linux.git/drivers/gpu/drm/vc4/Kconfig, branch v5.2

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

drm/vc4: add HDMI CEC support

2017-07-26T19:15:12+00:00

This patch adds support to VC4 for CEC.  It is under a separate
Kconfig option to keep everyone using VC4 from needing to pull in the
CEC core.

Thanks to Eric Anholt for providing me with the CEC register information.

Signed-off-by: Hans Verkuil 
Signed-off-by: Eric Anholt 
Reviewed-by: Eric Anholt 
Link: https://patchwork.freedesktop.org/patch/msgid/20170716104804.48308-4-hverkuil@xs4all.nl

drm/vc4: Switch DSI to the panel-bridge layer, and support bridges.

2017-06-05T09:37:37+00:00

The newer version of the RPi panel driver is going to be a combination
of a bridge and a panel, but we should also support panels without a
bridge, so the panel-bridge layer lets us do that cleanly.

v2: Drop "dev" argument.

Signed-off-by: Eric Anholt 
Acked-by: Daniel Vetter 
Reviewed-by: Boris Brezillon 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-2-eric@anholt.net

drm/vc4: Enable selection in Kconfig on any 32-bit BCM platform.

2017-05-16T16:42:20+00:00

With the Cygnus port, we needed to add at least "|| ARCH_BCM_CYGNUS"
to let the module get built on a cygnus-only kernel.  However, I
anticipate having a port for Kona soon, so just present the module on
all of BCM.

v2: Keep allowing selection with ARCH_BCM2835, since ARCH_BCM doesn't
    exist on arm64.

Signed-off-by: Eric Anholt 
Acked-by: Daniel Vetter  (v1)
Acked-by: Scott Branden 
Acked-by: Florian Fainelli 
Link: http://patchwork.freedesktop.org/patch/msgid/20170509181539.30278-1-eric@anholt.net

drm/vc4: Add HDMI audio support

2017-03-16T17:33:30+00:00

The HDMI encoder IP embeds all needed blocks to output audio, with a
custom DAI called MAI moving audio between the two parts of the HDMI
core.  This driver now exposes a sound card to let users stream audio
to their display.

Using the hdmi-codec driver has been considered here, but MAI meant
having to significantly rework hdmi-codec, and it would have left
little shared code with the I2S mode anyway.

The encoder requires that the audio be SPDIF-formatted frames only,
which alsalib will format-convert for us.

This patch is the combined work of Eric Anholt (initial register setup
with a separate dmaengine driver and using simple-audio-card) and
Boris Brezillon (moving it all into HDMI, massive debug to get it
actually working), and which Eric has the permission to release.

v2: Drop "-audio" from sound card name, since that's already implied
    (suggestion by Boris)

Signed-off-by: Eric Anholt 
Acked-by: Boris Brezillon 
Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-2-eric@anholt.net

drm/vc4: Add DSI driver

2017-02-01T20:51:23+00:00

The DSI0 and DSI1 blocks on the 2835 are related hardware blocks.
Some registers move around, and the featureset is slightly different,
as DSI1 (the 4-lane DSI) is a later version of the hardware block.
This driver doesn't yet enable DSI0, since we don't have any hardware
to test against, but it does put a lot of the register definitions and
code in place.

v2: Use the clk_hw interfaces, don't set CLK_IS_BASIC (from review by
    Stephen Boyd)

Signed-off-by: Eric Anholt 
Acked-by: Daniel Vetter  (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/20170131192912.11316-1-eric@anholt.net

drm/vc4: Add DPI driver

2016-04-14T19:22:53+00:00

The DPI interface involves taking a ton of our GPIOs to be used as
outputs, and routing display signals over them in parallel.

v2: Use display_info.bus_formats[] to replace our custom DT
    properties.
v3: Rebase on V3D documentation changes.
v4: Fix rebase detritus from V3D documentation changes.

Signed-off-by: Eric Anholt 
Acked-by: Rob Herring

dma-mapping: always provide the dma_map_ops based implementation

2016-01-21T01:09:18+00:00

Move the generic implementation to  now that all
architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now
that everyone supports them.

[valentinrothberg@gmail.com: remove leftovers in Kconfig]
Signed-off-by: Christoph Hellwig 
Cc: "David S. Miller" 
Cc: Aurelien Jacquiot 
Cc: Chris Metcalf 
Cc: David Howells 
Cc: Geert Uytterhoeven 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Helge Deller 
Cc: James Hogan 
Cc: Jesper Nilsson 
Cc: Koichi Yasutake 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Mikael Starvik 
Cc: Steven Miao 
Cc: Vineet Gupta 
Cc: Christian Borntraeger 
Cc: Joerg Roedel 
Cc: Sebastian Ott 
Signed-off-by: Valentin Rothberg 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER

2015-11-09T22:25:27+00:00

Avoid the following build errors, seen with m68k:allmodconfig and other
architectures which do not support HAVE_DMA_ATTRS.

ERROR: "drm_gem_cma_create" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_prime_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_prime_get_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_vm_ops" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_prime_vunmap" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_prime_import_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_prime_vmap" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_dumb_map_offset" [drivers/gpu/drm/vc4/vc4.ko] undefined!
ERROR: "drm_gem_cma_create" [drivers/gpu/drm/drm_kms_helper.ko] undefined!
ERROR: "drm_gem_cma_describe" [drivers/gpu/drm/drm_kms_helper.ko] undefined!
ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/drm_kms_helper.ko] undefined!

Acked-by: Eric Anholt 
Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Guenter Roeck 
Signed-off-by: Dave Airlie

drm/vc4: Add KMS support for Raspberry Pi.

2015-10-21T09:33:12+00:00

This is enough for fbcon and bringing up X using
xf86-video-modesetting.  It doesn't support the 3D accelerator or
power management yet.

v2: Drop FB_HELPER select thanks to Archit's patches.  Do manual init
    ordering instead of using the .load hook.  Structure registration
    more like tegra's, but still using the typical "component" code.
    Drop no-op hooks for atomic_begin and mode_fixup() now that
    they're optional.  Drop sentinel in Makefile.  Fix minor style
    nits I noticed on another reread.

v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
    of having a fixed video mode.  Use exynos-style component driver
    matching instead of devicetree nodes to list the component driver
    instances.  Rename compatibility strings to say bcm2835, and
    distinguish pv0/1/2.  Clean up some h/vsync code, and add in
    interlaced mode setup.  Fix up probe/bind error paths.  Use
    bitops.h macros for vc4_regs.h

v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
    that other bugs have been fixed, add timeouts to cpu_relax()
    loops, rename hpd-gpio to hpd-gpios.

Signed-off-by: Eric Anholt 
Acked-by: Daniel Vetter