Fixes for v4.18-rc2:
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com

Currently packed pixel modes in MHL2 can't be displayed. The device
automatically recognizes output format, so setting format other than
RGB causes failure. Fix it by writing proper values to registers.

Tested on MHL1 and MHL2 using various vendors' dongles both in
DVI and HDMI mode.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1516706239-9104-1-git-send-email-m.purski@samsung.com

MHL bridge is usually connected to TV via MHL dongle. Currently plugging
HDMI cable to dongle is handled improperly.

Fix it by splitting connecting of a dongle and a HDMI cable. The driver
should now handle unplugging a sink from a dongle and plugging a
different sink with new edid.

Tested on MHL1, MHL2 and MHL3 using various vendors' dongles both in
DVI and HDMI mode.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1516705996-8928-1-git-send-email-m.purski@samsung.com

HSIC initialization was taken from the vendor code. HSIC in MHL circuit
is not connected, so it is not possible to test it. Tests prove that
without HSIC the device works well. Therefore it can be removed.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511968368-30884-1-git-send-email-m.purski@samsung.com

The vendor code waits for infoframe to detect video mode set by source.
We do not need to follow this pattern, because video mode information is
provided by drm core. As a result most of the infoframe handling
code can be removed.

Start transmission immediately after detecting stream on HDMI lines
in irq_scdt() function without waiting for infoframe interrupt.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511956130-24482-1-git-send-email-m.purski@samsung.com

Buffer overflow error should not occur, as mode_fixup() callback
filters pixel clock value and it should never exceed 600000. However,
current implementation is not obviously safe and relies on
implementation of mode_fixup().

Make 'i' variable never reach unsafe value in order to avoid buffer
overflow error.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: bf1722ca ("drm/bridge/sii8620: rewrite hdmi start sequence")
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511341718-6974-1-git-send-email-m.purski@samsung.com

Current implementation of mode_valid() and mode_fixup() callbacks
handle packed pixel modes improperly.

Fix it by using proper maximum clock values from the documentation.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1517568865-25219-1-git-send-email-m.purski@samsung.com

Function should constantly check if cable is connected and finish
in finite time.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Maciej Purski <m.purski@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115173357.31067-4-a.hajda@samsung.com

There is no need to flip reset pin twice. Also delays can be changed to
values present in vendor's code.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Maciej Purski <m.purski@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608060457.18357-1-a.hajda@samsung.com

Pull drm updates from Dave Airlie:
 "This starts to support NVIDIA volta hardware with nouveau, and adds
  amdgpu support for the GPU in the Kabylake-G (the intel + radeon
  single package chip), along with some initial Intel icelake enabling.

  Summary:

  New Drivers:
   - v3d - driver for broadcom V3D V3.x+ hardware
   - xen-front - XEN PV display frontend

  core:
   - handle zpos normalization in the core
   - stop looking at legacy pointers in atomic paths
   - improved scheduler documentation
   - improved aspect ratio validation
   - aspect ratio support for 64:27 and 256:135
   - drop unused control node code.

  i915:
   - Icelake (ICL) enabling
   - GuC/HuC refactoring
   - PSR/PSR2 enabling and fixes
   - DPLL management refactoring
   - DP MST fixes
   - NV12 enabling
   - HDCP improvements
   - GEM/Execlist/reset improvements
   - GVT improvements
   - stolen memory first 4k fix

  amdgpu:
   - Vega 20 support
   - VEGAM support (Kabylake-G)
   - preOS scanout buffer reservation
   - power management gfxoff support for raven
   - SR-IOV fixes
   - Vega10 power profiles and clock voltage control
   - scatter/gather display support on CZ/ST

  amdkfd:
   - GFX9 dGPU support
   - userptr memory mapping

  nouveau:
   - major refactoring for Volta GV100 support

  tda998x:
   - HDMI i2c CEC support

  etnaviv:
   - removed unused logging code
   - license text cleanups
   - MMU handling improvements
   - timeout fence fix for 50 days uptime

  tegra:
   - IOMMU support in gr2d/gr3d drivers
   - zpos support

  vc4:
   - syncobj support
   - CTM, plane alpha and async cursor support

  analogix_dp:
   - HPD and aux chan fixes

  sun4i:
   - MIPI DSI support

  tilcdc:
   - clock divider fixes for OMAP-l138 LCDK board

  rcar-du:
   - R8A77965 support
   - dma-buf fences fixes
   - hardware indexed crtc/du group handling
   - generic zplane property support

  atmel-hclcdc:
   - generic zplane property support

  mediatek:
   - use generic video mode function

  exynos:
   - S5PV210 FIMD variant support
   - IPP v2 framework
   - more HW overlays support"

* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
  drm/amdgpu: fix 32-bit build warning
  drm/exynos: fimc: signedness bug in fimc_setup_clocks()
  drm/exynos: scaler: fix static checker warning
  drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
  drm/amd/display: Remove use of division operator for long longs
  drm/amdgpu: Update GFX info structure to match what vega20 used
  drm/amdgpu/pp: remove duplicate assignment
  drm/sched: add rcu_barrier after entity fini
  drm/amdgpu: move VM BOs on LRU again
  drm/amdgpu: consistenly use VM moved flag
  drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
  drm/amdgpu: further optimize amdgpu_vm_handle_moved
  drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
  drm/amdgpu: rework VM state machine lock handling v2
  drm/amdgpu: Add runtime VCN PG support
  drm/amdgpu: Enable VCN static PG by default on RV
  drm/amdgpu: Add VCN static PG support on RV
  drm/amdgpu: Enable VCN CG by default on RV
  drm/amdgpu: Add static CG control for VCN on RV
  drm/exynos: Fix default value for zpos plane property
  ...