linux.git/drivers/gpu/drm/panel/Makefile, branch v5.17

drm/panel: Add Sony Tulip Truly NT35521 driver

2021-10-17T17:59:09+00:00

It adds a DRM panel driver for Sony Tulip Truly NT35521 5.24" 1280x720
DSI panel, which can be found on Sony Xperia M4 Aqua phone.  The panel
backlight is managed through DSI link.

The driver is built using linux-mdss-dsi-panel-driver-generator[1], and
additionally modeling the 5V control GPIOs with regulators and adding
Backlight GPIO support.

[1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator

Signed-off-by: Shawn Guo 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20210809051008.6172-3-shawn.guo@linaro.org

drm/panel: Add BOE BF060Y8M-AJ0 5.99" AMOLED panel driver

2021-10-17T17:14:54+00:00

This adds support for the BOE BF060Y8M-AJ0 5.99" AMOLED module
that can be found in some F(x)Tec Pro1 and Elephone U1 devices.

Signed-off-by: AngeloGioacchino Del Regno 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173115.998628-1-angelogioacchino.delregno@somainline.org

drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels

2021-10-17T17:06:54+00:00

Add a driver for panels using the Novatek NT35950 Display Driver IC,
including support for the Sharp LS055D1SX04, found in some Sony Xperia
Z5 Premium and XZ Premium smartphones.

Signed-off-by: AngeloGioacchino Del Regno 
Reviewed-by: Marijn Suijten 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-1-angelogioacchino.delregno@somainline.org

drm/panel: Add JDI R63452 MIPI DSI panel driver

2021-10-14T19:42:48+00:00

This adds support for the JDI R63452 Full HD LCD panel used on the
Xiaomi Mi 5 smartphone, in MIPI DSI command mode.

Signed-off-by: Raffaele Tranquillini 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20210925102911.518038-1-raffaele.tranquillini@gmail.com

drm/panel: Add support for Sharp LS060T1SX01 panel

2021-10-10T17:14:43+00:00

Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.

Signed-off-by: Dmitry Baryshkov 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-3-dmitry.baryshkov@linaro.org

Revert "drm/panel: Add support for Sharp LS060T1SX01 panel"

2021-10-09T17:15:26+00:00

This reverts commit
223cce88a926 ("drm/panel: Add support for Sharp LS060T1SX01 panel").

It was pushed to drm-misc-next by accident.
Added my own ack to expedit the revert.

Signed-off-by: Sam Ravnborg 
Acked-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-3-dmitry.baryshkov@linaro.org

drm/panel: Add support for Sharp LS060T1SX01 panel

2021-10-09T15:36:39+00:00

Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.

Signed-off-by: Dmitry Baryshkov 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20210926001005.3442668-3-dmitry.baryshkov@linaro.org

drm/panel-edp: Split eDP panels out of panel-simple

2021-09-20T16:22:05+00:00

The panel-simple driver handles way too much. Let's start trying to
get a handle on it by splitting out the eDP panels. This patch does
this:

1. Start by copying simple-panel verbatim over to a new driver,
   simple-panel-edp.
2. Rename "panel_simple" to "panel_edp" in the new driver.
3. Keep only panels marked with `DRM_MODE_CONNECTOR_eDP` in the new
   driver. Remove those panels from the old driver.
4. Remove all recent "DP AUX bus" stuff from the old driver. The DP
   AUX bus is only possible on DP panels.
5. Remove all DSI / MIPI related functions from the new driver.
6. Remove bus_format / bus_flags from eDP driver. These things don't
   seem to make any sense for eDP panels so let's stop filling in made
   up stuff.

In the end we end up with a bunch of duplicated code for now. Future
patches will try to address _some_ of this duplicated code though some
of it will be unavoidable.

NOTE: This may not actually move all eDP panels over to the new driver
since not all panels were properly marked with
`DRM_MODE_CONNECTOR_eDP`. A future patch will attempt to move wayward
panels I could identify but even so there may be some missed.

Suggested-by: Sam Ravnborg 
Signed-off-by: Douglas Anderson 
Acked-by: Sam Ravnborg 
Acked-by: Linus Walleij 
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.7.I0a2f75bb822d17ce06f5b147734764eeb0c3e3df@changeid

drm/panel: s6d27a1: Add driver for Samsung S6D27A1 display panel

2021-08-13T13:53:11+00:00

This adds a driver for Samsung S6D27A1 display controller and panel.
This panel is found in the Samsung GT-I8160 mobile phone,
and possibly some other mobile phones.

This display needs manufacturer commands to configure it;
the commands used in this driver were taken from downstream driver
by Gareth Phillips; sadly, there is almost no documentation on what they
actually do.

This driver re-uses the DBI infrastructure to communicate with the display.

This driver is heavily based on WideChips WS2401 display controller
driver by Linus Walleij and on other panel drivers for reference.

Signed-off-by: Markuss Broks 
[Up reset out time to 120 ms]
Signed-off-by: Linus Walleij 
Link: https://patchwork.freedesktop.org/patch/msgid/20210807133111.5935-3-markuss.broks@gmail.com

drm/panel: Add ilitek ili9341 panel driver

2021-08-05T09:09:23+00:00

This driver combines tiny/ili9341.c mipi_dbi_interface driver
with mipi_dpi_interface driver, can support ili9341 with serial
mode and parallel rgb interface mode by different dts bindings.

Signed-off-by: Dillon Min 
Reported-by: kernel test robot 
Reviewed-by: Linus Walleij 
Reviewed-by: Jagan Teki 
Signed-off-by: Linus Walleij 
Link: https://patchwork.freedesktop.org/patch/msgid/1627098243-2742-4-git-send-email-dillon.minfei@gmail.com