In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.

In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.

Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Make the dp/hdmi_audio_* callback maintain the same parameter order as
get_modes and edid_read: first the bridge, then the connector.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-2-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

If the Adreno device is used in a headless mode, there is no need to
build all KMS components. Build corresponding parts conditionally, only
selecting them if modeset support is actually required.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662581/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Data for HDMI, DSI and DP blocks only makes sense for the KMS parts of
the driver. Move corresponding data pointers from struct msm_drm_private
to struct msm_kms.

Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662580/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Add <linux/io.h> header to pull in readl/writel and friends.
This eliminates the following build errors:

drivers/gpu/drm/msm/dp/dp_panel.c: In function 'msm_dp_read_link':
drivers/gpu/drm/msm/dp/dp_panel.c:33:16: error: implicit declaration of function 'readl_relaxed' [-Wimplicit-function-declaration]
   33 |         return readl_relaxed(panel->link_base + offset);
drivers/gpu/drm/msm/dp/dp_panel.c: In function 'msm_dp_write_link':
drivers/gpu/drm/msm/dp/dp_panel.c:43:9: error: implicit declaration of function 'writel' [-Wimplicit-function-declaration]
   43 |         writel(data, panel->link_base + offset);

Fixes: 603fc0fc30bf ("drm/msm/dp: drop the msm_dp_catalog module")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/659442/
Link: https://lore.kernel.org/r/20250617185611.2965223-1-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Now as the msm_dp_catalog module became nearly empty, drop it, accessing
registers directly from the corresponding submodules.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/654332/
Link: https://lore.kernel.org/r/20250518-fd-dp-audio-fixup-v6-11-2f0ec3ec000d@oss.qualcomm.com

It makes it easier to keep all interrupts-related code in dp_ctrl
submodule. Move all functions to dp_ctrl.c.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/654330/
Link: https://lore.kernel.org/r/20250518-fd-dp-audio-fixup-v6-10-2f0ec3ec000d@oss.qualcomm.com

Move several misnamed functions accessing AUX bus to dp_aux.c, further
cleaning up dp_catalog submodule.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/654333/
Link: https://lore.kernel.org/r/20250518-fd-dp-audio-fixup-v6-9-2f0ec3ec000d@oss.qualcomm.com

Move CTRL-related functions to dp_ctrl.c, inlining one line wrappers
during this process. The enable/disable functions have been split to the
enable/disable or enter/exit pairs. The IRQ and HPD related functions
are left in dp_catalog.c, pending later cleanup.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/654328/
Link: https://lore.kernel.org/r/20250518-fd-dp-audio-fixup-v6-8-2f0ec3ec000d@oss.qualcomm.com

Move audio-related functions to dp_audio.c, following up the cleanup
done by the rest of the submodules. Inline functions with simple
register access patterns.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # sc7180-trogdor
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/654325/
Link: https://lore.kernel.org/r/20250518-fd-dp-audio-fixup-v6-7-2f0ec3ec000d@oss.qualcomm.com