linux.git/drivers/gpu/drm/hisilicon, branch master

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of  by the more specific
 where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.

Acked-by: Danilo Krummrich 
Acked-by: Takashi Sakamoto 
Acked-by: Bjorn Helgaas 
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub)

drm/hisilicon/kirin: switch to of_drm_get_bridge_by_endpoint()

2026-05-19T08:57:25+00:00

This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().

Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. Here the bridge pointer is
only stored in a temporary variable, so a cleanup action is enough.

Reviewed-by: Louis Chauvet 
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-4-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli

drm/hisilicon/hibmc: use clock to look up the PLL value

2026-05-13T06:54:30+00:00

In the past, we use width and height to look up our PLL value.
But actually the actual clock check is also necessnary. There are
some resolutions that width and height same, but its clock different.
Add the clock check when using pll_table to determine the PLL value.

Fixes: da52605eea8f ("drm/hisilicon/hibmc: Add support for display engine")
Signed-off-by: Lin He 
Signed-off-by: Yongbang Shi 
Reviewed-by: Thomas Zimmermann 
Signed-off-by: Thomas Zimmermann 
Link: https://patch.msgid.link/20260509032302.2057227-5-shiyongbang@huawei.com

drm/hisilicon/hibmc: move display contrl config to hibmc_probe()

2026-05-13T06:54:29+00:00

If there's no VGA output, this encoder modeset won't be called, which
will cause displaying data from GPU being cut off. It's actually a
common display config for DP and VGA, so move the vdac encoder modeset
to driver load stage.

Removed invalid bit configurations from `hibmc_display_ctrl`

Fixes: 5294967f4ae4 ("drm/hisilicon/hibmc: Add support for VDAC")
Signed-off-by: Lin He 
Signed-off-by: Yongbang Shi 
Reviewed-by: Thomas Zimmermann 
Signed-off-by: Thomas Zimmermann 
Link: https://patch.msgid.link/20260509032302.2057227-4-shiyongbang@huawei.com

drm/hisilicon/hibmc: fix no showing when no connectors connected

2026-05-13T06:54:28+00:00

Our chip support KVM over IP feature, so hibmc driver need to support
displaying without any connectors plugged in. If no connectors are
connected, the vdac connector status should be set to 'connected' to
ensure proper KVM display functionality. Additionally, for
previous-generation products that may lack hardware link support and
thus cannot detect the monitor, the same approach should be applied
to ensure VGA display functionality.

* Add phys_state in the struct of dp and vdac to check physical outputs.

* The 'epoch_counter' of the vdac connector is incremented when the
physical status changes.

For get_modes: using BMC modes for connector if no display is attached to
phys VGA cable, otherwise use EDID modes by drm_connector_helper_get_modes,
because KVM doesn't provide EDID reads.

The polling mechanism for the KMS helper is enabled.

Fixes: 4c962bc929f1 ("drm/hisilicon/hibmc: Add vga connector detect functions")
Reported-by: Thomas Zimmermann 
Closes: https://lore.kernel.org/all/0eb5c509-2724-4c57-87ad-74e4270d5a5a@suse.de/
Signed-off-by: Lin He 
Signed-off-by: Yongbang Shi 
Reviewed-by: Thomas Zimmermann 
Tested-by: Thomas Zimmermann 
Signed-off-by: Thomas Zimmermann 
Link: https://patch.msgid.link/20260509032302.2057227-3-shiyongbang@huawei.com

drm/hisilicon/hibmc: add updating link cap in DP detect()

2026-05-13T06:54:27+00:00

In the past, the link cap is updated in link training at encoder enable
stage, but the hibmc_dp_mode_valid() is called before it, which will use
DP link's rate and lanes. So add the hibmc_dp_update_caps() in
hibmc_dp_update_caps() to avoid some potential risks.

Fixes: 607805abfb74 ("drm/hisilicon/hibmc: add dp mode valid check")
Signed-off-by: Lin He 
Signed-off-by: Yongbang Shi 
Acked-by: Thomas Zimmermann 
Signed-off-by: Thomas Zimmermann 
Link: https://patch.msgid.link/20260509032302.2057227-2-shiyongbang@huawei.com

drm: Rename struct drm_atomic_state to drm_atomic_commit

2026-05-04T04:05:04+00:00

The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.

Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.

We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.

This patch was created using:

rg -l drm_atomic_state | \
	xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c

Acked-by: Simona Vetter 
Acked-by: Thomas Zimmermann 
Acked-by: Jani Nikula 
Reviewed-by: Luca Ceresoli 
Tested-by: Luca Ceresoli 
Signed-off-by: Maxime Ripard 
Signed-off-by: Dave Airlie 
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org

drm/hisilicon/hibmc: Adding reset colorbar cfg in dp init.

2026-01-20T08:53:14+00:00

Add colorbar disable operation before reset chontroller, to make sure
colorbar status is clear in the DP init, so if rmmod the driver and the
previous colorbar configuration will not affect the next time insmod the
driver.

Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li 
Signed-off-by: Yongbang Shi 
Reviewed-by: Dmitry Baryshkov 
Reviewed-by: Tao Tian 
Link: https://patch.msgid.link/20251210023759.3944834-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov

drm/hisilicon/hibmc: fix no showing problem with loading hibmc manually

2026-01-20T08:53:14+00:00

When using command rmmod and insmod, there is no showing in second time
insmoding. Because DP controller won't send HPD signals, if connection
doesn't change or controller isn't reset. So add reset before unreset
in hibmc_dp_hw_init().

And also need to move the HDCP cfg after DP controller de-resets, so
that HDCP configuration takes effect.

Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li 
Signed-off-by: Yongbang Shi 
Reviewed-by: Dmitry Baryshkov 
Reviewed-by: Tao Tian 
Link: https://patch.msgid.link/20251210023759.3944834-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov

drm/hisilicon/hibmc: add dp mode valid check

2026-01-20T08:53:14+00:00

If DP is connected, check the DP BW in mode_valid_ctx() to ensure
that DP's link rate supports high-resolution data transmission.

Fixes: 0ab6ea261c1f ("drm/hisilicon/hibmc: add dp module in hibmc")
Signed-off-by: Baihan Li 
Signed-off-by: Yongbang Shi 
Reviewed-by: Dmitry Baryshkov 
Reviewed-by: Tao Tian 
Link: https://patch.msgid.link/20251210023759.3944834-3-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov