Add support to dump GEM stats to fdinfo.

v2: Fix typos, change size units to match docs, use div_u64
v3: Do it in core
v4: more kerneldoc
v5: doc fixes
v6: Actually use u64, bit more comment docs

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524155956.382440-6-robdclark@gmail.com

Handle a bit of the boiler-plate in a single case, and make it easier to
add some core tracked stats.  This also ensures consistent behavior
across drivers for standardised fields.

v2: Update drm-usage-stats.rst, 64b client-id, rename drm_show_fdinfo
v3: Rebase on drm-misc-next

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524155956.382440-3-robdclark@gmail.com

Thread group id (aka pid from userspace point of view) is a more
interesting thing to show as an owner of a DRM fd, so track and show that
instead of the thread id.

In the next patch we will make the owner updated post file descriptor
handover, which will also be tgid based to avoid ping-pong when multiple
threads access the fd.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314141904.1210824-2-tvrtko.ursulin@linux.intel.com

drm-misc-next for v6.3:

UAPI Changes:

 * fourcc: Document Open Source user waiver

Cross-subsystem Changes:

 * firmware: fix color-format selection for system framebuffers

Core Changes:

 * format-helper: Add conversion from XRGB8888 to various sysfb formats;
   Make XRGB8888 the only driver-emulated legacy format

 * fb-helper: Avoid blank consoles from selecting an incorrect color format

 * probe-helper: Enable/disable HPD on connectors plus driver updates

 * Use drm_dbg_ helpers in several places

 * docs: Document defaults for CRTC backgrounds; Document use of drm_minor

Driver Changes:

 * arm/hdlcd: Use new debugfs helpers

 * gud: Use new debugfs helpers

 * panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
   many drivers to common generic DSI write-sequence helper

 * v3d: Do not opencode drm_gem_object_lookup()

 * vc4: Various HVS an CRTC fixes

 * vkms: Fix SEGFAULT from incorrect GEM-buffer mapping

 * Convert various drivers to i2c probe_new()

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g

Replace the deprecated macro with the per-device one.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223112302.320097-1-tvrtko.ursulin@linux.intel.com

The accelerator devices are exposed to user-space using a dedicated
major. In addition, they are represented in /dev with new, dedicated
device char names: /dev/accel/accel*. This is done to make sure any
user-space software that tries to open a graphic card won't open
the accelerator device by mistake.

The above implies that the minor numbering should be separated from
the rest of the DRM devices. However, to avoid code duplication, we
want the drm_minor structure to be able to represent the accelerator
device.

To achieve this, we add a new drm_minor* to drm_device that represents
the accelerator device. This pointer is initialized for drivers that
declare they handle compute accelerator, using a new driver feature
flag called DRIVER_COMPUTE_ACCEL. It is important to note that this
driver feature is mutually exclusive with DRIVER_RENDER. Devices that
want to expose both graphics and compute device char files should be
handled by two drivers that are connected using the auxiliary bus
framework.

In addition, we define a different IDR to handle the accelerators
minors. This is done to make the minor's index be identical to the
device index in /dev/. Any access to the IDR is done solely
by functions in accel_drv.c, as the IDR is define as static. The
DRM core functions call those functions in case they detect the minor's
type is DRM_MINOR_ACCEL.

We define a separate accel_open function (from drm_open) that the
accel drivers should set as their open callback function. Both these
functions eventually call the same drm_open_helper(), which had to be
changed to be non-static so it can be called from accel_drv.c.
accel_open() only partially duplicates drm_open as I removed some code
from it that handles legacy devices.

To help new drivers, I defined DEFINE_DRM_ACCEL_FOPS macro to easily
set the required function operations pointers structure.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>

drm-misc-next for v6.1:

UAPI Changes:

Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.

Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
  ("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
  drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
  takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.

Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
  nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
  Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
  is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
  X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
  dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701  init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
  helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com

This has been only used by the vmwgfx driver and vmwgfx over the last
year removed support for transparent hugepages on vram leaving
drm_get_unmapped_area completely unused.

There's no point in keeping unused code in core drm.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220425203152.1314211-2-zack@kde.org

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done

	# Rename all 'cma_obj's to 'dma_obj'.
	for ff in $(grep -RiHl "cma_obj" $DIRS)
	do
		sed -i -E "s/cma_obj/dma_obj/g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

Now that all callers of ->llseek are going through vfs_llseek(), we
don't gain anything by keeping no_llseek around. Nothing actually calls
it and setting ->llseek to no_lseek is completely equivalent to
leaving it NULL.

Longer term (== by the end of merge window) we want to remove all such
intializations.  To simplify the merge window this commit does *not*
touch initializers - it only defines no_llseek as NULL (and simplifies
the tests on file opening).

At -rc1 we'll need do a mechanical removal of no_llseek -

git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\<no_llseek\>/d' $i
done
would do it.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>