linux.git/drivers/gpu/drm/amd/display, branch v6.8-rc2

drm/amd/display: "Enable IPS by default"

2024-01-25T21:00:24+00:00

[Why]
IPS was temporary disabled due to instability.
It was fixed in dmub firmware and with:
- "drm/amd/display: Add IPS checks before dcn register access"
- "drm/amd/display: Disable ips before dc interrupt setting"

[How]
Enable IPS by default.
Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params

Signed-off-by: Roman Li 
Tested-by: Mark Broadworth 
Reviewed-by: Mario Limonciello 
Signed-off-by: Alex Deucher

drm/amd/display: Disable ips before dc interrupt setting

2024-01-25T21:00:24+00:00

[Why]
While in IPS2 an access to dcn registers is not allowed.
If interrupt results in dc call, we should disable IPS.

[How]
Safeguard register access in IPS2 by disabling idle optimization
before calling dc interrupt setting api.

Signed-off-by: Roman Li 
Tested-by: Mark Broadworth 
Reviewed-by: Mario Limonciello 
Signed-off-by: Alex Deucher

drm/amd/display: Replay + IPS + ABM in Full Screen VPB

2024-01-25T21:00:24+00:00

[Why]
Because ABM will wait VStart to start getting histogram data,
 it will cause we can't enter IPS while full screnn video playing.

[How]
Modify the panel refresh rate to the maximun multiple of current
 refresh rate.

Reviewed-by: Dennis Chan 
Acked-by: Roman Li 
Signed-off-by: ChunTao Tso 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Add IPS checks before dcn register access

2024-01-25T21:00:24+00:00

[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.

[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.

Reviewed-by: Nicholas Kazlauskas 
Acked-by: Roman Li 
Signed-off-by: Roman Li 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Add Replay IPS register for DMUB command table

2024-01-25T21:00:24+00:00

- Introduce a new Replay mode for DMUB version 0.0.199.0

Reviewed-by: Martin Leung 
Acked-by: Alex Hung 
Signed-off-by: Alvin Lee 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Allow IPS2 during Replay

2024-01-25T21:00:24+00:00

[Why & How]
Add regkey to block video playback in IPS2 by default

Allow idle optimizations in the same spot we allow Replay for
video playback usecases.

Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.

Reviewed-by: Charlene Liu 
Acked-by: Alex Hung 
Signed-off-by: Nicholas Kazlauskas 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions

2024-01-25T20:34:37+00:00

The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.

Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.

Cc: stable@vger.kernel.org
Cc: Jerry Zuo 
Cc: Jun Lei 
Cc: Wayne Lin 
Cc: Aurabindo Pillai 
Cc: Rodrigo Siqueira 
Cc: Hamza Mahfooz 
Signed-off-by: Srinivasan Shanmugam 
Reviewed-by: Rodrigo Siqueira 
Signed-off-by: Alex Deucher

Merge tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm

2024-01-19T19:50:00+00:00

Pull more drm fixes from Dave Airlie:
 "This is mostly amdgpu and xe fixes, with an amdkfd and nouveau fix
  thrown in.

  The amdgpu ones are just the usual couple of weeks of fixes. The xe
  ones are bunch of cleanups for the new xe driver, the fix you put in
  on the merge commit and the kconfig fix that was hiding the problem
  from me.

  amdgpu:
   - DSC fixes
   - DC resource pool fixes
   - OTG fix
   - DML2 fixes
   - Aux fix
   - GFX10 RLC firmware handling fix
   - Revert a broken workaround for SMU 13.0.2
   - DC writeback fix
   - Enable gfxoff when ROCm apps are active on gfx11 with the proper FW
     version

  amdkfd:
   - Fix dma-buf exports using GEM handles

  nouveau:
   - fix a unneeded WARN_ON triggering

  xe:
   - Fix for definition of wakeref_t
   - Fix for an error code aliasing
   - Fix for VM_UNBIND_ALL in the case there are no bound VMAs
   - Fixes for a number of __iomem address space mismatches reported by
     sparse
   - Fixes for the assignment of exec_queue priority
   - A Fix for skip_guc_pc not taking effect
   - Workaround for a build problem on GCC 11
   - A couple of fixes for error paths
   - Fix a Flat CCS compression metadata copy issue
   - Fix a misplace array bounds checking
   - Don't have display support depend on EXPERT (as discussed on IRC)"

* tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm: (71 commits)
  nouveau/vmm: don't set addr on the fail path to avoid warning
  drm/amdgpu: Enable GFXOFF for Compute on GFX11
  drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for writeback requests.
  drm/amdgpu: revert "Adjust removal control flow for smu v13_0_2"
  drm/amdkfd: init drm_client with funcs hook
  drm/amd/display: Fix a switch statement in populate_dml_output_cfg_from_stream_state()
  drm/amdgpu: Fix the null pointer when load rlc firmware
  drm/amd/display: Align the returned error code with legacy DP
  drm/amd/display: Fix DML2 watermark calculation
  drm/amd/display: Clear OPTC mem select on disable
  drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A
  drm/amd/display: Add logging resource checks
  drm/amd/display: Init link enc resources in dc_state only if res_pool presents
  drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()'
  drm/amd/display: Avoid enum conversion warning
  drm/amd/pm: Fix smuv13.0.6 current clock reporting
  drm/amd/pm: Add error log for smu v13.0.6 reset
  drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()'
  drm/amdgpu: drop exp hw support check for GC 9.4.3
  drm/amdgpu: move debug options init prior to amdgpu device init
  ...

Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-01-19T01:29:01+00:00

Pull i2c updates from Wolfram Sang:
 "This removes the currently unused CLASS_DDC support (controllers set
  the flag, but there is no client to use it).

  Also, CLASS_SPD support gets simplified to prepare removal in the
  future. Class based instantiation is not recommended these days
  anyhow.

  Furthermore, I2C core now creates a debugfs directory per I2C adapter.
  Current bus driver users were converted to use it.

  Finally, quite some driver updates. Standing out are patches for the
  wmt-driver which is refactored to support more variants.

  This is the rebased pull request where a large series for the
  designware driver was dropped"

* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  MAINTAINERS: use proper email for my I2C work
  i2c: stm32f7: add support for stm32mp25 soc
  i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
  dt-bindings: i2c: document st,stm32mp25-i2c compatible
  i2c: stm32f7: simplify status messages in case of errors
  i2c: stm32f7: perform most of irq job in threaded handler
  i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
  i2c: i801: Add lis3lv02d for Dell XPS 15 7590
  i2c: i801: Add lis3lv02d for Dell Precision 3540
  i2c: wmt: Reduce redundant: REG_CR setting
  i2c: wmt: Reduce redundant: function parameter
  i2c: wmt: Reduce redundant: clock mode setting
  i2c: wmt: Reduce redundant: wait event complete
  i2c: wmt: Reduce redundant: bus busy check
  i2c: mux: reg: Remove class-based device auto-detection support
  i2c: make i2c_bus_type const
  dt-bindings: at24: add ROHM BR24G04
  eeprom: at24: use of_match_ptr()
  i2c: cpm: Remove linux,i2c-index conversion from be32
  i2c: imx: Make SDA actually optional for bus recovering
  ...

drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for writeback requests.

2024-01-18T21:44:43+00:00

Return value of 'to_amdgpu_crtc' which is container_of(...) can't be
null, so it's null check 'acrtc' is dropped.

Fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9302 amdgpu_dm_atomic_commit_tail() error: we previously assumed 'acrtc' could be null (see line 9299)

Added 'new_crtc_state' NULL check for function
'drm_atomic_get_new_crtc_state' that retrieves the new state for a CRTC,
while enabling writeback requests.

Cc: stable@vger.kernel.org
Cc: Alex Hung 
Cc: Aurabindo Pillai 
Cc: Rodrigo Siqueira 
Cc: Hamza Mahfooz 
Signed-off-by: Srinivasan Shanmugam 
Reviewed-by: Alex Hung 
Signed-off-by: Alex Deucher