linux.git/drivers/gpu/drm/msm/hdmi, branch v6.0

Merge tag 'drm-msm-next-2022-07-10' of https://gitlab.freedesktop.org/drm/msm into drm-next

2022-07-13T00:55:53+00:00

Next for v5.20

GPU:
- a619 support
- Fix for unclocked GMU register access
- Devcore dump enhancements

Core:

- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings

DPU:

- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes

DP:

- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change

MDP5:

- MSM8953 perf data

HDMI:

- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups

Signed-off-by: Dave Airlie 
From: Rob Clark 
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com

drm/msm/hdmi: support attaching the "next" bridge

2022-07-04T18:05:30+00:00

There might be a chain of bridges attached to the HDMI node
(including but not limited to the display-connector bridge). Add support
for attaching them right to the HDMI bridge chain.

Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Stephen Boyd 
Patchwork: https://patchwork.freedesktop.org/patch/489709/
Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: drop empty bridge callbacks

2022-07-04T18:05:30+00:00

Drop empty callbacks msm_hdmi_bridge_enable() and
msm_hdmi_bridge_disable().

Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Stephen Boyd 
Patchwork: https://patchwork.freedesktop.org/patch/489707/
Link: https://lore.kernel.org/r/20220616085054.432317-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements

2022-07-04T18:05:30+00:00

Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface
clock (this is the same config as is used by the 8960).

Reviewed-by: Stephen Boyd 
Signed-off-by: Dmitry Baryshkov 
Patchwork: https://patchwork.freedesktop.org/patch/488863/
Link: https://lore.kernel.org/r/20220609122350.3157529-13-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: reuse MSM8960's config for MSM8660

2022-07-04T18:05:30+00:00

MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse
MSM8960's config for the MSM8660 (8x60).

Reviewed-by: Stephen Boyd 
Signed-off-by: Dmitry Baryshkov 
Patchwork: https://patchwork.freedesktop.org/patch/488864/
Link: https://lore.kernel.org/r/20220609122350.3157529-12-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: merge platform config for 8974/8084/8994/8996

2022-07-04T18:05:30+00:00

Since there is no more difference between the HDMI platform data
between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a
single entry.

Reviewed-by: Stephen Boyd 
Signed-off-by: Dmitry Baryshkov 
Patchwork: https://patchwork.freedesktop.org/patch/488868/
Link: https://lore.kernel.org/r/20220609122350.3157529-11-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: drop hpd_regs usage on 8x74/8084

2022-07-04T18:05:30+00:00

The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.

Reviewed-by: Stephen Boyd 
Signed-off-by: Dmitry Baryshkov 
Patchwork: https://patchwork.freedesktop.org/patch/488860/
Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: drop empty 'none' regulator lists

2022-07-04T18:05:30+00:00

Several platform configs use empty 'none' regulator arrays. They are not
necessary, as the code will use corresponding _cnt field and skip the
array completely. Drop them now.

Reviewed-by: Stephen Boyd 
Signed-off-by: Dmitry Baryshkov 
Patchwork: https://patchwork.freedesktop.org/patch/488861/
Link: https://lore.kernel.org/r/20220609122350.3157529-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform

2022-07-04T18:05:30+00:00

DB820c makes use of core-vcc-supply and core-vdda-supply, however the
driver code doesn't support these regulators. Enable them for HDMI on
8996 platform.

Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996")
Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Stephen Boyd 
Patchwork: https://patchwork.freedesktop.org/patch/488857/
Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov

drm/msm/hdmi: drop unused GPIO support

2022-07-04T18:05:30+00:00

The HDMI driver has code to configure extra GPIOs, which predates
pinctrl support. Nowadays all platforms should use pinctrl instead.
Neither of upstreamed Qualcomm platforms uses these properties, so it's
safe to drop them.

Reported-by: kernel test robot 
Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Stephen Boyd 
Patchwork: https://patchwork.freedesktop.org/patch/488858/
Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov