linux.git/drivers/gpu/drm/tests, branch v6.14-rc2

Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel

2025-01-22T00:09:47+00:00

Pull drm updates from Dave Airlie:
 "There are two external interactions of note, the msm tree pull in some
  opp tree, hopefully the opp tree arrives from the same git tree
  however it normally does.

  There is also a new cgroup controller for device memory, that is used
  by drm, so is merging through my tree. This will hopefully help open
  up gpu cgroup usage a bit more and move us forward.

  There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.

  Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
  refactors across the board:

  core:
   - device memory cgroup controller added
   - Remove driver date from drm_driver
   - Add drm_printer based hex dumper
   - drm memory stats docs update
   - scheduler documentation improvements

  new driver:
   - amdxdna - Ryzen AI NPU support

  connector:
   - add a mutex to protect ELD
   - make connector setup two-step

  panels:
   - Introduce backlight quirks infrastructure
   - New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
   - Multi-Inno Technology MI1010Z1T-1CP11

  bridge:
   - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
   - Provide default implementation of atomic_check for HDMI bridges
   - it605: HDCP improvements, MCCS Support

  xe:
   - make OA buffer size configurable
   - GuC capture fixes
   - add ufence and g2h flushes
   - restore system memory GGTT mappings
   - ioctl fixes
   - SRIOV PF scheduling priority
   - allow fault injection
   - lots of improvements/refactors
   - Enable GuC's WA_DUAL_QUEUE for newer platforms
   - IRQ related fixes and improvements

  i915:
   - More accurate engine busyness metrics with GuC submission
   - Ensure partial BO segment offset never exceeds allowed max
   - Flush GuC CT receive tasklet during reset preparation
   - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
   - Fix DG1 power gate sequence
   - Enabling uncompressed 128b/132b UHBR SST
   - Handle hdmi connector init failures, and no HDMI/DP cases
   - More robust engine resets on Haswell and older

  i915/xe display:
   - HDCP fixes for Xe3Lpd
   - New GSC FW ARL-H/ARL-U
   - support 3 VDSC engines 12 slices
   - MBUS joining sanitisation
   - reconcile i915/xe display power mgmt
   - Xe3Lpd fixes
   - UHBR rates for Thunderbolt

  amdgpu:
   - DRM panic support
   - track BO memory stats at runtime
   - Fix max surface handling in DC
   - Cleaner shader support for gfx10.3 dGPUs
   - fix drm buddy trim handling
   - SDMA engine reset updates
   - Fix doorbell ttm cleanup
   - RAS updates
   - ISP updates
   - SDMA queue reset support
   - Rework DPM powergating interfaces
   - Documentation updates and cleanups
   - DCN 3.5 updates
   - Use a pm notifier to more gracefully handle VRAM eviction on
     suspend or hibernate
   - Add debugfs interfaces for forcing scheduling to specific engine
     instances
   - GG 9.5 updates
   - IH 4.4 updates
   - Make missing optional firmware less noisy
   - PSP 13.x updates
   - SMU 13.x updates
   - VCN 5.x updates
   - JPEG 5.x updates
   - GC 12.x updates
   - DC FAMS updates

  amdkfd:
   - GG 9.5 updates
   - Logging improvements
   - Shader debugger fixes
   - Trap handler cleanup
   - Cleanup includes
   - Eviction fence wq fix

  msm:
   - MDSS:
      - properly described UBWC registers
      - added SM6150 (aka QCS615) support
   - DPU:
      - added SM6150 (aka QCS615) support
      - enabled wide planes if virtual planes are enabled (by using two
        SSPPs for a single plane)
      - added CWB hardware blocks support
   - DSI:
      - added SM6150 (aka QCS615) support
   - GPU:
      - Print GMU core fw version
      - GMU bandwidth voting for a740 and a750
      - Expose uche trap base via uapi
      - UAPI error reporting

  rcar-du:
   - Add r8a779h0 Support

  ivpu:
   - Fix qemu crash when using passthrough

  nouveau:
   - expose GSP-RM logging buffers via debugfs

  panfrost:
   - Add MT8188 Mali-G57 MC3 support

  rockchip:
   - Gamma LUT support

  hisilicon:
   - new HIBMC support

  virtio-gpu:
   - convert to helpers
   - add prime support for scanout buffers

  v3d:
   - Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL

  vc4:
   - Add support for BCM2712

  vkms:
   - line-per-line compositing algorithm to improve performance

  zynqmp:
   - Add DP audio support

  mediatek:
   - dp: Add sdp path reset
   - dp: Support flexible length of DP calibration data

  etnaviv:
   - add fdinfo memory support
   - add explicit reset handling"

* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
  drm/bridge: fix documentation for the hdmi_audio_prepare() callback
  doc/cgroup: Fix title underline length
  drm/doc: Include new drm-compute documentation
  cgroup/dmem: Fix parameters documentation
  cgroup/dmem: Select PAGE_COUNTER
  kernel/cgroup: Remove the unused variable climit
  drm/display: hdmi: Do not read EDID on disconnected connectors
  drm/tests: hdmi: Add connector disablement test
  drm/connector: hdmi: Do atomic check when necessary
  drm/amd/display: 3.2.316
  drm/amd/display: avoid reset DTBCLK at clock init
  drm/amd/display: improve dpia pre-train
  drm/amd/display: Apply DML21 Patches
  drm/amd/display: Use HW lock mgr for PSR1
  drm/amd/display: Revised for Replay Pseudo vblank control
  drm/amd/display: Add a new flag for replay low hz
  drm/amd/display: Remove unused read_ono_state function from Hwss module
  drm/amd/display: Do not elevate mem_type change to full update
  drm/amd/display: Do not wait for PSR disable on vbl enable
  drm/amd/display: Remove unnecessary eDP power down
  ...

drm/tests: hdmi: Add connector disablement test

2025-01-14T17:46:37+00:00

Atomic check should succeed when disabling a connector. Add a test
case drm_test_check_disabling_connector() to make sure of this.

Suggested-by: Dmitry Baryshkov 
Signed-off-by: Liu Ying 
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-3-victor.liu@nxp.com
Signed-off-by: Maxime Ripard

drm/tests: connector: Add ycbcr_420_allowed tests

2025-01-13T09:18:20+00:00

Extend HDMI connector output format tests to verify its registration
succeeds only when the presence of YUV420 in the supported formats
matches the state of ycbcr_420_allowed flag.

Signed-off-by: Cristian Ciocaltea 
Reviewed-by: Dmitry Baryshkov 
Reviewed-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-4-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov

drm/mst: remove mgr parameter and debug logging from drm_dp_get_vc_payload_bw()

2025-01-07T16:43:18+00:00

The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.

There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.

Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.

v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)

Cc: Imre Deak 
Cc: Lyude Paul 
Reviewed-by: Imre Deak 
Acked-by: Maxime Ripard 
Acked-by: Thomas Zimmermann 
Signed-off-by: Jani Nikula 
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com

drm/tests: helpers: Fix compiler warning

2025-01-06T08:57:44+00:00

Delete one line break to make the format correct, resolving the
following warning during a W=1 build:

>> drivers/gpu/drm/tests/drm_kunit_helpers.c:324: warning: bad line: for a KUnit test

Fixes: caa714f86699 ("drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202501032001.O6WY1VCW-lkp@intel.com/
Reviewed-by: Kuan-Wei Chiu 
Tested-by: Kuan-Wei Chiu 
Reviewed-by: Dmitry Baryshkov 
Signed-off-by: Yu-Chun Lin 
Link: https://patchwork.freedesktop.org/patch/msgid/20250104165134.1695864-1-eleanor15x@gmail.com
Signed-off-by: Maxime Ripard

drm/tests: Add tests for drm_connector_dynamic_init()/register()

2024-12-17T14:12:04+00:00

Add kunit tests for
drm_connector_dynamic_init()/drm_connector_dynamic_register() added in
an earlier commit.

v2: Replace the reference to the patchset with "earlier commit". (Jani)

Suggested-by: Maxime Ripard 
Reviewed-by: Lyude Paul 
Reviewed-by: Jani Nikula 
Acked-by: Alex Deucher 
Reviewed-by: Maxime Ripard 
Signed-off-by: Imre Deak 
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-10-imre.deak@intel.com

drm/display: hdmi: add generic mode_valid helper

2024-12-05T12:36:01+00:00

Add drm_hdmi_connector_mode_valid(), generic helper for HDMI connectors.
It can be either used directly or as a part of the .mode_valid callback.

Reviewed-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-4-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/tests: hdmi: return meaningful value from set_connector_edid()

2024-12-05T12:36:00+00:00

The set_connector_edid() function returns a bogus 0, performing the
check on the connector->funcs->fill_modes() result internally. Make the
function pass the fill_modes()'s return value to the caller and move
corresponding checks to the caller site.

Reviewed-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-3-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/tests: hdmi: rename connector creation function

2024-12-05T12:36:00+00:00

As pointed out by Maxime, the drm_atomic_helper_connector_hdmi_init()
isn't a good name for a function inside KUnit tests. Rename it to
drm_kunit_helper_connector_hdmi_init().

Suggested-by: Maxime Ripard 
Reviewed-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-2-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/tests: hdmi: handle empty modes in find_preferred_mode()

2024-12-05T12:36:00+00:00

If the connector->modes list is empty, then list_first_entry() returns a
bogus entry. Change that to use list_first_entry_or_null().

Reviewed-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-1-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov