linux.git/drivers/gpu/drm/omapdrm, branch v3.11

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2013-07-09T23:04:31+00:00

Pull drm updates from Dave Airlie:
 "Okay this is the big one, I was stalled on the fbdev pull req as I
  stupidly let fbdev guys merge a patch I required to fix a warning with
  some patches I had, they ended up merging the patch from the wrong
  place, but the warning should be fixed.  In future I'll just take the
  patch myself!

  Outside drm:

  There are some snd changes for the HDMI audio interactions on haswell,
  they've been acked for inclusion via my tree.  This relies on the
  wound/wait tree from Ingo which is already merged.

  Major changes:

  AMD finally released the dynamic power management code for all their
  GPUs from r600->present day, this is great, off by default for now but
  also a huge amount of code, in fact it is most of this pull request.

  Since it landed there has been a lot of community testing and Alex has
  sent a lot of fixes for any bugs found so far.  I suspect radeon might
  now be the biggest kernel driver ever :-P p.s.  radeon.dpm=1 to enable
  dynamic powermanagement for anyone.

  New drivers:

  Renesas r-car display unit.

  Other highlights:

   - core: GEM CMA prime support, use new w/w mutexs for TTM
     reservations, cursor hotspot, doc updates
   - dvo chips: chrontel 7010B support
   - i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell),
     Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp
     support (this time for sure)
   - nouveau: async buffer object deletion, context/register init
     updates, kernel vp2 engine support, GF117 support, GK110 accel
     support (with external nvidia ucode), context cleanups.
   - exynos: memory leak fixes, Add S3C64XX SoC series support, device
     tree updates, common clock framework support,
   - qxl: cursor hotspot support, multi-monitor support, suspend/resume
     support
   - mgag200: hw cursor support, g200 mode limiting
   - shmobile: prime support
   - tegra: fixes mostly

  I've been banging on this quite a lot due to the size of it, and it
  seems to okay on everything I've tested it on."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits)
  drm/radeon/dpm: implement vblank_too_short callback for si
  drm/radeon/dpm: implement vblank_too_short callback for cayman
  drm/radeon/dpm: implement vblank_too_short callback for btc
  drm/radeon/dpm: implement vblank_too_short callback for evergreen
  drm/radeon/dpm: implement vblank_too_short callback for 7xx
  drm/radeon/dpm: add checks against vblank time
  drm/radeon/dpm: add helper to calculate vblank time
  drm/radeon: remove stray line in old pm code
  drm/radeon/dpm: fix display_gap programming on rv7xx
  drm/nvc0/gr: fix gpc firmware regression
  drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
  drm/radeon/dpm: implement force performance level for TN
  drm/radeon/dpm: implement force performance level for ON/LN
  drm/radeon/dpm: implement force performance level for SI
  drm/radeon/dpm: implement force performance level for cayman
  drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
  drm/radeon/dpm: add infrastructure to force performance levels
  drm/radeon: fix surface setup on r1xx
  drm/radeon: add support for 3d perf states on older asics
  drm/radeon: set default clocks for SI when DPM is disabled
  ...

drm/gem: add mutex lock when using drm_gem_mmap_obj

2013-06-28T02:30:15+00:00

The drm_gem_mmap_obj() has to be protected with dev->struct_mutex,
but some caller functions do not. So it adds mutex lock to missing
callers and adds assertion to check whether drm_gem_mmap_obj() is
called with mutex lock or not.

Signed-off-by: YoungJun Cho 
Signed-off-by: Seung-Woo Kim 
Signed-off-by: Kyungmin Park 
Reviewed-by: Maarten Lankhorst 
Reviewed-by: Laurent Pinchart 
Reviewed-by: Rob Clark 
Reviewed-by: Maarten Lankhorst 
Signed-off-by: Dave Airlie

drm/omap: drop the !FB_OMAP2 dep

2013-06-28T02:08:10+00:00

This ends up causing circularity and really let people shoot themselves
in the foot.

Acked-by: Rob Clark 
Signed-off-by: Dave Airlie

drm/omap: change "!CONFIG_FB_OMAP2" to "!FB_OMAP2"

2013-06-27T11:14:32+00:00

Signed-off-by: Paul Bolle 
Reviewed-by: Thierry Reding 
Signed-off-by: Dave Airlie

Merge tag 'v3.10-rc7' into drm-next

2013-06-27T10:40:44+00:00

Linux 3.10-rc7

The sdvo lvds fix in this -fixes pull

commit c3456fb3e4712d0448592af3c5d644c9472cd3c1
Author: Daniel Vetter 
Date:   Mon Jun 10 09:47:58 2013 +0200

    drm/i915: prefer VBT modes for SVDO-LVDS over EDID

has a silent functional conflict with

commit 990256aec2f10800595dddf4d1c3441fcd6b2616
Author: Ville Syrjälä 
Date:   Fri May 31 12:17:07 2013 +0000

    drm: Add probed modes in probe order

in drm-next. W simply need to add the vbt modes before edid modes, i.e. the
other way round than now.

Conflicts:
	drivers/gpu/drm/drm_prime.c
	drivers/gpu/drm/i915/intel_sdvo.c

drm/omap: DVI connector fix

2013-06-17T11:00:58+00:00

The omapdrm driver currently uses a string comparison to find out if the
display is a DVI display. This is not reliable, and as we now have a
specific display type for DVI, let's use that.

Signed-off-by: Tomi Valkeinen

OMAPDSS: output: increase refcount in find_output funcs

2013-06-17T11:00:53+00:00

Now that omap_dss_output has been combined into omap_dss_device, we can
add ref counting for the relevant output functions also.

This patch adds omap_dss_get_device() calls to the various find_output()
style functions. This, of course, means that the users of those
find_output functions need to do a omap_dss_put_device() after use.

Signed-off-by: Tomi Valkeinen

OMAPDSS: combine omap_dss_output into omap_dss_device

2013-06-17T11:00:51+00:00

We currently have omap_dss_device, which represents an external display
device, sometimes an external encoder, sometimes a panel. Then we have
omap_dss_output, which represents DSS's output encoder.

In the future with new display device model, we construct a video
pipeline from the display blocks. To accomplish this, all the blocks
need to be presented by the same entity.

Thus, this patch combines omap_dss_output into omap_dss_device. Some of
the fields in omap_dss_output are already found in omap_dss_device, but
some are not. This means we'll have DSS output specific fields in
omap_dss_device, which is not very nice. However, it is easier to just
keep those output specific fields there for now, and after transition to
new display device model is made, they can be cleaned up easier than
could be done now.

Signed-off-by: Tomi Valkeinen

OMAPDSS: Implement display (dis)connect support

2013-06-17T11:00:43+00:00

We currently have two steps in panel initialization and startup: probing
and enabling. After the panel has been probed, it's ready and can be
configured and later enabled.

This model is not enough with more complex display pipelines, where we
may have, for example, two panels, of which only one can be used at a
time, connected to the same video output.

To support that kind of scenarios, we need to add new step to the
initialization: connect.

This patch adds support for connecting and disconnecting panels. After
probe, but before connect, no panel ops should be called. When the
connect is called, a proper video pipeline is established, and the panel
is ready for use. If some part in the video pipeline is already
connected (by some other panel), the connect call fails.

One key difference with the old style setup is that connect() handles
also connecting to the overlay manager. This means that the omapfb (or
omapdrm) no longer needs to figure out which overlay manager to use, but
it can just call connect() on the panel, and the proper overlay manager
is connected by omapdss.

This also allows us to add back the support for dynamic switching
between two exclusive panels. However, the current panel device model is
not changed to support this, as the new device model is implemented in
the following patches and the old model will be removed. The new device
model supports dynamic switching.

Signed-off-by: Tomi Valkeinen

OMAPDRM: fix overlay manager handling

2013-06-17T11:00:43+00:00

Currently omapdrm creates crtcs, which map directly to DSS overlay
managers, only on demand at init time. This would make it difficult to
manage connecting the display entities in the future, as the code cannot
just search for a suitable overlay manager.

We cannot fix this the sane way, which would be to create crtcs for each
overlay manager, because we need an overlay for each crtc. With limited
number of overlays, that's not possible.

So the solution for now is to detach the overlay manager from the crtc.
crtcs are still created on demand at init time, but all overlay managers
are always initialized by the omapdss.

This way we can create and connect whole display pipelines from the
overlay manager to the display, regardless of which crtcs omapdrm would
create.

Signed-off-by: Tomi Valkeinen