linux.git/drivers/gpu/drm/imx, branch v4.9-rc2 Linux kernel source tree Merge tag 'v4.8-rc8' into drm-next 2016-09-28T02:08:49+00:00 Dave Airlie airlied@redhat.com 2016-09-28T02:08:49+00:00 ca09fb9f60b5f3ab2d57e761aaeea89a5147d784 Linux 4.8-rc8 There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge it now to avoid troubles. * tag 'v4.8-rc8': (1442 commits) Linux 4.8-rc8 fault_in_multipages_readable() throws set-but-unused error mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing radix tree: fix sibling entry handling in radix_tree_descend() radix tree test suite: Test radix_tree_replace_slot() for multiorder entries fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx MIPS: Fix pre-r6 emulation FPU initialisation arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier. locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text nvme-rdma: only clear queue flags after successful connect i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended perf/core: Limit matching exclusive events to one PMU ... 
Linux 4.8-rc8

There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.

* tag 'v4.8-rc8': (1442 commits)
  Linux 4.8-rc8
  fault_in_multipages_readable() throws set-but-unused error
  mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
  radix tree: fix sibling entry handling in radix_tree_descend()
  radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
  fix memory leaks in tracing_buffers_splice_read()
  tracing: Move mutex to protect against resetting of seq data
  MIPS: Fix delay slot emulation count in debugfs
  MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
  mm: delete unnecessary and unsafe init_tlb_ubc()
  huge tmpfs: fix Committed_AS leak
  shmem: fix tmpfs to handle the huge= option properly
  blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
  MIPS: Fix pre-r6 emulation FPU initialisation
  arm64: kgdb: handle read-only text / modules
  arm64: Call numa_store_cpu_info() earlier.
  locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
  nvme-rdma: only clear queue flags after successful connect
  i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
  perf/core: Limit matching exclusive events to one PMU
  ...
drm/imx: fix crtc vblank state regression 2016-08-30T06:35:22+00:00 Lucas Stach l.stach@pengutronix.de 2016-08-29T15:51:24+00:00 a474478642d57641ea06645104a15acc0420f01a The atomic conversion lost the notification to let the DRM core know about the current state of the CRTC vblank interrupts. This regressed the ability of the core to reject page flip attempts on currently disabled CRTCs. Add back the notifications. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
The atomic conversion lost the notification to let the DRM core
know about the current state of the CRTC vblank interrupts. This
regressed the ability of the core to reject page flip attempts
on currently disabled CRTCs. Add back the notifications.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: parallel-display: detach bridge or panel on unbind 2016-08-29T14:30:48+00:00 Philipp Zabel p.zabel@pengutronix.de 2016-08-29T09:13:27+00:00 c15d493cb636f331898f40c5c6989e9deee62b09 Don't leave any bridge or panel attached to a stale driver instance when unbinding, to allow reattachment on a rebind. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
Don't leave any bridge or panel attached to a stale driver instance
when unbinding, to allow reattachment on a rebind.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: imx-ldb: detach bridge on unbind 2016-08-29T14:30:48+00:00 Philipp Zabel p.zabel@pengutronix.de 2016-08-29T09:12:30+00:00 60203c90bfec627b619643523cbc17f0005964f7 Don't leave the bridge attached to a stale driver instance when unbinding, to allow reattachment on a rebind. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
Don't leave the bridge attached to a stale driver instance when
unbinding, to allow reattachment on a rebind.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: imx-ldb: detach panel on unbind 2016-08-29T14:30:48+00:00 Lucas Stach l.stach@pengutronix.de 2016-06-16T09:19:41+00:00 b1318d50a0dddda4f4facfedf757a5a328ddfd94 Make sure to leave a clean panel state behind and allow to properly attach to the panel again on a rebind. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
Make sure to leave a clean panel state behind and allow to
properly attach to the panel again on a rebind.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: Add active plane reconfiguration support 2016-08-29T14:21:18+00:00 Liu Ying gnuiyl@gmail.com 2016-08-15T08:41:13+00:00 c6c1f9bc798bee7cfc2e172cd2c9b48187d801a7 We don't support configuring active plane on-the-fly for imx-drm. The relevant CRTC should be disabled before the plane configuration. Of course, the plane itself should be disabled as well. This patch adds active plane reconfiguration support by forcing CRTC mode change and disabling-enabling plane in plane's ->atomic_update callback. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
We don't support configuring active plane on-the-fly for imx-drm.
The relevant CRTC should be disabled before the plane configuration.
Of course, the plane itself should be disabled as well.
This patch adds active plane reconfiguration support by forcing CRTC
mode change and disabling-enabling plane in plane's ->atomic_update
callback.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: add exclusive fence to plane state 2016-08-29T10:45:05+00:00 Lucas Stach l.stach@pengutronix.de 2016-08-11T09:18:51+00:00 a40e65b76430a6ce0bb22ed8327c56dd5044a4a3 This allows the atomic helper to wait on them, instead of open-coding the same in the imx-drm driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
This allows the atomic helper to wait on them, instead of open-coding
the same in the imx-drm driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: fold ipu_plane_disable into ipu_disable_plane 2016-08-29T10:45:05+00:00 Lucas Stach l.stach@pengutronix.de 2016-08-11T09:18:50+00:00 df4b2233ab387fc508f4206cdf5546570136ebd0 ipu_disable_plane is the only left caller of ipu_plane_disable. Having those 2 similar named functions is confusing and superfluous, so fold them into 1. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
ipu_disable_plane is the only left caller of ipu_plane_disable.
Having those 2 similar named functions is confusing and superfluous,
so fold them into 1.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: don't destroy mode objects manually on driver unbind 2016-08-29T10:45:05+00:00 Lucas Stach l.stach@pengutronix.de 2016-08-11T09:18:49+00:00 8e3b16e2117409625b89807de3912ff773aea354 Instead let drm_mode_config_cleanup() do the work when taking down the master device. This requires all cleanup functions to be properly hooked up to the mode object .destroy callback. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
Instead let drm_mode_config_cleanup() do the work when taking down
the master device. This requires all cleanup functions to be
properly hooked up to the mode object .destroy callback.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm/imx: drop deprecated load/unload drm_driver ops 2016-08-29T10:45:05+00:00 Lucas Stach l.stach@pengutronix.de 2016-08-11T09:18:48+00:00 54db5decce17b3258475a011a00b9c5c51c57a35 Drop the load/unload driver ops, as they are deprecated because of their inherent races, with devices being visible to userspace before they are fully initialized. Move this code into the driver bind/unbind routines bracketed by the proper drm_dev_alloc/register and drm_dev_unregister/unref calls. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> 
Drop the load/unload driver ops, as they are deprecated because of their
inherent races, with devices being visible to userspace before they are
fully initialized.

Move this code into the driver bind/unbind routines bracketed by the
proper drm_dev_alloc/register and drm_dev_unregister/unref calls.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>