Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek <jonathan@marek.ca> [masneyb@onstation.org: checkpatch fixes; rename jdi,1080p-hammerhead binding to lg,acx467akm-7.] Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-2-masneyb@onstation.org
Add support for the OSD070T1718-19TS 7" 800x480 panel from One Stop Displays to the panel-simple driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them through the code. This effectively changes the value of the .sampling_edge bridge timings field in the dumb-vga-dac driver. This is safe to do as no driver consumes these values yet. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5). Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-4-git-send-email-eugen.hristev@microchip.com
This adds support for the 3.5" LCD panel from LeMaker, sold for use with BananaPi boards. It comes with a 24-bit RGB888 parallel interface and requires an active-low DE signal Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-7-contact@paulk.fr
The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Rob Herring <robh@kernel.org> [treding@nvidia.com: sort new entry alphabetically] Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540480173-12009-2-git-send-email-alex.gonzalez@digi.com
drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Having failed any attempts at a more generic solution, I fall back to the very specific solution: define a simple panel for the ARM RTSM emulated platforms. I am doing this so we can convert all old users from the previous fbdev driver to the PL111 DRM driver. This works fine as far as I can test, provided the device tree for RTSM AEMv8 is augmented accordingly. Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181026111334.3365-1-linus.walleij@linaro.org
As far as I can tell the panel that was added in commit da50bd4258db
("drm/panel: simple: Add Innolux TV123WAM panel driver support")
wasn't actually an Innolux TV123WAM but was actually an Innolux
P120ZDG-BF1.
As far as I can tell the Innolux TV123WAM isn't a real panel and but
it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1.
Let's unmosh.
Here's my evidence:
* Searching for TV123WAM on the Internet turns up a TI panel. While
it's possible that an Innolux panel has the same model number as the
TI Panel, it seems a little doubtful. Looking up the datasheet from
the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm.
* As far as I know, the patch adding the Innolux Panel was supposed to
be for the board that's sitting in front of me as I type this
(support for that board is not yet upstream). On the back of that
panel I see Innolux P120ZDZ-EZ1 rev B1.
* Someone pointed me at a datasheet that's supposed to be for the
panel in front of me (sorry, I can't share the datasheet). That
datasheet has the string "p120zdg-bf1"
* If I search for "P120ZDG-BF1" on the Internet I get hits for panels
that are 2160x1440. They don't have datasheets, but the fact that
the resolution matches is a good sign.
In any case, let's update the name and also the physical size to match
the correct panel.
Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support")
Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-6-dianders@chromium.org
If the HPD signal isn't hooked up to this panel we need a 200 ms delay. In the datasheet this is shown as the maximum time that HPD will take to be asserted after power is given to the panel. Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-3-dianders@chromium.org