Pull drm updates from Dave Airlie:
 "Been a bit busy, first week of kids school, and waiting on other trees
  to go in before I could send this, so its a bit later than I'd
  normally like.

  Highlights:
   - core:
      timestamp fixes, lots of misc cleanups
   - new drivers:
      bochs virtual vga
   - vmwgfx:
      major overhaul for their nextgen virt gpu.
   - i915:
      runtime D3 on HSW, watermark fixes, power well work, fbc fixes,
      bdw is no longer prelim.
   - nouveau:
      gk110/208 acceleration, more pm groundwork, old overlay support
   - radeon:
      dpm rework and clockgating for CIK, pci config reset, big endian
      fixes
   - tegra:
      panel support and DSI support, build as module, prime.
   - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast:
      fixes
   - msm:
      hdmi support for mdp5"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits)
  drm/nouveau: resume display if any later suspend bits fail
  drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip
  drm/nouveau: implement hooks for needed for drm vblank timestamping support
  drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping
  drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
  drm/radeon/dce8: workaround for atom BlankCrtc table
  drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
  drm/radeon: set si_notify_smc_display_change properly
  drm/radeon: fix DAC interrupt handling on DCE5+
  drm/radeon: clean up active vram sizing
  drm/radeon: skip async dma init on r6xx
  drm/radeon/runpm: don't runtime suspend non-PX cards
  drm/radeon: add ring to fence trace functions
  drm/radeon: add missing trace point
  drm/radeon: fix VMID use tracking
  drm: ast,cirrus,mgag200: use drm_can_sleep
  drm/gma500: Lock struct_mutex around cursor updates
  drm/i915: Fix the offset issue for the stolen GEM objects
  DRM: armada: fix missing DRM_KMS_FB_HELPER select
  drm/i915: Decouple GPU error reporting from ring initialisation
  ...

This was hidden in a generic void * dev->mm_private. But only ever
used for gem. But thanks to this fake generic pretension no one
noticed that Rob's drm drivers are now all broken.

So just give the offset manager a type pointer and fix up msm, omapdrm
and tilcdc.

v2: Fixup compile fail.

v3: Fixup rebase fail that David spotted.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add support for adreno 330.  Not too much different, just a few
differences in initial configuration plus setting OCMEM base.
Userspace support is already in upstream mesa.

Note that the existing DT code is simply using the bindings from
downstream android kernel, to simplify porting of this driver to
existing devices.  These do not constitute any committed/stable
DT ABI.  The addition of proper DT bindings will be a subsequent
patch, at which point (as best as possible) I will try to support
either upstream bindings or what is found in downstream android
kernel, so that existing device DT files can be used.

Signed-off-by: Rob Clark <robdclark@gmail.com>

Add support for the new MDP5 display controller block.  The mapping
between parts of the display controller and KMS is:

  plane   -> PIPE{RGBn,VIGn}             \
  crtc    -> LM (layer mixer)            |-> MDP "device"
  encoder -> INTF                        /
  connector -> HDMI/DSI/eDP/etc          --> other device(s)

Unlike MDP4, it appears we can get by with a single encoder, rather
than needing a different implementation for DTV, DSI, etc.  (Ie. the
register interface is same, just different bases.)

Also unlike MDP4, all the IRQs for other blocks (HDMI, DSI, etc) are
routed through MDP.

And finally, MDP5 has this "Shared Memory Pool" (called "SMP"), from
which blocks need to be allocated to the active pipes based on fetch
stride.

Signed-off-by: Rob Clark <robdclark@gmail.com>

The HDMI block is basically the same between older SoC's with mdp4
display controller, and newer ones with mdp5.

So mostly this consists of better abstracting out the different sets of
regulators, clks, etc.  In particular, for regulators and clks we can
split it up by what is needed for hot plug detect to work, and what is
needed to light up the display.

Also, 8x74 has a new phy.. a very simple one, but split out into a
different mmio space.  And with mdp5, the irq is shared with mdp, so we
don't directly register our own irq handler.

Signed-off-by: Rob Clark <robdclark@gmail.com>

We'll want basically the same thing for mdp5, so refactor it out so it
can be shared.

Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

This can be shared between mdp4 and mdp5.  Both use the same set of
parameters to describe the format to the hw.

Signed-off-by: Rob Clark <robdclark@gmail.com>

resync to latest envytools db, add mdp5 registers

Signed-off-by: Rob Clark <robdclark@gmail.com>

There are some little bits and pieces that mdp4 and mdp5 can share, so
move things around so that we can have both in a common parent
directory.

Signed-off-by: Rob Clark <robdclark@gmail.com>