linux.git/drivers/gpu/drm, branch v4.4-rc4 Linux kernel source tree Merge branch 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-next 2015-12-05T06:15:38+00:00 Dave Airlie airlied@gmail.com 2015-12-05T06:15:38+00:00 df4d4aa96d1db1657e14b848a341fc614c8d61eb A few more last minute fixes for 4.4 on top of my pull request from earlier this week. The big change here is a vblank regression fix due to commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks were missed". Beyond that, a hotplug fix and a few VM fixes. * 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3) drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2) drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt drm/amdgpu: add spin lock to protect freed list in vm (v2) drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2 drm/amdgpu: take a BO reference for the user fence drm/amdgpu: take a BO reference in the display code drm/amdgpu: set snooped flags only on system addresses v2 drm/amdgpu: fix race condition in amd_sched_entity_push_job drm/amdgpu: add err check for pin userptr add blacklist for thinkpad T40p drm/amdgpu: fix VM page table reference counting drm/amdgpu: fix userptr flags check 
A few more last minute fixes for 4.4 on top of my pull request from
earlier this week.  The big change here is a vblank regression fix due to
commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks
were missed".  Beyond that, a hotplug fix and a few VM fixes.

* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3)
  drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2)
  drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt
  drm/amdgpu: add spin lock to protect freed list in vm (v2)
  drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2
  drm/amdgpu: take a BO reference for the user fence
  drm/amdgpu: take a BO reference in the display code
  drm/amdgpu: set snooped flags only on system addresses v2
  drm/amdgpu: fix race condition in amd_sched_entity_push_job
  drm/amdgpu: add err check for pin userptr
  add blacklist for thinkpad T40p
  drm/amdgpu: fix VM page table reference counting
  drm/amdgpu: fix userptr flags check
drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3) 2015-12-04T20:15:07+00:00 Alex Deucher alexander.deucher@amd.com 2015-12-03T17:31:56+00:00 8e36f9d33c134d5c6448ad65b423a9fd94e045cf commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core more fragile to drivers which don't update hw vblank counters and vblank timestamps in sync with firing of the vblank irq and essentially at leading edge of vblank. This exposed a problem with radeon-kms/amdgpu-kms which do not satisfy above requirements: The vblank irq fires a few scanlines before start of vblank, but programmed pageflips complete at start of vblank and vblank timestamps update at start of vblank, whereas the hw vblank counter increments only later, at start of vsync. This leads to problems like off by one errors for vblank counter updates, vblank counters apparently going backwards or vblank timestamps apparently having time going backwards. The net result is stuttering of graphics in games, or little hangs, as well as total failure of timing sensitive applications. See bug #93147 for an example of the regression on Linux 4.4-rc: https://bugs.freedesktop.org/show_bug.cgi?id=93147 This patch tries to align all above events better from the viewpoint of the drm core / of external callers to fix the problem: 1. The apparent start of vblank is shifted a few scanlines earlier, so the vblank irq now always happens after start of this extended vblank interval and thereby drm_update_vblank_count() always samples the updated vblank count and timestamp of the new vblank interval. To achieve this, the reporting of scanout positions by radeon_get_crtc_scanoutpos() now operates as if the vblank starts radeon_crtc->lb_vblank_lead_lines before the real start of the hw vblank interval. This means that the vblank timestamps which are based on these scanout positions will now update at this earlier start of vblank. 2. The driver->get_vblank_counter() function will bump the returned vblank count as read from the hw by +1 if the query happens after the shifted earlier start of the vblank, but before the real hw increment at start of vsync, so the counter appears to increment at start of vblank in sync with the timestamp update. 3. Calls from vblank irq-context and regular non-irq calls are now treated identical, always simulating the shifted vblank start, to avoid inconsistent results for queries happening from vblank irq vs. happening from drm_vblank_enable() or vblank_disable_fn(). 4. The radeon_flip_work_func will delay mmio programming a pageflip until the start of the real vblank iff it happens to execute inside the shifted earlier start of the vblank, so pageflips now also appear to execute at start of the shifted vblank, in sync with vblank counter and timestamp updates. This to avoid some races between updates of vblank count and timestamps that are used for swap scheduling and pageflip execution which could cause pageflips to execute before the scheduled target vblank. The lb_vblank_lead_lines "fudge" value is calculated as the size of the display controllers line buffer in scanlines for the given video mode: Vblank irq's are triggered by the line buffer logic when the line buffer refill for a video frame ends, ie. when the line buffer source read position enters the hw vblank. This means that a vblank irq could fire at most as many scanlines before the current reported scanout position of the crtc timing generator as the number of scanlines the line buffer can maximally hold for a given video mode. This patch has been successfully tested on a RV730 card with DCE-3 display engine and on a evergreen card with DCE-4 display engine, in single-display and dual-display configuration, with different video modes. A similar patch is needed for amdgpu-kms to fix the same problem. Limitations: - Maybe replace the udelay() in the flip_work_func() by a suitable usleep_range() for a bit better efficiency? Will try that. - Line buffer sizes in pixels are hard-coded on < DCE-4 to a value i just guessed to be high enough to work ok, lacking info on the true sizes atm. Probably fixes: fdo#93147 Port of Mario's radeon fix to amdgpu. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2) Refine amdgpu_flip_work_func() for better efficiency. In amdgpu_flip_work_func, replace the busy waiting udelay(5) with event lock held by a more performance and energy efficient usleep_range() until at least predicted true start of hw vblank, with some slack for scheduler happiness. Release the event lock during waits to not delay other outputs in doing their stuff, as the waiting can last up to 200 usecs in some cases. Also small fix to code comment and formatting in that function. (v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v3) Fix crash in crtc disabled case 
commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many
vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core
more fragile to drivers which don't update hw vblank counters and
vblank timestamps in sync with firing of the vblank irq and
essentially at leading edge of vblank.

This exposed a problem with radeon-kms/amdgpu-kms which do not
satisfy above requirements:

The vblank irq fires a few scanlines before start of vblank, but
programmed pageflips complete at start of vblank and
vblank timestamps update at start of vblank, whereas the
hw vblank counter increments only later, at start of vsync.

This leads to problems like off by one errors for vblank counter
updates, vblank counters apparently going backwards or vblank
timestamps apparently having time going backwards. The net result
is stuttering of graphics in games, or little hangs, as well as
total failure of timing sensitive applications.

See bug #93147 for an example of the regression on Linux 4.4-rc:

https://bugs.freedesktop.org/show_bug.cgi?id=93147

This patch tries to align all above events better from the
viewpoint of the drm core / of external callers to fix the problem:

1. The apparent start of vblank is shifted a few scanlines earlier,
so the vblank irq now always happens after start of this extended
vblank interval and thereby drm_update_vblank_count() always samples
the updated vblank count and timestamp of the new vblank interval.

To achieve this, the reporting of scanout positions by
radeon_get_crtc_scanoutpos() now operates as if the vblank starts
radeon_crtc->lb_vblank_lead_lines before the real start of the hw
vblank interval. This means that the vblank timestamps which are based
on these scanout positions will now update at this earlier start of
vblank.

2. The driver->get_vblank_counter() function will bump the returned
vblank count as read from the hw by +1 if the query happens after
the shifted earlier start of the vblank, but before the real hw increment
at start of vsync, so the counter appears to increment at start of vblank
in sync with the timestamp update.

3. Calls from vblank irq-context and regular non-irq calls are now
treated identical, always simulating the shifted vblank start, to
avoid inconsistent results for queries happening from vblank irq vs.
happening from drm_vblank_enable() or vblank_disable_fn().

4. The radeon_flip_work_func will delay mmio programming a pageflip until
the start of the real vblank iff it happens to execute inside the shifted
earlier start of the vblank, so pageflips now also appear to execute at
start of the shifted vblank, in sync with vblank counter and timestamp
updates. This to avoid some races between updates of vblank count and
timestamps that are used for swap scheduling and pageflip execution which
could cause pageflips to execute before the scheduled target vblank.

The lb_vblank_lead_lines "fudge" value is calculated as the size of
the display controllers line buffer in scanlines for the given video
mode: Vblank irq's are triggered by the line buffer logic when the line
buffer refill for a video frame ends, ie. when the line buffer source read
position enters the hw vblank. This means that a vblank irq could fire at
most as many scanlines before the current reported scanout position of the
crtc timing generator as the number of scanlines the line buffer can
maximally hold for a given video mode.

This patch has been successfully tested on a RV730 card with DCE-3 display
engine and on a evergreen card with DCE-4 display engine, in single-display
and dual-display configuration, with different video modes.

A similar patch is needed for amdgpu-kms to fix the same problem.

Limitations:

- Maybe replace the udelay() in the flip_work_func() by a suitable
  usleep_range() for a bit better efficiency? Will try that.

- Line buffer sizes in pixels are hard-coded on < DCE-4 to a value
  i just guessed to be high enough to work ok, lacking info on the true
  sizes atm.

Probably fixes: fdo#93147

Port of Mario's radeon fix to amdgpu.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v1) Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>

(v2) Refine amdgpu_flip_work_func() for better efficiency.

     In amdgpu_flip_work_func, replace the busy waiting udelay(5)
     with event lock held by a more performance and energy efficient
     usleep_range() until at least predicted true start of hw vblank,
     with some slack for scheduler happiness. Release the event lock
     during waits to not delay other outputs in doing their stuff, as
     the waiting can last up to 200 usecs in some cases.

     Also small fix to code comment and formatting in that function.

(v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>

(v3) Fix crash in crtc disabled case
drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2) 2015-12-04T18:11:41+00:00 Mario Kleiner mario.kleiner.de@gmail.com 2015-11-25T19:14:31+00:00 5b5561b3660db734652fbd02b4b6cbe00434d96b commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core more fragile to drivers which don't update hw vblank counters and vblank timestamps in sync with firing of the vblank irq and essentially at leading edge of vblank. This exposed a problem with radeon-kms/amdgpu-kms which do not satisfy above requirements: The vblank irq fires a few scanlines before start of vblank, but programmed pageflips complete at start of vblank and vblank timestamps update at start of vblank, whereas the hw vblank counter increments only later, at start of vsync. This leads to problems like off by one errors for vblank counter updates, vblank counters apparently going backwards or vblank timestamps apparently having time going backwards. The net result is stuttering of graphics in games, or little hangs, as well as total failure of timing sensitive applications. See bug #93147 for an example of the regression on Linux 4.4-rc: https://bugs.freedesktop.org/show_bug.cgi?id=93147 This patch tries to align all above events better from the viewpoint of the drm core / of external callers to fix the problem: 1. The apparent start of vblank is shifted a few scanlines earlier, so the vblank irq now always happens after start of this extended vblank interval and thereby drm_update_vblank_count() always samples the updated vblank count and timestamp of the new vblank interval. To achieve this, the reporting of scanout positions by radeon_get_crtc_scanoutpos() now operates as if the vblank starts radeon_crtc->lb_vblank_lead_lines before the real start of the hw vblank interval. This means that the vblank timestamps which are based on these scanout positions will now update at this earlier start of vblank. 2. The driver->get_vblank_counter() function will bump the returned vblank count as read from the hw by +1 if the query happens after the shifted earlier start of the vblank, but before the real hw increment at start of vsync, so the counter appears to increment at start of vblank in sync with the timestamp update. 3. Calls from vblank irq-context and regular non-irq calls are now treated identical, always simulating the shifted vblank start, to avoid inconsistent results for queries happening from vblank irq vs. happening from drm_vblank_enable() or vblank_disable_fn(). 4. The radeon_flip_work_func will delay mmio programming a pageflip until the start of the real vblank iff it happens to execute inside the shifted earlier start of the vblank, so pageflips now also appear to execute at start of the shifted vblank, in sync with vblank counter and timestamp updates. This to avoid some races between updates of vblank count and timestamps that are used for swap scheduling and pageflip execution which could cause pageflips to execute before the scheduled target vblank. The lb_vblank_lead_lines "fudge" value is calculated as the size of the display controllers line buffer in scanlines for the given video mode: Vblank irq's are triggered by the line buffer logic when the line buffer refill for a video frame ends, ie. when the line buffer source read position enters the hw vblank. This means that a vblank irq could fire at most as many scanlines before the current reported scanout position of the crtc timing generator as the number of scanlines the line buffer can maximally hold for a given video mode. This patch has been successfully tested on a RV730 card with DCE-3 display engine and on a evergreen card with DCE-4 display engine, in single-display and dual-display configuration, with different video modes. A similar patch is needed for amdgpu-kms to fix the same problem. Limitations: - Line buffer sizes in pixels are hard-coded on < DCE-4 to a value i just guessed to be high enough to work ok, lacking info on the true sizes atm. Fixes: fdo#93147 Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Tested-by: Dave Witbrodt <dawitbro@sbcglobal.net> (v2) Refine radeon_flip_work_func() for better efficiency: In radeon_flip_work_func, replace the busy waiting udelay(5) with event lock held by a more performance and energy efficient usleep_range() until at least predicted true start of hw vblank, with some slack for scheduler happiness. Release the event lock during waits to not delay other outputs in doing their stuff, as the waiting can last up to 200 usecs in some cases. Retested on DCE-3 and DCE-4 to verify it still works nicely. (v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many
vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core
more fragile to drivers which don't update hw vblank counters and
vblank timestamps in sync with firing of the vblank irq and
essentially at leading edge of vblank.

This exposed a problem with radeon-kms/amdgpu-kms which do not
satisfy above requirements:

The vblank irq fires a few scanlines before start of vblank, but
programmed pageflips complete at start of vblank and
vblank timestamps update at start of vblank, whereas the
hw vblank counter increments only later, at start of vsync.

This leads to problems like off by one errors for vblank counter
updates, vblank counters apparently going backwards or vblank
timestamps apparently having time going backwards. The net result
is stuttering of graphics in games, or little hangs, as well as
total failure of timing sensitive applications.

See bug #93147 for an example of the regression on Linux 4.4-rc:

https://bugs.freedesktop.org/show_bug.cgi?id=93147

This patch tries to align all above events better from the
viewpoint of the drm core / of external callers to fix the problem:

1. The apparent start of vblank is shifted a few scanlines earlier,
so the vblank irq now always happens after start of this extended
vblank interval and thereby drm_update_vblank_count() always samples
the updated vblank count and timestamp of the new vblank interval.

To achieve this, the reporting of scanout positions by
radeon_get_crtc_scanoutpos() now operates as if the vblank starts
radeon_crtc->lb_vblank_lead_lines before the real start of the hw
vblank interval. This means that the vblank timestamps which are based
on these scanout positions will now update at this earlier start of
vblank.

2. The driver->get_vblank_counter() function will bump the returned
vblank count as read from the hw by +1 if the query happens after
the shifted earlier start of the vblank, but before the real hw increment
at start of vsync, so the counter appears to increment at start of vblank
in sync with the timestamp update.

3. Calls from vblank irq-context and regular non-irq calls are now
treated identical, always simulating the shifted vblank start, to
avoid inconsistent results for queries happening from vblank irq vs.
happening from drm_vblank_enable() or vblank_disable_fn().

4. The radeon_flip_work_func will delay mmio programming a pageflip until
the start of the real vblank iff it happens to execute inside the shifted
earlier start of the vblank, so pageflips now also appear to execute at
start of the shifted vblank, in sync with vblank counter and timestamp
updates. This to avoid some races between updates of vblank count and
timestamps that are used for swap scheduling and pageflip execution which
could cause pageflips to execute before the scheduled target vblank.

The lb_vblank_lead_lines "fudge" value is calculated as the size of
the display controllers line buffer in scanlines for the given video
mode: Vblank irq's are triggered by the line buffer logic when the line
buffer refill for a video frame ends, ie. when the line buffer source read
position enters the hw vblank. This means that a vblank irq could fire at
most as many scanlines before the current reported scanout position of the
crtc timing generator as the number of scanlines the line buffer can
maximally hold for a given video mode.

This patch has been successfully tested on a RV730 card with DCE-3 display
engine and on a evergreen card with DCE-4 display engine, in single-display
and dual-display configuration, with different video modes.

A similar patch is needed for amdgpu-kms to fix the same problem.

Limitations:

- Line buffer sizes in pixels are hard-coded on < DCE-4 to a value
  i just guessed to be high enough to work ok, lacking info on the true
  sizes atm.

Fixes: fdo#93147

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

(v1) Tested-by: Dave Witbrodt <dawitbro@sbcglobal.net>

(v2) Refine radeon_flip_work_func() for better efficiency:

     In radeon_flip_work_func, replace the busy waiting udelay(5)
     with event lock held by a more performance and energy efficient
     usleep_range() until at least predicted true start of hw vblank,
     with some slack for scheduler happiness. Release the event lock
     during waits to not delay other outputs in doing their stuff, as
     the waiting can last up to 200 usecs in some cases.

     Retested on DCE-3 and DCE-4 to verify it still works nicely.

(v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt 2015-12-04T18:09:12+00:00 Lyude cpaul@redhat.com 2015-12-03T23:26:07+00:00 cb5d41664375ad4fbe47bdae745bb6fe8d837e68 HPD signals on DVI ports can be fired off before the pins required for DDC probing actually make contact, due to the pins for HPD making contact first. This results in a HPD signal being asserted but DDC probing failing, resulting in hotplugging occasionally failing. This is somewhat rare on most cards (depending on what angle you plug the DVI connector in), but on some cards it happens constantly. The Radeon R5 on the machine used for testing this patch for instance, runs into this issue just about every time I try to hotplug a DVI monitor and as a result hotplugging almost never works. Rescheduling the hotplug work for a second when we run into an HPD signal with a failing DDC probe usually gives enough time for the rest of the connector's pins to make contact, and fixes this issue. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
HPD signals on DVI ports can be fired off before the pins required for
DDC probing actually make contact, due to the pins for HPD making
contact first. This results in a HPD signal being asserted but DDC
probing failing, resulting in hotplugging occasionally failing.

This is somewhat rare on most cards (depending on what angle you plug
the DVI connector in), but on some cards it happens constantly. The
Radeon R5 on the machine used for testing this patch for instance, runs
into this issue just about every time I try to hotplug a DVI monitor and
as a result hotplugging almost never works.

Rescheduling the hotplug work for a second when we run into an HPD
signal with a failing DDC probe usually gives enough time for the rest
of the connector's pins to make contact, and fixes this issue.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: add spin lock to protect freed list in vm (v2) 2015-12-04T18:08:13+00:00 jimqu Jim.Qu@amd.com 2015-12-04T09:17:00+00:00 81d75a30c6ed006a314f5c760196d04758660ca6 there is a protection fault about freed list when OCL test. add a spin lock to protect it. v2: drop changes in vm_fini Signed-off-by: JimQu <jim.qu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> 
there is a protection fault about freed list when OCL test.
add a spin lock to protect it.

v2: drop changes in vm_fini

Signed-off-by: JimQu <jim.qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2 2015-12-04T18:06:59+00:00 Christian König christian.koenig@amd.com 2015-12-03T19:54:35+00:00 9c97b5ab4a91c18c2e7654f044cbff446cfd979b The gtt_end is already inclusive, we don't need to subtract one here. v2 (chk): keep the fix for the VM code, cause here it really applies. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
The gtt_end is already inclusive, we don't need to subtract one here.

v2 (chk): keep the fix for the VM code, cause here it really applies.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: take a BO reference for the user fence 2015-12-04T18:05:44+00:00 Christian König christian.koenig@amd.com 2015-12-03T18:55:52+00:00 f3f1769283b8dbf047c678da95b72194ac2477a1 No need for a GEM reference here. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
No need for a GEM reference here.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: take a BO reference in the display code 2015-12-04T17:32:47+00:00 Christian König christian.koenig@amd.com 2015-12-03T18:55:51+00:00 e9d951a832d9a5db33f9d981a810a37f851f8b39 No need for the GEM reference here. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
No need for the GEM reference here.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: set snooped flags only on system addresses v2 2015-12-04T17:31:46+00:00 Christian König christian.koenig@amd.com 2015-12-04T12:32:55+00:00 6d99905a8c887f6c878f14af1475c3eefdcb0b3e Not necessary for VRAM. v2: no need to check if ttm is NULL. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Not necessary for VRAM.

v2: no need to check if ttm is NULL.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/nouveau: Fix pre-nv50 pageflip events (v4) 2015-12-04T03:49:38+00:00 Daniel Vetter daniel.vetter@ffwll.ch 2015-11-10T16:37:31+00:00 bbc8764f80eb872d2b36302882ddfc9882de4b16 Apparently pre-nv50 pageflip events happen before the actual vblank period. Therefore that functionality got semi-disabled in commit af4870e406126b7ac0ae7c7ce5751f25ebe60f28 Author: Mario Kleiner <mario.kleiner.de@gmail.com> Date: Tue May 13 00:42:08 2014 +0200 drm/nouveau/kms/nv04-nv40: fix pageflip events via special case. Unfortunately that hack got uprooted in commit cc1ef118fc099295ae6aabbacc8af94d8d8885eb Author: Thierry Reding <treding@nvidia.com> Date: Wed Aug 12 17:00:31 2015 +0200 drm/irq: Make pipe unsigned and name consistent Triggering a warning when trying to sample the vblank timestamp for a non-existing pipe. There's a few ways to fix this: - Open-code the old behaviour, which just enshrines this slight breakage of the userspace ABI. - Revert Mario's commit and again inflict broken timestamps, again not pretty. - Fix this for real by delaying the pageflip TS until the next vblank interrupt, thereby making it accurate. This patch implements the third option. Since having a page flip interrupt that happens when the pageflip gets armed and not when it completes in the next vblank seems to be fairly common (older i915 hw works very similarly) create a new helper to arm vblank events for such drivers. v2 (Mario Kleiner): - Fix function prototypes in drmP.h - Add missing vblank_put() for pageflip completion without pageflip event. - Initialize sequence number for queued pageflip event to avoid trouble in drm_handle_vblank_events(). - Remove dead code and spelling fix. v3 (Mario Kleiner): - Add a signed-off-by and cc stable tag per Ilja's advice. v4 (Thierry Reding): - Fix kerneldoc typo, discovered by Michel Dänzer - Rearrange tags and changelog Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=106431 Cc: Thierry Reding <treding@nvidia.com> Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: stable@vger.kernel.org # v4.3 Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 
Apparently pre-nv50 pageflip events happen before the actual vblank
period. Therefore that functionality got semi-disabled in

commit af4870e406126b7ac0ae7c7ce5751f25ebe60f28
Author: Mario Kleiner <mario.kleiner.de@gmail.com>
Date:   Tue May 13 00:42:08 2014 +0200

    drm/nouveau/kms/nv04-nv40: fix pageflip events via special case.

Unfortunately that hack got uprooted in

commit cc1ef118fc099295ae6aabbacc8af94d8d8885eb
Author: Thierry Reding <treding@nvidia.com>
Date:   Wed Aug 12 17:00:31 2015 +0200

    drm/irq: Make pipe unsigned and name consistent

Triggering a warning when trying to sample the vblank timestamp for a
non-existing pipe. There's a few ways to fix this:

- Open-code the old behaviour, which just enshrines this slight
  breakage of the userspace ABI.

- Revert Mario's commit and again inflict broken timestamps, again not
  pretty.

- Fix this for real by delaying the pageflip TS until the next vblank
  interrupt, thereby making it accurate.

This patch implements the third option. Since having a page flip
interrupt that happens when the pageflip gets armed and not when it
completes in the next vblank seems to be fairly common (older i915 hw
works very similarly) create a new helper to arm vblank events for
such drivers.

v2 (Mario Kleiner):
- Fix function prototypes in drmP.h
- Add missing vblank_put() for pageflip completion without
  pageflip event.
- Initialize sequence number for queued pageflip event to avoid
  trouble in drm_handle_vblank_events().
- Remove dead code and spelling fix.

v3 (Mario Kleiner):
- Add a signed-off-by and cc stable tag per Ilja's advice.

v4 (Thierry Reding):
- Fix kerneldoc typo, discovered by Michel Dänzer
- Rearrange tags and changelog

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=106431
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # v4.3
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>