Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
Updates for v6.14 MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support MDP4: - several small fixes DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - fixed modes filtering for platforms w/o 3DMux - fixed DSPP DSPP_2 / _3 links on several platforms - corrected DSPP definitions on SDM670 - added CWB hardware blocks support - added VBIF to DPU snapshots - dropped struct dpu_rm_requirements DP: - reworked DP audio support DSI: - added SM6150 (aka QCS615) support GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
kthread_create() creates a kthread without running it yet. kthread_run() creates a kthread and runs it. On the other hand, kthread_create_worker() creates a kthread worker and runs it. This difference in behaviours is confusing. Also there is no way to create a kthread worker and affine it using kthread_bind_mask() or kthread_affine_preferred() before starting it. Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]() that behaves just like kthread_run(). kthread_create_worker[_on_cpu]() will now only create a kthread worker without starting it. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
The use of of_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104190636.274926-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
Debugging incorrect UAPI usage tends to be a bit painful, so add a helper macro to make it easier to add debug logging which can be enabled at runtime via drm.debug. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/630578/
The call chain on a5xx_gpu_init is such that pdev is not going to be null, so the null check on pdev can be removed. This also cleans up a static analysis warning where pdev is dereferenced before the null check which cannot actually occur. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/624180/ Signed-off-by: Rob Clark <robdclark@chromium.org>
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337ef1 ("drm/msm: fix cmdstream size check")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This adds MSM_PARAM_UCHE_TRAP_BASE that will be used by Mesa implementation for VK_KHR_shader_clock and GL_ARB_shader_clock. Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com> Patchwork: https://patchwork.freedesktop.org/patch/627036/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Now all the DDR bandwidth voting via the GPU Management Unit (GMU) is in place, declare the Bus Control Modules (BCMs) and the corresponding parameters in the GPU info struct. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629401/ Signed-off-by: Rob Clark <robdclark@chromium.org>
The Adreno GPU Management Unit (GMU) can also scale the DDR Bandwidth along the Frequency and Power Domain level, until now we left the OPP core scale the OPP bandwidth via the interconnect path. In order to enable bandwidth voting via the GPU Management Unit (GMU), when an opp is set by devfreq we also look for the corresponding bandwidth index in the previously generated bw_table and pass this value along the frequency index to the GMU. The GMU also takes another vote called AB which is a 16bit quantized value of the floor bandwidth against the maximum supported bandwidth. The AB is calculated with a default 25% of the bandwidth like the downstream implementation too inform the GMU firmware the minimal quantity of bandwidth we require for this OPP. Only pass the AB vote starting from A750 GPUs. Since we now vote for all resources via the GMU, setting the OPP is no more needed, so we can completely skip calling dev_pm_opp_set_opp() in this situation. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/629397/ Signed-off-by: Rob Clark <robdclark@chromium.org>