Pull drm updates from Dave Airlie:
 "Highlights:

   - Core DRM had a lot of refactoring around managed drm resources to
     make drivers simpler.

   - Intel Tigerlake support is on by default

   - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory

  Details:

  core:
   - uapi: error out EBUSY when existing master
   - uapi: rework SET/DROP MASTER permission handling
   - remove drm_pci.h
   - drm_pci* are now legacy
   - introduced managed DRM resources
   - subclassing support for drm_framebuffer
   - simple encoder helper
   - edid improvements
   - vblank + writeback documentation improved
   - drm/mm - optimise tree searches
   - port drivers to use devm_drm_dev_alloc

  dma-buf:
   - add flag for p2p buffer support

  mst:
   - ACT timeout improvements
   - remove drm_dp_mst_has_audio
   - don't use 2nd TX slot - spec recommends against it

  bridge:
   - dw-hdmi various improvements
   - chrontel ch7033 support
   - fix stack issues with old gcc

  hdmi:
   - add unpack function for drm infoframe

  fbdev:
   - misc fbdev driver fixes

  i915:
   - uapi: global sseu pinning
   - uapi: OA buffer polling
   - uapi: remove generated perf code
   - uapi: per-engine default property values in sysfs
   - Tigerlake GEN12 enabled.
   - Lots of gem refactoring
   - Tigerlake enablement patches
   - move to drm_device logging
   - Icelake gamma HW readout
   - push MST link retrain to hotplug work
   - bandwidth atomic helpers
   - ICL fixes
   - RPS/GT refactoring
   - Cherryview full-ppgtt support
   - i915 locking guidelines documented
   - require linear fb stride to be 512 multiple on gen9
   - Tigerlake SAGV support

  amdgpu:
   - uapi: encrypted GPU memory handling
   - uapi: add MEM_SYNC IB flag
   - p2p dma-buf support
   - export VRAM dma-bufs
   - FRU chip access support
   - RAS/SR-IOV updates
   - Powerplay locking fixes
   - VCN DPG (powergating) enablement
   - GFX10 clockgating fixes
   - DC fixes
   - GPU reset fixes
   - navi SDMA fix
   - expose FP16 for modesetting
   - DP 1.4 compliance fixes
   - gfx10 soft recovery
   - Improved Critical Thermal Faults handling
   - resizable BAR on gmc10

  amdkfd:
   - uapi: GWS resource management
   - track GPU memory per process
   - report PCI domain in topology

  radeon:
   - safe reg list generator fixes

  nouveau:
   - HD audio fixes on recent systems
   - vGPU detection (fail probe if we're on one, for now)
   - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
   - SVM improvements/fixes
   - NVIDIA format modifier support
   - Misc other fixes.

  adv7511:
   - HDMI SPDIF support

  ast:
   - allocate crtc state size
   - fix double assignment
   - fix suspend

  bochs:
   - drop connector register

  cirrus:
   - move to tiny drivers.

  exynos:
   - fix imported dma-buf mapping
   - enable runtime PM
   - fixes and cleanups

  mediatek:
   - DPI pin mode swap
   - config mipi_tx current/impedance

  lima:
   - devfreq + cooling device support
   - task handling improvements
   - runtime PM support

  pl111:
   - vexpress init improvements
   - fix module auto-load

  rcar-du:
   - DT bindings conversion to YAML
   - Planes zpos sanity check and fix
   - MAINTAINERS entry for LVDS panel driver

  mcde:
   - fix return value

  mgag200:
   - use managed config init

  stm:
   - read endpoints from DT

  vboxvideo:
   - use PCI managed functions
   - drop WC mtrr

  vkms:
   - enable cursor by default

  rockchip:
   - afbc support

  virtio:
   - various cleanups

  qxl:
   - fix cursor notify port

  hisilicon:
   - 128-byte stride alignment fix

  sun4i:
   - improved format handling"

* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
  drm/amd/display: Fix potential integer wraparound resulting in a hang
  drm/amd/display: drop cursor position check in atomic test
  drm/amdgpu: fix device attribute node create failed with multi gpu
  drm/nouveau: use correct conflicting framebuffer API
  drm/vblank: Fix -Wformat compile warnings on some arches
  drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
  drm/amd/display: Handle GPU reset for DC block
  drm/amdgpu: add apu flags (v2)
  drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
  drm/amdgpu: fix pm sysfs node handling (v2)
  drm/amdgpu: move gpu_info parsing after common early init
  drm/amdgpu: move discovery gfx config fetching
  drm/nouveau/dispnv50: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau/debugfs: fix runtime pm imbalance on error
  drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
  drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
  drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
  drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
  ...

When testing whether or not to enable the use of the SMMU, consult the
supported DMA mask rather than the actually configured DMA mask, since
the latter might already have been restricted.

Fixes: 2d9384ff9177 ("drm/tegra: Relax IOMMU usage criteria on old Tegra")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

According to https://www.analog.com/, the company name is spelled
"Analog Devices".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416103058.15269-4-geert+renesas@glider.be

The Tegra DRM drivers includes the legacy GPIO headers
<linux/gpio.h> and <linux/of_gpio.h> but what it really
uses is <linux/gpio/consumer.h> since only gpio_desc
structs are ever referenced.

Include the right header on the top level tegra/drm.h
file and drop all the surplus includes.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415122427.111769-1-linus.walleij@linaro.org

The tegra driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-16-tzimmermann@suse.de

Requested for getting some i915 fixes back into drm-misc-next by danvet.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/tegra: Changes for v5.7-rc1

This contains some minor cleanups, nothing too exciting.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313171042.2924890-1-thierry.reding@gmail.com

As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.

This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.

v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.

References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com

Since 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) there is no need to check the
return value of drm_debugfs_create_files(). Therefore, remove the
return checks and error handling of the drm_debugfs_create_files()
function from various debugfs init functions in drm/tegra and have
them return 0 directly.

v2: remove conversion of tegra_debugfs_init() to void to avoid build
breakage.

References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-2-wambui.karugax@gmail.com

Driver fails to probe with -EPROBE_DEFER, which produces a bit noisy error
message in KMSG during kernel's boot up. This happens because voltage
regulators tend to be probed later than the DRM driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>