scheduling()
while pending_disable is still set and hit the
!exec_queue_pending_disable(q) assertion.
Fix this by clearing pending_disable before signaling
the suspend fence, so any resumed transition observes a
consistent state.
Fixes: 87651f31ae4e ("drm/xe/guc_submit: fix race around suspend_pending")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-3-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 4b1ae138b0e103d753773956a84eebc2edbf62c4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
Fixes: 8533051ce920 ("drm/xe: Skip exec queue schedule toggle if queue is idle during suspend")
Cc: stable@vger.kernel.org # v7.0+
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-2-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In smu_v14_0_0_set_soft_freq_limited_range(), the gfxclk floor is programmed via SetHardMinGfxClk together with SetSoftMaxGfxClk. Under power_dpm_force_performance_level=high this pins HardMin to peak gfxclk. In PMFW arbitration HardMin has higher priority than SoftMax, so the firmware thermal/PPT throttler cannot clamp gfxclk via SoftMax once HardMin is set to peak. Replace SetHardMinGfxClk with SetSoftMinGfxclk so the driver still requests peak performance but the firmware throttler retains the ability to clamp gfxclk under thermal/PPT pressure. SoftMax handling is unchanged and no other clock domains are affected. Signed-off-by: Priya Hosur <Priya.Hosur@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3ea273267fd29cbf6d83ee72329f59eb5042605b) Cc: stable@vger.kernel.org