linux.git/drivers/gpu/drm/stm/ltdc.c, branch v5.6 Linux kernel source tree drm/stm: ltdc: move pinctrl to encoder mode set 2019-12-20T12:30:42+00:00 Yannick Fertré yannick.fertre@st.com 2019-11-27T10:23:38+00:00 f412af187ae1a0171f779b4666557c60130e1976 The pin control must be set to default as soon as possible to establish a good video link between tv & bridge hdmi (encoder mode set is call before encoder enable). Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1574850218-13257-1-git-send-email-yannick.fertre@st.com 
The pin control must be set to default as soon as possible to
establish a good video link between tv & bridge hdmi
(encoder mode set is call before encoder enable).

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1574850218-13257-1-git-send-email-yannick.fertre@st.com
drm/stm: ltdc: add pinctrl for DPI encoder mode 2019-09-09T09:30:54+00:00 Yannick Fertré yannick.fertre@st.com 2019-09-06T09:21:48+00:00 92a57b3fb500e2b908f9b297efc41f55df110602 The implementation of functions encoder_enable and encoder_disable make possible to control the pinctrl according to the encoder type. The pinctrl must be activated only if the encoder type is DPI. This helps to move the DPI-related pinctrl configuration from all the panel or bridge to the LTDC dt node. Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1567761708-31777-1-git-send-email-yannick.fertre@st.com 
The implementation of functions encoder_enable and encoder_disable
make possible to control the pinctrl according to the encoder type.
The pinctrl must be activated only if the encoder type is DPI.
This helps to move the DPI-related pinctrl configuration from
all the panel or bridge to the LTDC dt node.

Reviewed-by: Philippe Cornu <philippe.cornu@st.com>

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1567761708-31777-1-git-send-email-yannick.fertre@st.com
drm/bridge: panel: Infer connector type from panel by default 2019-09-08T17:04:23+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2019-09-04T13:28:04+00:00 89958b7cd9555a5d82556cc9a1f4c62fffda6f96 The drm panel bridge creates a connector using a connector type explicitly passed by the display controller or bridge driver that instantiates the panel bridge. Now that drm_panel reports its connector type, we can use it to avoid passing an explicit (and often incorrect) connector type to drm_panel_bridge_add() and devm_drm_panel_bridge_add(). Several drivers report incorrect or unknown connector types to userspace. Reporting a different type may result in a breakage. For that reason, rename (devm_)drm_panel_bridge_add() to (devm_)drm_panel_bridge_add_typed(), and add new (devm_)drm_panel_bridge_add() functions that use the panel connector type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed function, they will be converted one by one after testing. The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection and fixes to indentation. @@ expression bridge; expression dev; expression panel; identifier type; @@ ( -bridge = drm_panel_bridge_add(panel, type); +bridge = drm_panel_bridge_add_typed(panel, type); | -bridge = devm_drm_panel_bridge_add(dev, panel, type); +bridge = devm_drm_panel_bridge_add_typed(dev, panel, type); ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com 
The drm panel bridge creates a connector using a connector type
explicitly passed by the display controller or bridge driver that
instantiates the panel bridge. Now that drm_panel reports its connector
type, we can use it to avoid passing an explicit (and often incorrect)
connector type to drm_panel_bridge_add() and
devm_drm_panel_bridge_add().

Several drivers report incorrect or unknown connector types to
userspace. Reporting a different type may result in a breakage. For that
reason, rename (devm_)drm_panel_bridge_add() to
(devm_)drm_panel_bridge_add_typed(), and add new
(devm_)drm_panel_bridge_add() functions that use the panel connector
type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed
function, they will be converted one by one after testing.

The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection and fixes to indentation.

@@
expression bridge;
expression dev;
expression panel;
identifier type;
@@
(
-bridge = drm_panel_bridge_add(panel, type);
+bridge = drm_panel_bridge_add_typed(panel, type);
|
-bridge = devm_drm_panel_bridge_add(dev, panel, type);
+bridge = devm_drm_panel_bridge_add_typed(dev, panel, type);
)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com
drm/stm: attach gem fence to atomic state 2019-07-25T10:00:09+00:00 Ahmad Fatoum a.fatoum@pengutronix.de 2019-07-12T08:42:28+00:00 8fabc9c3109a71b3577959a05408153ae69ccd8d To properly synchronize with other devices the fence from the GEM object backing the framebuffer needs to be attached to the atomic state, so the commit work can wait on fence signaling. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de 
To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de
drm/stm: support runtime power management 2019-06-07T12:45:22+00:00 Yannick Fertré yannick.fertre@st.com 2019-06-03T08:32:02+00:00 35ab6cfbf21178d4dd93d1fe4cb1416c1d6b566d This patch enables runtime power management (runtime PM) support for the display controller. pm_runtime_enable() and pm_runtime_disable() are added during ltdc load and unload respectively. pm_runtime_get_sync() and pm_runtime_put_sync() are added for ltdc register access. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1559550722-14091-1-git-send-email-yannick.fertre@st.com 
This patch enables runtime power management (runtime PM) support for
the display controller. pm_runtime_enable() and pm_runtime_disable()
are added during ltdc load and unload respectively.
pm_runtime_get_sync() and pm_runtime_put_sync() are added for ltdc
register access.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1559550722-14091-1-git-send-email-yannick.fertre@st.com
drm/stm: ltdc: No message if probe 2019-06-07T12:45:08+00:00 Yannick Fertré yannick.fertre@st.com 2019-06-03T08:31:34+00:00 630bec0c16ee0a003d5f1f55f228b7a495c1d938 Print display controller hardware version in debug mode only. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1559550694-14042-1-git-send-email-yannick.fertre@st.com 
Print display controller hardware version in debug mode only.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1559550694-14042-1-git-send-email-yannick.fertre@st.com
drm/stm: ltdc: restore calls to clk_{enable/disable} 2019-05-28T07:21:34+00:00 Benjamin Gaignard benjamin.gaignard@linaro.org 2019-05-27T11:58:30+00:00 cf57fdc8e42bd88dae1213a2bbe683d4b6c2190b Restore calls to clk_{enable/disable} deleted after applying the wrong version of the patch Fixes: fd6905fca4f0 ("drm/stm: ltdc: remove clk_round_rate comment") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190527115830.15836-1-benjamin.gaignard@st.com 
Restore calls to clk_{enable/disable} deleted after applying the wrong
version of the patch

Fixes: fd6905fca4f0 ("drm/stm: ltdc: remove clk_round_rate comment")

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527115830.15836-1-benjamin.gaignard@st.com
drm/stm: ltdc: remove clk_round_rate comment 2019-05-24T08:30:46+00:00 Yannick Fertré yannick.fertre@st.com 2019-05-10T15:03:20+00:00 fd6905fca4f013463026ca1a07fee463fbf0d974 Clk_round_rate returns rounded clock without changing the hardware in any way. This function couldn't replace set_rate/get_rate calls. Todo comment has been removed & a new log inserted. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1557500600-19771-1-git-send-email-yannick.fertre@st.com 
Clk_round_rate returns rounded clock without changing
the hardware in any way.
This function couldn't replace set_rate/get_rate calls.
Todo comment has been removed & a new log inserted.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1557500600-19771-1-git-send-email-yannick.fertre@st.com
drm: Remove users of drm_format_info_plane_cpp 2019-05-20T11:35:56+00:00 Maxime Ripard maxime.ripard@bootlin.com 2019-05-16T10:31:52+00:00 b0f986b4b025c8036ab2c660460621c1d17656b5 drm_format_info_plane_cpp() basically just returns the cpp array content found in the drm_format_info structure. Since it's pretty trivial, let's remove the function and have the users use the array directly Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c0a78c87cd0410a1819edad2794ad06543c85bb5.1558002671.git-series.maxime.ripard@bootlin.com 
drm_format_info_plane_cpp() basically just returns the cpp array content
found in the drm_format_info structure.

Since it's pretty trivial, let's remove the function and have the users use
the array directly

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c0a78c87cd0410a1819edad2794ad06543c85bb5.1558002671.git-series.maxime.ripard@bootlin.com
drm/fourcc: Pass the format_info pointer to drm_format_plane_cpp 2019-05-20T11:33:46+00:00 Maxime Ripard maxime.ripard@bootlin.com 2019-05-16T10:31:49+00:00 24c478ead0bf50a758e9dbecc7356e9eebf20271 So far, the drm_format_plane_cpp function was operating on the format's fourcc and was doing a lookup to retrieve the drm_format_info structure and return the cpp. However, this is inefficient since in most cases, we will have the drm_format_info pointer already available so we shouldn't have to perform a new lookup. Some drm_fourcc functions also already operate on the drm_format_info pointer for that reason, so the API is quite inconsistent there. Let's follow the latter pattern and remove the extra lookup while being a bit more consistent. In order to be extra consistent, also rename that function to drm_format_info_plane_cpp and to a static function in the header to match the current policy. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/32aa13e53dbc98a90207fd290aa8e79f785fb11e.1558002671.git-series.maxime.ripard@bootlin.com 
So far, the drm_format_plane_cpp function was operating on the format's
fourcc and was doing a lookup to retrieve the drm_format_info structure and
return the cpp.

However, this is inefficient since in most cases, we will have the
drm_format_info pointer already available so we shouldn't have to perform a
new lookup. Some drm_fourcc functions also already operate on the
drm_format_info pointer for that reason, so the API is quite inconsistent
there.

Let's follow the latter pattern and remove the extra lookup while being a
bit more consistent. In order to be extra consistent, also rename that
function to drm_format_info_plane_cpp and to a static function in the
header to match the current policy.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/32aa13e53dbc98a90207fd290aa8e79f785fb11e.1558002671.git-series.maxime.ripard@bootlin.com