Pull drm updates from Dave Airlie:
 "The biggest thing in this is the AMD Navi GPU support, this again
  contains a bunch of header files that are large. These are the new AMD
  RX5700 GPUs that just recently became available.

  New drivers:
   - ST-Ericsson MCDE driver
   - Ingenic JZ47xx SoC

  UAPI change:
   - HDR source metadata property

  Core:
   - HDR inforframes and EDID parsing
   - drm hdmi infoframe unpacking
   - remove prime sg_table caching into dma-buf
   - New gem vram helpers to reduce driver code
   - Lots of drmP.h removal
   - reservation fencing fix
   - documentation updates
   - drm_fb_helper_connector removed
   - mode name command handler rewrite

  fbcon:
   - Remove the fbcon notifiers

  ttm:
   - forward progress fixes

  dma-buf:
   - make mmap call optional
   - debugfs refcount fixes
   - dma-fence free with pending signals fix
   - each dma-buf gets an inode

  Panels:
   - Lots of additional panel bindings

  amdgpu:
   - initial navi10 support
   - avoid hw reset
   - HDR metadata support
   - new thermal sensors for vega asics
   - RAS fixes
   - use HMM rather than MMU notifier
   - xgmi topology via kfd
   - SR-IOV fixes
   - driver reload fixes
   - DC use a core bpc attribute
   - Aux fixes for DC
   - Bandwidth calc updates for DC
   - Clock handling refactor
   - kfd VEGAM support

  vmwgfx:
   - Coherent memory support changes

  i915:
   - HDR Support
   - HDMI i2c link
   - Icelake multi-segmented gamma support
   - GuC firmware update
   - Mule Creek Canyon PCH support for EHL
   - EHL platform updtes
   - move i915.alpha_support to i915.force_probe
   - runtime PM refactoring
   - VBT parsing refactoring
   - DSI fixes
   - struct mutex dependency reduction
   - GEM code reorg

  mali-dp:
   - Komeda driver features

  msm:
   - dsi vs EPROBE_DEFER fixes
   - msm8998 snapdragon 835 support
   - a540 gpu support
   - mdp5 and dpu interconnect support

  exynos:
   - drmP.h removal

  tegra:
   - misc fixes

  tda998x:
   - audio support improvements
   - pixel repeated mode support
   - quantisation range handling corrections
   - HDMI vendor info fix

  armada:
   - interlace support fix
   - overlay/video plane register handling refactor
   - add gamma support

  rockchip:
   - RX3328 support

  panfrost:
   - expose perf counters via hidden ioctls

  vkms:
   - enumerate CRC sources list

  ast:
   - rework BO handling

  mgag200:
   - rework BO handling

  dw-hdmi:
   - suspend/resume support

  rcar-du:
   - R8A774A1 Soc Support
   - LVDS dual-link mode support
   - Additional formats
   - Misc fixes

  omapdrm:
   - DSI command mode display support

  stm
   - fb modifier support
   - runtime PM support

  sun4i:
   - use vmap ops

  vc4:
   - binner bo binding rework

  v3d:
   - compute shader support
   - resync/sync fixes
   - job management refactoring

  lima:
   - NULL pointer in irq handler fix
   - scheduler default timeout

  virtio:
   - fence seqno support
   - trace events

  bochs:
   - misc fixes

  tc458767:
   - IRQ/HDP handling

  sii902x:
   - HDMI audio support

  atmel-hlcdc:
   - misc fixes

  meson:
   - zpos support"

* tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits)
  Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
  Revert "mm: adjust apply_to_pfn_range interface for dropped token."
  mm: adjust apply_to_pfn_range interface for dropped token.
  drm/amdgpu/navi10: add uclk activity sensor
  drm/amdgpu: properly guard the generic discovery code
  drm/amdgpu: add missing documentation on new module parameters
  drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
  drm/amd/display: avoid 64-bit division
  drm/amdgpu/psp11: simplify the ucode register logic
  drm/amdgpu: properly guard DC support in navi code
  drm/amd/powerplay: vega20: fix uninitialized variable use
  drm/amd/display: dcn20: include linux/delay.h
  amdgpu: make pmu support optional
  drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
  drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
  drm/amd/powerplay: Use memset to initialize metrics structs
  drm/amdgpu/mes10.1: Fix header guard
  drm/amd/powerplay: add temperature sensor support for navi10
  drm/amdgpu: fix scheduler timeout calc
  drm/amdgpu: Prepare for hmm_range_register API change (v2)
  ...

+ usual progress on cleanups
+ dsi vs EPROBE_DEFER fixes
+ msm8998 (snapdragon 835 support)
  + a540 gpu support (mesa support already landed)
  + dsi, dsi-phy support
+ mdp5 and dpu interconnect (bus/memory scaling) support
+ initial prep work for per-context pagetables (at least the parts that
  don't have external dependencies like iommu/arm-smmu)

There is one more patch for fixing DSI cmd mode panels (part of a set of
patches to get things working on nexus5), but it would be conflicty with
1cff7440a86e04a613665803b42034 in drm-next without rebasing or back-merge,
and since it doesn't conflict with anything in msm-next, I think it best
if Sean merges that through drm-mix-fixes instead.

(In other news, I've been making some progress w/ getting efifb working
properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff
not totally falling over when bootloader enables display and things are
already running when driver probes.. but not quite ready yet, hopefully
we can post some of that for 5.4.. should help for both the sdm835 and
sdm850 laptops.)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsj3N4XzDLSDoa+4RHZ9wXObYmhcep0M3LjnRg48BeLvg@mail.gmail.com

Use drm_atomic_helper_dirtyfb() as the dirty callback in the
msm_framebuffer_funcs struct. Call drm_plane_enable_fb_damage_clips()
when the planes are initialized in mdp4, mdp5, and dpu1.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang.  It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.

Fixes: 7198e6b03155 drm/msm: add a3xx gpu support
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>

If bind fails, we can call msm_drm_uninit before kms elements have been
created. In this case, drm_atomic_helper_shutdown will fail since there
are no drm objects. Only call drm unregistration and shutdown if drm is
registered.

Also while we're in here move the workqueue destruction to below
component_unbind since components could be actively using the wq during
uninit or in their unbind routine.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524202919.179289-1-sean@poorly.run

Now that the panel probe/setup is in the modeset path, we can call
dsi_manager_setup_encoder() in a common place for both internal and
external bridge setups.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-10-sean@poorly.run

Since deferred probe from the modeset init path now works, we can move
the panel initialization from detect() into connector init. This
avoids doing work in detect() and hopefully will result in a more
deterministic boot sequence between devices with a dsi panel, and those
with an external bridge.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-9-sean@poorly.run

Now that we have a function to call set_encoder_mode() for us, use it.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-8-sean@poorly.run

This patch moves things around a bit to be a little more readable and
pulls out the set_encoder_mode() call into its own function for later
use.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-7-sean@poorly.run

Pull all of the panel init code out of detect() and put it in its own
function. This will be useful in future patches where it's moved from
detect().

Reviewed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-6-sean@poorly.run