<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/gpu/drm/imx, branch v6.16</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>drm/bridge: Add encoder parameter to drm_bridge_funcs.attach</title>
<updated>2025-03-20T13:45:38+00:00</updated>
<author>
<name>Maxime Ripard</name>
<email>mripard@kernel.org</email>
</author>
<published>2025-03-13T11:59:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=98007a0d56b07605c626c9bdb550b5ae5ce71453'/>
<id>98007a0d56b07605c626c9bdb550b5ae5ce71453</id>
<content type='text'>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.

However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge-&gt;encoder pointer, it's effectively
the same encoder the bridge was being attached to.

We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge-&gt;encoder in most drivers.

Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Tested-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Tested-by: Luca Ceresoli &lt;luca.ceresoli@bootlin.com&gt;
Reviewed-by: Luca Ceresoli &lt;luca.ceresoli@bootlin.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard &lt;mripard@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.

However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge-&gt;encoder pointer, it's effectively
the same encoder the bridge was being attached to.

We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge-&gt;encoder in most drivers.

Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Tested-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Tested-by: Luca Ceresoli &lt;luca.ceresoli@bootlin.com&gt;
Reviewed-by: Luca Ceresoli &lt;luca.ceresoli@bootlin.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard &lt;mripard@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/connector: make mode_valid take a const struct drm_display_mode</title>
<updated>2025-01-07T10:45:19+00:00</updated>
<author>
<name>Dmitry Baryshkov</name>
<email>dmitry.baryshkov@linaro.org</email>
</author>
<published>2024-12-14T13:37:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=26d6fd81916e62d2b0568d9756e5f9c33f0f9b7a'/>
<id>26d6fd81916e62d2b0568d9756e5f9c33f0f9b7a</id>
<content type='text'>
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.

Acked-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
Reviewed-by: Liviu Dudau &lt;liviu.dudau@arm.com&gt;
Reviewed-by: Raphael Gallais-Pou &lt;rgallaispou@gmail.com&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart+renesas@ideasonboard.com&gt;
Reviewed-by: Lyude Paul &lt;lyude@redhat.com&gt;
Reviewed-by: Maxime Ripard &lt;mripard@kernel.org&gt;
Reviewed-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Harry Wentland &lt;harry.wentland@amd.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.

Acked-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
Reviewed-by: Liviu Dudau &lt;liviu.dudau@arm.com&gt;
Reviewed-by: Raphael Gallais-Pou &lt;rgallaispou@gmail.com&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart+renesas@ideasonboard.com&gt;
Reviewed-by: Lyude Paul &lt;lyude@redhat.com&gt;
Reviewed-by: Maxime Ripard &lt;mripard@kernel.org&gt;
Reviewed-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Harry Wentland &lt;harry.wentland@amd.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge remote-tracking branch 'drm/drm-next' into drm-misc-next</title>
<updated>2024-12-09T15:35:21+00:00</updated>
<author>
<name>Maarten Lankhorst</name>
<email>dev@lankhorst.se</email>
</author>
<published>2024-12-09T15:28:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=33f029af89791f5d55cbfcb72a6c1b32a8905584'/>
<id>33f029af89791f5d55cbfcb72a6c1b32a8905584</id>
<content type='text'>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.

Backmerge in order to fix them before the next pull-request.

Include the fix from Stephen Roswell.

Caused by commit

  25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")

Interacting with commit

  cdd30ebb1b9f ("module: Convert symbol namespace to string literal")

Reported-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst &lt;dev@lankhorst.se&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.

Backmerge in order to fix them before the next pull-request.

Include the fix from Stephen Roswell.

Caused by commit

  25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")

Interacting with commit

  cdd30ebb1b9f ("module: Convert symbol namespace to string literal")

Reported-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst &lt;dev@lankhorst.se&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm: remove driver date from struct drm_driver and all drivers</title>
<updated>2024-12-05T10:35:42+00:00</updated>
<author>
<name>Jani Nikula</name>
<email>jani.nikula@intel.com</email>
</author>
<published>2024-12-04T14:31:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=cb2e1c2136f71618142557ceca3a8802e87a44cd'/>
<id>cb2e1c2136f71618142557ceca3a8802e87a44cd</id>
<content type='text'>
We stopped using the driver initialized date in commit 7fb8af6798e8
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.

Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.

v2: Also update drivers/accel (kernel test robot)

Reviewed-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Acked-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Acked-by: Simon Ser &lt;contact@emersion.fr&gt;
Acked-by: Jeffrey Hugo &lt;quic_jhugo@quicinc.com&gt;
Acked-by: Lucas De Marchi &lt;lucas.demarchi@intel.com&gt;
Acked-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt; # msm
Reviewed-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We stopped using the driver initialized date in commit 7fb8af6798e8
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.

Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.

v2: Also update drivers/accel (kernel test robot)

Reviewed-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Acked-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Acked-by: Simon Ser &lt;contact@emersion.fr&gt;
Acked-by: Jeffrey Hugo &lt;quic_jhugo@quicinc.com&gt;
Acked-by: Lucas De Marchi &lt;lucas.demarchi@intel.com&gt;
Acked-by: Dmitry Baryshkov &lt;dmitry.baryshkov@linaro.org&gt; # msm
Reviewed-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Get rid of 'remove_new' relic from platform driver struct</title>
<updated>2024-12-01T23:12:43+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-12-01T23:12:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e70140ba0d2b1a30467d4af6bcfe761327b9ec95'/>
<id>e70140ba0d2b1a30467d4af6bcfe761327b9ec95</id>
<content type='text'>
The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/client: Move public client header to clients/ subdirectory</title>
<updated>2024-11-15T08:42:13+00:00</updated>
<author>
<name>Thomas Zimmermann</name>
<email>tzimmermann@suse.de</email>
</author>
<published>2024-11-08T15:42:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b86711c6d6e20eb945fe878de98ef7c9be2c2088'/>
<id>b86711c6d6e20eb945fe878de98ef7c9be2c2088</id>
<content type='text'>
Move the public header file drm_client_setup.h to the clients/
subdirectory and update all drivers. No functional changes.

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Jocelyn Falempe &lt;jfalempe@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move the public header file drm_client_setup.h to the clients/
subdirectory and update all drivers. No functional changes.

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Jocelyn Falempe &lt;jfalempe@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/imx/dcss: include drm/drm_bridge.h header</title>
<updated>2024-11-04T13:35:34+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2024-10-28T16:35:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a88f9ed63b3cec761b04cba8104b2d0b2b66b25d'/>
<id>a88f9ed63b3cec761b04cba8104b2d0b2b66b25d</id>
<content type='text'>
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:

drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
   95 |         ret = drm_bridge_attach(encoder, bridge, NULL,
      |               ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
   96 |                                 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
      |                                 ^

Include the header directly.

Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
Signed-off-by: Maarten Lankhorst &lt;maarten.lankhorst@linux.intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:

drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
   95 |         ret = drm_bridge_attach(encoder, bridge, NULL,
      |               ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
   96 |                                 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
      |                                 ^

Include the header directly.

Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
Signed-off-by: Maarten Lankhorst &lt;maarten.lankhorst@linux.intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/imx/dcss: include drm/drm_bridge.h header</title>
<updated>2024-11-01T03:46:25+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2024-10-28T16:35:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=bcfe43f0ea77c42c2154fb79b99b7d1d82ac3231'/>
<id>bcfe43f0ea77c42c2154fb79b99b7d1d82ac3231</id>
<content type='text'>
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:

drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
   95 |         ret = drm_bridge_attach(encoder, bridge, NULL,
      |               ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
   96 |                                 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
      |                                 ^

Include the header directly.

Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Dave Airlie &lt;airlied@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:

drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
   95 |         ret = drm_bridge_attach(encoder, bridge, NULL,
      |               ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
   96 |                                 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
      |                                 ^

Include the header directly.

Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Dave Airlie &lt;airlied@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/imx/dcss: Allow build with COMPILE_TEST=y</title>
<updated>2024-10-25T07:23:55+00:00</updated>
<author>
<name>Ville Syrjälä</name>
<email>ville.syrjala@linux.intel.com</email>
</author>
<published>2024-10-03T11:18:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=004555a18d57fbad42553c2e98e00a054bbe618c'/>
<id>004555a18d57fbad42553c2e98e00a054bbe618c</id>
<content type='text'>
Allow imx/dcss to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.

Cc: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
Cc: Lucas Stach &lt;l.stach@pengutronix.de&gt;
Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-8-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allow imx/dcss to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.

Cc: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
Cc: Lucas Stach &lt;l.stach@pengutronix.de&gt;
Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-8-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/imx/dcss: Fix 64bit divisions</title>
<updated>2024-10-25T07:23:40+00:00</updated>
<author>
<name>Ville Syrjälä</name>
<email>ville.syrjala@linux.intel.com</email>
</author>
<published>2024-10-03T11:18:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=f2cab5a0e8c3a4a49dc5b0f7088bcc12d65e71e4'/>
<id>f2cab5a0e8c3a4a49dc5b0f7088bcc12d65e71e4</id>
<content type='text'>
Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.

Cc: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
Cc: Lucas Stach &lt;l.stach@pengutronix.de&gt;
Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-7-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.

Cc: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
Cc: Lucas Stach &lt;l.stach@pengutronix.de&gt;
Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-7-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu &lt;laurentiu.palcu@oss.nxp.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
