linux.git/drivers/gpu/drm/mediatek, branch v5.8-rc2

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-05T02:56:20+00:00

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...

Merge tag 'mediatek-drm-next-5.8' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

2020-05-22T02:20:18+00:00

Mediatek DRM Next for Linux 5.8

This include dpi pin mode swap, config mipi_tx current and impedance,
and some fixup.

Signed-off-by: Dave Airlie 

From: Chun-Kuang Hu 
Link: https://patchwork.freedesktop.org/patch/msgid/20200521014612.17175-1-chunkuang.hu@kernel.org

drm/mediatek: Eliminate the magic number in array size

2020-05-20T16:10:08+00:00

Eiminate the magic number in array size, there macro defines in
hdmi.h.

Signed-off-by: Bernard Zhao 
Signed-off-by: Chun-Kuang Hu

drm/mediatek: Cleanup coding style in mediatek a bit

2020-05-20T16:10:08+00:00

This code change is to make code bit more readable.

Signed-off-by: Bernard Zhao 
Signed-off-by: Chun-Kuang Hu

drm/mediatek: Stop iterating dma addresses when sg_dma_len() == 0

2020-05-20T16:10:08+00:00

If dma_map_sg() merges pages when creating the mapping, only the first
entries will have a valid sg_dma_address() and sg_dma_len(), followed by
entries with sg_dma_len() == 0.

Signed-off-by: Anand K Mistry 
Signed-off-by: Anand K Mistry 
Signed-off-by: Chun-Kuang Hu

Merge tag 'drm-misc-next-2020-04-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2020-04-22T00:41:35+00:00

drm-misc-next for 5.8:

UAPI Changes:

  - drm: error out with EBUSY when device has existing master
  - drm: rework SET_MASTER and DROP_MASTER perm handling

Cross-subsystem Changes:

  - mm: export two symbols from slub/slob
  - fbdev: savage: fix -Wextra build warning
  - video: omap2: Use scnprintf() for avoiding potential buffer overflow

Core Changes:

  - Remove drm_pci.h
  - drm_pci_{alloc/free)() are now legacy
  - Introduce managed DRM resourcesA
  - Allow drivers to subclass struct drm_framebuffer
  - Introduce struct drm_afbc_framebuffer and helpers
  - fbdev: remove return value from generic fbdev setup
  - Introduce simple-encoder helper
  - vram-helpers: set fence on plane
  - dp_mst: ACT timeout improvements
  - dp_mst: Remove drm_dp_mst_has_audio()
  - TTM: ttm_trace_dma_{map/unmap}() cleanups
  - dma-buf: add flag for PCIP2P support
  - EDID: Various improvements
  - Encoder: cleanup semantics of possible_clones and possible_crtcs
  - VBLANK documentation updates
  - Writeback documentation updates

Driver Changes:

  - Convert several drivers to i2c_new_client_device()
  - Drop explicit drm_mode_config_cleanup() calls from drivers
  - Auto-release device structures with drmm_add_final_kfree()
  - Init bfdev console after registering DRM device
  - Make various .debugfs functions return 0 unconditionally; ignore errors
  - video: Use scnprintf() to avoid buffer overflows
  - Convert drivers to simple encoders

  - drm/amdgpu: note that we can handle peer2peer DMA-buf
  - drm/amdgpu: add support for exporting VRAM using DMA-buf v3
  - drm/kirin: Revert change to register connectors
  - drm/lima: Add optional devfreq and cooling device support
  - drm/lima: Various improvements wrt. task handling
  - drm/panel: nt39016: Support multiple modes and 50Hz
  - drm/panel: Support Leadtek LTK050H3146W
  - drm/rockchip: Add support for afbc
  - drm/virtio: Various cleanups
  - drm/hisilicon/hibmc: Enforce 128-byte stride alignment
  - drm/qxl: Fix notify port address of cursor ring buffer
  - drm/sun4i: Improvements to format handling
  - drm/bridge: dw-hdmi: Various improvements

Signed-off-by: Dave Airlie 

From: Thomas Zimmermann 
Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g

drm/mediatek: config mipitx impedance with calibration data

2020-04-21T23:10:36+00:00

Read calibration data from nvmem, and config mipitx impedance with
calibration data to make sure their impedance are 100ohm.

Signed-off-by: Jitao Shi 
Signed-off-by: Chun-Kuang Hu

drm/mediatek: add the mipitx driving control

2020-04-21T23:10:36+00:00

Add a property in device tree to control the driving by different
board.

Reviewed-by: Matthias Brugger 
Signed-off-by: Jitao Shi 
Signed-off-by: Chun-Kuang Hu

drm/mediatek: set dpi pin mode to gpio low to avoid leakage current

2020-04-20T22:31:53+00:00

Config dpi pins mode to output and pull low when dpi is disabled.
Aovid leakage current from some dpi pins (Hsync Vsync DE ... ).

Signed-off-by: Jitao Shi 
Signed-off-by: Chun-Kuang Hu

soc / drm: mediatek: Fix mediatek-drm device probing

2020-04-13T11:01:16+00:00

In the actual implementation the same compatible string
"mediatek,-mmsys" is used to bind the clock drivers
(drivers/soc/mediatek) as well as to the gpu driver
(drivers/gpu/drm/mediatek/mtk_drm_drv.c). This ends with the problem
that the only probed driver is the clock driver and there is no display
at all.

In any case having the same compatible string for two drivers is not
correct and should be fixed. To fix this, and maintain backward
compatibility, we can consider that the mmsys driver is the top-level
entry point for the multimedia subsystem, so is not a pure clock
controller but a system controller, and the drm driver is instantiated
by that MMSYS driver.

Signed-off-by: Enric Balletbo i Serra 
Reviewed-by: CK Hu 
Acked-by: CK Hu 
Signed-off-by: Matthias Brugger