The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for Microchip AC69T88A 5 inch TFT LCD 800x480
Display module with LVDS interface.The panel uses the Sitronix
ST7262 800x480 Display driver

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240919091548.430285-2-manikandan.m@microchip.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI
interface.

The LCD module specification can be found at:
https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240816085004.491494-3-victor.liu@nxp.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816085004.491494-3-victor.liu@nxp.com

The G070ACE-LH3 is a 7" TFT Color LCD module with WLED backlight.

https://www.data-modul.com/sites/default/files/products/G070ACE-LH3-specification-12058417.pdf

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240729-b4-v6-10-topic-innolux-v2-2-27d32c766ce5@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729-b4-v6-10-topic-innolux-v2-2-27d32c766ce5@pengutronix.de

Backmerging to get a late RC of v6.10 before moving into v6.11.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

At shutdown if you've got a _properly_ coded DRM modeset driver then
you'll get these two warnings at shutdown time:

  Skipping disable of already disabled panel
  Skipping unprepare of already unprepared panel

These warnings are ugly and sound concerning, but they're actually a
sign of a properly working system. That's not great.

We're not ready to get rid of the calls to drm_panel_disable() and
drm_panel_unprepare() because we're not 100% convinced that all DRM
modeset drivers are properly calling drm_atomic_helper_shutdown() or
drm_helper_force_disable_all() at the right times. However, having the
warning show up for correctly working systems is bad.

As a bit of a workaround, add some "if" tests to try to avoid the
warning on correctly working systems. Also add some comments and
update the TODO items in the hopes that future developers won't be too
confused by what's going on here.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621134427.1.Ieb287c2c3ee3f6d3b0d5f49b29f746b93621749c@changeid

drm-misc-next for $kernel-version:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - dp/mst: Fix daisy-chaining at resume
  - dsc: Add helper to dump the DSC configuration
  - tests: Add tests for the new monochrome TV mode variant

Driver Changes:
  - ast: Refactor the mode setting code
  - panfrost: Fix devfreq job reporting
  - stm: Add LDVS support, DSI PHY updates
  - panels:
    - New panel: AUO G104STN01, K&d kd101ne3-40ti,

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704-curvy-outstanding-lizard-bcea78@houat

The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.

Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Add support for the AUO G104STN01 10.4" (800x600) LCD-TFT panel.

Signed-off-by: Paul Gerber <paul.gerber@ew.tq-group.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240627084446.3197196-3-paul.gerber@ew.tq-group.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627084446.3197196-3-paul.gerber@ew.tq-group.com

KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in
timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags.
This aligns display_timing with panel_desc.

Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com