linux.git/drivers/gpu/drm/msm/Makefile, branch v4.5

drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

2015-12-14T15:40:12+00:00

Add DSI PLL common clock framework clocks for 8960 PHY.

The PLL here is different from the ones found in B family msm chips. As
before, the DSI provides two clocks to the outside world. dsixpll and
dsixpllbyte (x = 1, 2). dsixpll is a regular clock divider, but
dsixpllbyte is modelled as a custom clock divider.

dsixpllbyte is the starting point of the PLL configuration. It is the
one that sets up the VCO clock rate. We need the VCO clock rate in the
form: F * byteclk, where F is a multiplication factor that varies on
the byte clock the DSI driver is trying to set. We use the custom
clk_ops for dsixpllbyte to ensure that the parent (VCO) is set at this
rate.

An additional divider (POSTDIV1) generates the bitclk. Since bit clock
can be derived from byteclock, we calculate it internally, and don't
expose it as a clock.

Cc: Stephen Boyd 
Signed-off-by: Archit Taneja 
Signed-off-by: Rob Clark

drm/msm/dsi: Add support for 28nm PHY on 8960

2015-12-14T15:40:06+00:00

DSI PHY on MSM8960 and APQ8064 is a 28nm PHY that's different from the
supported 28nm LP PHY found in newer chips.

Add support for the new PHY.

Signed-off-by: Archit Taneja 
Signed-off-by: Rob Clark

drm/msm/dsi: Add a mdp4 encoder for DSI

2015-12-14T15:39:40+00:00

Create an mdp4 incoder for DSI. Only DSI video mode is supported as of
now.

Signed-off-by: Archit Taneja 
Signed-off-by: Vinay Simha BN 
Signed-off-by: Rob Clark

drm/msm: Remove local fbdev emulation Kconfig option

2015-10-22T19:46:36+00:00

DRM_MSM_FBDEV config is used to enable/disable fbdev emulation for the
msm kms driver.

Replace this with the top level DRM_FBDEV_EMULATION config option where
applicable. This also prevents build breaks caused by undefined
drm_fb_helper_* functions when legacy fbdev support was disabled.

Signed-off-by: Archit Taneja 
Signed-off-by: Rob Clark

drm/msm/dsi: Introduce DSI configuration module

2015-08-15T22:27:29+00:00

With more platforms supported, the DSI host
configuration array keeps expanding. This change
moves those to a separate dsi_cfg module.

Signed-off-by: Hai Li 
Signed-off-by: Rob Clark

drm/msm/dsi: Make each PHY type compilation independent

2015-08-15T22:27:29+00:00

On a certain platform, only one type of DSI PHY is used.
This change allows the user to only compile the PHY type
which is being used.

Signed-off-by: Hai Li 
Signed-off-by: Rob Clark

drm/msm/dsi: Split PHY drivers to separate files

2015-08-15T22:27:28+00:00

This change moves each PHY type specific code into
separate files.

Signed-off-by: Hai Li 
Signed-off-by: Rob Clark

drm/msm/hdmi: add hdmi hdcp support (V3)

2015-08-15T22:27:10+00:00

Add HDMI HDCP support including HDCP PartI/II/III authentication.
V1: Initial Change
V2: Address Bjorn&Rob's comments
    Refactor the authentication process to use single work instead
    of multiple work for different authentication stages.
V3: Update to align with qcom SCM api.

Signed-off-by: Jilai Wang 
Signed-off-by: Rob Clark

drm/msm/dsi: Add DSI PLL clock driver support

2015-06-11T17:11:04+00:00

DSI byte clock and pixel clocks are sourced from DSI PLL.
This change adds the DSI PLL source clock driver under
common clock framework.

This change handles DSI 28nm PLL only.

Signed-off-by: Hai Li 
Signed-off-by: Archit Taneja 
Signed-off-by: Stephane Viau 
Signed-off-by: Wentao Xu 
Signed-off-by: Rob Clark

drm/msm/mdp5: Enable DSI connector in msm drm driver

2015-04-01T23:29:38+00:00

This change adds the support in mdp5 kms driver for single
and dual DSI. Dual DSI case depends on the framework API
and sequence change to support dual data path.

v1: Initial change
v2: Address Rob Clark's comment
- Separate command mode encoder to a new file mdp5_cmd_encoder.c
- Rebase to not depend on msm_drm_sub_dev change

Signed-off-by: Hai Li 
Signed-off-by: Rob Clark