linux.git/drivers/gpu/drm/panel, branch v6.5-rc2

Merge v6.5-rc1 into drm-misc-fixes

2023-07-11T07:23:20+00:00

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard

drm/panel: simple: Add Powertip PH800480T013 drm_display_mode flags

2023-06-30T09:39:50+00:00

Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC
flags. Those are used by various bridges in the pipeline to correctly
configure its sync signals polarity.

Fixes: d69de69f2be1 ("drm/panel: simple: Add Powertip PH800480T013 panel")
Signed-off-by: Marek Vasut 
Reviewed-by: Sam Ravnborg 
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201602.565948-1-marex@denx.de

drm/panel: Fine tune Starry-ili9882t panel HFP and HBP

2023-06-30T00:35:34+00:00

Because the setting of hporch is too small, there will be warning in
kernel log[1]. After fine tune the HFP and HBP, this warning can be
solved. The actual measurement frame rate is 60.1Hz.

[1]: WARNING kernel:[drm] HFP + HBP less than d-phy, FPS will under 60Hz

Fixes: 8716a6473e6c ("drm/panel: Support for Starry-ili9882t TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang 
Reviewed-by: Neil Armstrong 
Reviewed-by: Douglas Anderson 
Signed-off-by: Douglas Anderson 
Link: https://patchwork.freedesktop.org/patch/msgid/20230627050148.2045691-1-yangcong5@huaqin.corp-partner.google.com

drm/panel: simple: Add connector_type for innolux_at043tn24

2023-06-22T08:01:54+00:00

The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type'
information to avoid the following warning:

panel-simple panel: Specify missing connector_type

Signed-off-by: Fabio Estevam 
Fixes: 41bcceb4de9c ("drm/panel: simple: Add support for Innolux AT043TN24")
Reviewed-by: Sam Ravnborg 
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230620112202.654981-1-festevam@gmail.com

drm/panel: simple: add support for Rocktech RK043FN48H panel

2023-06-07T08:13:10+00:00

Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel.

Signed-off-by: Dario Binacchi 
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/
Reviewed-by: Jagan Teki 
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230607063139.621351-6-dario.binacchi@amarulasolutions.com

drm/panel: Support for Starry-ili9882t TDDI MIPI-DSI panel

2023-06-01T15:49:04+00:00

The Starry-ili9882 is a 10.51" WUXGA TFT panel. which fits in nicely with
the existing panel-boe-tv101wum-nl6 driver. From the datasheet,MIPI need
to keep the LP11 state before the lcm_reset pin is pulled high. So add
lp11_before_reset flag.

Signed-off-by: Cong Yang 
Reviewed-by: Douglas Anderson 
Signed-off-by: Douglas Anderson 
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-5-yangcong5@huaqin.corp-partner.google.com

drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel

2023-06-01T15:47:51+00:00

The Starry-himax83102-j02 is a 10.51" WUXGA TFT panel. which fits in nicely
with the existing panel-boe-tv101wum-nl6 driver. From the datasheet[1], MIPI
needs to keep the LP11 state before the lcm_reset pin is pulled high, so
increase lp11_before_reset flag.

[1]: https://github.com/HimaxSoftware/Doc/tree/main/Himax_Chipset_Power_Sequence

Signed-off-by: Cong Yang 
Reviewed-by: Douglas Anderson 
[dianders: removed some spacing on one line]
Signed-off-by: Douglas Anderson 
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-3-yangcong5@huaqin.corp-partner.google.com

drm/panel: khadas-ts050: update timings to achieve 60Hz refresh rate

2023-06-01T14:10:25+00:00

This updates the panel timings to achieve a clean 60Hz refresh rate.

Reviewed-by: Nicolas Belin 
Tested-by: Nicolas Belin  # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong 
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-13-56eb7a4d5b8e@linaro.org

drm/panel-edp: Convert to platform remove callback returning void

2023-05-31T02:32:04+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code.  However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

panel_edp_remove() always returned zero, so convert it to return void
without any loss and then just drop the return from
panel_edp_platform_remove().

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Douglas Anderson 
Signed-off-by: Douglas Anderson 
Link: https://patchwork.freedesktop.org/patch/msgid/20230530074216.2195962-1-u.kleine-koenig@pengutronix.de

drm: Switch i2c drivers back to use .probe()

2023-05-30T23:55:16+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Kieran Bingham 
Reviewed-by: Javier Martinez Canillas 
Reviewed-by: Martyn Welch 
Reviewed-by: Douglas Anderson 
Reviewed-by: Guenter Roeck 
Signed-off-by: Douglas Anderson 
Link: https://patchwork.freedesktop.org/patch/msgid/20230526090709.1517297-1-u.kleine-koenig@pengutronix.de