linux.git/drivers/gpu/drm/bridge/Makefile, branch vsnprintf Linux kernel source tree drm/bridge: Add ITE IT6263 LVDS to HDMI converter 2024-11-05T11:26:43+00:00 Liu Ying victor.liu@nxp.com 2024-11-04T03:28:03+00:00 049723628716c7286d6265812567ef1b1ff4827e Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-11-victor.liu@nxp.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
Add basic HDMI video output support. Currently, only RGB888 output
pixel format is supported.  At the LVDS input side, the driver
supports single LVDS link and dual LVDS links with "jeida-24" LVDS
mapping.

Product link:
https://www.ite.com.tw/en/product/cate1/IT6263

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-11-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/bridge: add support for TI TDP158 2024-09-03T12:34:16+00:00 Marc Gonzalez mgonzalez@freebox.fr 2024-08-12T14:51:02+00:00 a15710027afb40c7c1e352902fa5b8c949f021de TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver. It supports DVI 1.0, HDMI 1.4b and 2.0b. It supports 4 TMDS channels, HPD, and a DDC interface. It supports dual power supply rails (1.1V on VDD, 3.3V on VCC) for power reduction. Several methods of power management are implemented to reduce overall power consumption. It supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces. Features - AC-coupled TMDS or DisplayPort dual-mode physical layer input to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps data rate, compatible with HDMI 2.0b electrical parameters - DisplayPort dual-mode standard version 1.1 - Programmable fixed receiver equalizer up to 15.5dB - Global or independent high speed lane control, pre-emphasis and transmit swing, and slew rate control - I2C or pin strap programmable - Configurable as a DisplayPort redriver through I2C - Full lane swap on main lanes - Low power consumption (200 mW at 6Gbps, 8 mW in shutdown) https://www.ti.com/lit/ds/symlink/tdp158.pdf On our board, I2C_EN is pulled high. Thus, this code defines a module_i2c_driver. The default settings work fine for our use-case. So this basic driver doesn't need to tweak any I2C registers. Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240812-tdp158-v5-2-78684a84ec23@freebox.fr 
TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver.
It supports DVI 1.0, HDMI 1.4b and 2.0b.
It supports 4 TMDS channels, HPD, and a DDC interface.
It supports dual power supply rails (1.1V on VDD, 3.3V on VCC)
for power reduction. Several methods of power management are
implemented to reduce overall power consumption.
It supports fixed receiver EQ gain using I2C or pin strap to
compensate for different lengths input cable or board traces.

Features

- AC-coupled TMDS or DisplayPort dual-mode physical layer input
to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps
data rate, compatible with HDMI 2.0b electrical parameters
- DisplayPort dual-mode standard version 1.1
- Programmable fixed receiver equalizer up to 15.5dB
- Global or independent high speed lane control, pre-emphasis
and transmit swing, and slew rate control
- I2C or pin strap programmable
- Configurable as a DisplayPort redriver through I2C
- Full lane swap on main lanes
- Low power consumption (200 mW at 6Gbps, 8 mW in shutdown)

https://www.ti.com/lit/ds/symlink/tdp158.pdf

On our board, I2C_EN is pulled high.
Thus, this code defines a module_i2c_driver.

The default settings work fine for our use-case.
So this basic driver doesn't need to tweak any I2C registers.

Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812-tdp158-v5-2-78684a84ec23@freebox.fr
drm/bridge: add lvds controller support for sam9x7 2024-04-23T07:29:43+00:00 Dharma Balasubiramani dharma.b@microchip.com 2024-04-21T01:10:48+00:00 179b0769fc5fc193d7837bdcb6ddee118a0fa9b8 Add a new LVDS controller driver for sam9x7 which does the following: - Prepares and enables the LVDS Peripheral clock - Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself to the global bridge list. - Identifies its output endpoint as panel and adds it to the encoder display pipeline - Enables the LVDS serializer Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com 
Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240421011050.43265-3-dharma.b@microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240421011050.43265-3-dharma.b@microchip.com
drm/bridge: implement generic DP HPD bridge 2023-12-04T14:07:29+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-12-03T11:43:31+00:00 e560518a6c2e60f1566473c146fddcff3281f617 Several USB-C controllers implement a pretty simple DRM bridge which implements just the HPD notification operations. Add special helper for creating such simple bridges. Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-5-dmitry.baryshkov@linaro.org 
Several USB-C controllers implement a pretty simple DRM bridge which
implements just the HPD notification operations. Add special helper
for creating such simple bridges.

Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-5-dmitry.baryshkov@linaro.org
drm/bridge: add transparent bridge helper 2023-12-04T14:07:29+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-12-03T11:43:28+00:00 2a04739139b2b2761571e18937e2400e71eff664 Define a helper for creating simple transparent bridges which serve the only purpose of linking devices into the bridge chain up to the last bridge representing the connector. This is especially useful for DP/USB-C bridge chains, which can span across several devices, but do not require any additional functionality from the intermediate bridges. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-2-dmitry.baryshkov@linaro.org 
Define a helper for creating simple transparent bridges which serve the
only purpose of linking devices into the bridge chain up to the last
bridge representing the connector. This is especially useful for
DP/USB-C bridge chains, which can span across several devices, but do
not require any additional functionality from the intermediate bridges.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-2-dmitry.baryshkov@linaro.org
drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge 2023-03-28T00:05:41+00:00 Jagan Teki jagan@amarulasolutions.com 2023-03-08T16:39:49+00:00 e7447128ca4a250374d6721ee98e3e3cf99551a6 Samsung MIPI DSIM controller is common DSI IP that can be used in various SoCs like Exynos, i.MX8M Mini/Nano. In order to access this DSI controller between various platform SoCs, the ideal way to incorporate this in the drm stack is via the drm bridge driver. We already have a consolidated code for supporting component and bridge based DRM drivers, so keep the exynos component based code in existing exynos_drm_dsi.c and move generic bridge code as part of samsung-dsim.c Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> 
Samsung MIPI DSIM controller is common DSI IP that can be used in various
SoCs like Exynos, i.MX8M Mini/Nano.

In order to access this DSI controller between various platform SoCs,
the ideal way to incorporate this in the drm stack is via the drm bridge
driver.

We already have a consolidated code for supporting component and bridge
based DRM drivers, so keep the exynos component based code in existing
exynos_drm_dsi.c and move generic bridge code as part of samsung-dsim.c

Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/bridge: cdns-dsi: Move to drm/bridge/cadence 2023-01-17T15:57:34+00:00 Rahul T R r-ravikumar@ti.com 2023-01-03T10:19:49+00:00 87a439e0558aaddeacf49e16729a56da2e3f2c27 Move the cadence dsi bridge under drm/bridge/cadence directory, to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com 
Move the cadence dsi bridge under drm/bridge/cadence directory, to
prepare for adding j721e wrapper support

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com
drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support 2022-06-20T19:15:07+00:00 Liu Ying victor.liu@nxp.com 2022-06-11T14:14:11+00:00 93e163a9e0392aca7d720491100d810bfc3112b0 This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner. The pixel combiner takes two output streams from a single display controller and manipulates the two streams to support a number of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as either one screen, two screens, or virtual screens. The pixel combiner is also responsible for generating some of the control signals for the pixel link output channel. For now, the driver only supports the bypass mode. Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com 
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens.  The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel.  For now, the driver only supports
the bypass mode.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
drm: bridge: Add TI DLPC3433 DSI to DMD bridge 2022-06-03T14:23:31+00:00 Jagan Teki jagan@amarulasolutions.com 2022-06-03T14:03:49+00:00 6352cd451ddbb506ce061868a9e5465d294d4857 TI DLPC3433 is a MIPI DSI based display controller bridge for processing high resolution DMD based projectors. It has a flexible configuration of MIPI DSI and DPI signal input that produces a DMD output in RGB565, RGB666, RGB888 formats. It supports upto 720p resolution with 60 and 120 Hz refresh rates. Add bridge driver for it. Signed-off-by: Christopher Vollo <chris@renewoutreach.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-2-jagan@amarulasolutions.com 
TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.

It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.

It supports upto 720p resolution with 60 and 120 Hz refresh
rates.

Add bridge driver for it.

Signed-off-by: Christopher Vollo <chris@renewoutreach.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-2-jagan@amarulasolutions.com
drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge 2022-05-02T14:44:55+00:00 Marek Vasut marex@denx.de 2022-04-26T19:36:45+00:00 463db5c2ed4aed015323bf0677fdb126e77d01a8 The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Implement a simple bridge driver for this serializer. -- - Add sentinel of_device_table - Add RB from Sam - Rename to fsl-ldb altogether Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org V2: - Rename syscon to fsl,syscon V3: - Consistently use MX8MP V4: - Fix MODULE_DESCRIPTION to also use MX8MP Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de 
The i.MX8MP contains two syscon registers which are responsible
for configuring the on-SoC DPI-to-LVDS serializer. Implement a
simple bridge driver for this serializer.

--
    - Add sentinel of_device_table
    - Add RB from Sam
    - Rename to fsl-ldb altogether

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
V2: - Rename syscon to fsl,syscon
V3: - Consistently use MX8MP
V4: - Fix MODULE_DESCRIPTION to also use MX8MP
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de