linux.git/drivers/gpu/drm/msm/dsi, branch for-next Linux kernel source tree Get rid of 'remove_new' relic from platform driver struct 2024-12-01T23:12:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-12-01T23:12:43+00:00 e70140ba0d2b1a30467d4af6bcfe761327b9ec95 The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculation 2024-10-14T20:16:17+00:00 Jonathan Marek jonathan@marek.ca 2024-10-07T05:01:49+00:00 358b762400bd94db2a14a72dfcef74c7da6bd845 When (mode->clock * 1000) is larger than (1<<31), int to unsigned long conversion will sign extend the int to 64 bits and the pclk_rate value will be incorrect. Fix this by making the result of the multiplication unsigned. Note that above (1<<32) would still be broken and require more changes, but its unlikely anyone will need that anytime soon. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/618434/ Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
When (mode->clock * 1000) is larger than (1<<31), int to unsigned long
conversion will sign extend the int to 64 bits and the pclk_rate value
will be incorrect.

Fix this by making the result of the multiplication unsigned.

Note that above (1<<32) would still be broken and require more changes, but
its unlikely anyone will need that anytime soon.

Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/618434/
Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dsi: improve/fix dsc pclk calculation 2024-10-14T20:16:17+00:00 Jonathan Marek jonathan@marek.ca 2024-10-07T05:01:48+00:00 24436a540d16ca6a523b8e5441180001c31b6b35 drm_mode_vrefresh() can introduce a large rounding error, avoid it. Fixes: 7c9e4a554d4a ("drm/msm/dsi: Reduce pclk rate for compression") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/618432/ Link: https://lore.kernel.org/r/20241007050157.26855-1-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> 
drm_mode_vrefresh() can introduce a large rounding error, avoid it.

Fixes: 7c9e4a554d4a ("drm/msm/dsi: Reduce pclk rate for compression")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/618432/
Link: https://lore.kernel.org/r/20241007050157.26855-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm/msm/dsi: correct programming sequence for SM8350 / SM8450 2024-09-01T23:53:44+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-08-04T05:40:07+00:00 1328cb7c34bf6d056df9ff694ee5194537548258 According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have different boundaries for pll_clock_inverters programming. Follow the vendor code and use correct values. Fixes: 2f9ae4e395ed ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/606947/ Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-3-1149dd8399fe@linaro.org 
According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have
different boundaries for pll_clock_inverters programming. Follow the
vendor code and use correct values.

Fixes: 2f9ae4e395ed ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/606947/
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-3-1149dd8399fe@linaro.org
drm/msm/dsi: Add phy configuration for MSM8937 2024-06-24T22:09:09+00:00 Daniil Titov daniilt971@gmail.com 2024-06-23T20:30:39+00:00 2df0161959d1c76a8f5fb2c2e6bce12d87f22848 Add phy configuration for 28nm dsi phy found on MSM8937 SoC. Only difference from existing msm8916 configuration is number of phy and io_start addresses. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Barnabás Czémán <trabarni@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/600518/ Link: https://lore.kernel.org/r/20240623-dsi-v2-4-a0ca70fb4846@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
Add phy configuration for 28nm dsi phy found on MSM8937 SoC. Only
difference from existing msm8916 configuration is number of phy
and io_start addresses.

Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600518/
Link: https://lore.kernel.org/r/20240623-dsi-v2-4-a0ca70fb4846@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/dsi: parse vsync source from device tree 2024-06-24T16:41:05+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-06-13T17:05:09+00:00 958d8d99ccb31ed5db02644bd138dbf70ace2051 Allow board's device tree to specify the vsync source (aka TE source). If the property is omitted, the display controller driver will use the default setting. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> [DB: fixed clearing of return value if there is no TE property] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/598740/ Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-6-67a0116b5366@linaro.org 
Allow board's device tree to specify the vsync source (aka TE source).
If the property is omitted, the display controller driver will use the
default setting.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: fixed clearing of return value if there is no TE property]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598740/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-6-67a0116b5366@linaro.org
drm/msm/dsi: drop unused GPIOs handling 2024-06-24T16:41:05+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-06-13T17:05:06+00:00 36aa1f2bef25719d9567215291832fa09df0eabe Neither disp-enable-gpios nor disp-te-gpios are defined in the schema. None of the board DT files use those GPIO pins. Drop them from the driver. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/598734/ Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-3-67a0116b5366@linaro.org 
Neither disp-enable-gpios nor disp-te-gpios are defined in the schema.
None of the board DT files use those GPIO pins. Drop them from the
driver.

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/598734/
Link: https://lore.kernel.org/r/20240613-dpu-handle-te-signal-v2-3-67a0116b5366@linaro.org
drm/msm/dsi: add a comment to explain pkt_per_line encoding 2024-06-22T22:15:39+00:00 Jonathan Marek jonathan@marek.ca 2024-05-30T05:56:50+00:00 294b3810059588aa9459b9125a6b080c76cd19b3 Make it clear why the pkt_per_line value is being "divided by 2". Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596236/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-6-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
Make it clear why the pkt_per_line value is being "divided by 2".

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596236/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-6-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/dsi: set VIDEO_COMPRESSION_MODE_CTRL_WC 2024-06-22T22:15:39+00:00 Jonathan Marek jonathan@marek.ca 2024-05-30T05:56:49+00:00 9ecd0ddd223b68b4603e4766a1d51f6c6cda346e Video mode DSC won't work if this field is not set correctly. Set it to fix video mode DSC (for slice_per_pkt==1 cases at least). Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596234/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-5-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
Video mode DSC won't work if this field is not set correctly. Set it to fix
video mode DSC (for slice_per_pkt==1 cases at least).

Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596234/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-5-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/dsi: set video mode widebus enable bit when widebus is enabled 2024-06-22T22:15:39+00:00 Jonathan Marek jonathan@marek.ca 2024-05-30T05:56:48+00:00 007870b8eaf54739c7b417ddaf90bf364b7e4bc8 The value returned by msm_dsi_wide_bus_enabled() doesn't match what the driver is doing in video mode. Fix that by actually enabling widebus for video mode. Fixes: efcbd6f9cdeb ("drm/msm/dsi: Enable widebus for DSI") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Patchwork: https://patchwork.freedesktop.org/patch/596232/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-4-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
The value returned by msm_dsi_wide_bus_enabled() doesn't match what the
driver is doing in video mode. Fix that by actually enabling widebus for
video mode.

Fixes: efcbd6f9cdeb ("drm/msm/dsi: Enable widebus for DSI")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Patchwork: https://patchwork.freedesktop.org/patch/596232/
Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-4-2ab1d334c657@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>