linux.git/drivers/gpu/drm/amd/display, branch v5.9-rc7 Linux kernel source tree drm/amd/display: Don't log hdcp module warnings in dmesg 2020-09-17T04:13:34+00:00 Bhawanpreet Lakha Bhawanpreet.Lakha@amd.com 2020-09-15T21:26:29+00:00 875d369d8f75275d30e59421602d9366426abff7 [Why] DTM topology updates happens by default now. This results in DTM warnings when hdcp is not even being enabled. This spams the dmesg and doesn't effect normal display functionality so it is better to log it using DRM_DEBUG_KMS() [How] Change the DRM_WARN() to DRM_DEBUG_KMS() Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
DTM topology updates happens by default now. This results in DTM
warnings when hdcp is not even being enabled. This spams the dmesg
and doesn't effect normal display functionality so it is better to log it
using DRM_DEBUG_KMS()

[How]
Change the DRM_WARN() to DRM_DEBUG_KMS()

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is 2020-09-15T22:26:58+00:00 Michel Dänzer mdaenzer@redhat.com 2020-09-04T10:43:04+00:00 2f228aab21bbc74e90e267a721215ec8be51daf7 Don't check drm_crtc_state::active for this either, per its documentation in include/drm/drm_crtc.h: * Hence drivers must not consult @active in their various * &drm_mode_config_funcs.atomic_check callback to reject an atomic * commit. atomic_remove_fb disables the CRTC as needed for disabling the primary plane. This prevents at least the following problems if the primary plane gets disabled (e.g. due to destroying the FB assigned to the primary plane, as happens e.g. with mutter in Wayland mode): * The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID (which enables the cursor plane). * If the cursor plane was enabled, changing the legacy DPMS property value from off to on returned EINVAL. v2: * Minor changes to code comment and commit log, per review feedback. GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165 GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344 Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:

 * Hence drivers must not consult @active in their various
 * &drm_mode_config_funcs.atomic_check callback to reject an atomic
 * commit.

atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.

This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):

* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
  (which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
  value from off to on returned EINVAL.

v2:
* Minor changes to code comment and commit log, per review feedback.

GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: update nv1x stutter latencies 2020-09-15T22:24:55+00:00 Jun Lei jun.lei@amd.com 2020-09-03T20:17:46+00:00 c4790a8894232f39c25c7c546c06efe074e63384 [why] Recent characterization shows increased stutter latencies on some SKUs, leading to underflow. [how] Update SOC params to account for this worst case latency. Signed-off-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.

[how]
Update SOC params to account for this worst case latency.

Signed-off-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Don't use DRM_ERROR() for DTM add topology 2020-09-15T22:23:14+00:00 Bhawanpreet Lakha Bhawanpreet.Lakha@amd.com 2020-08-28T15:09:38+00:00 4cdd7b332ed139b1e37faeb82409a14490adb644 [Why] Previously we were only calling add_topology when hdcp was being enabled. Now we call add_topology by default so the ERROR messages are printed if the firmware is not loaded. This error message is not relevant for normal display functionality so no need to print a ERROR message. [How] Change DRM_ERROR to DRM_INFO Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Previously we were only calling add_topology when hdcp was being enabled.
Now we call add_topology by default so the ERROR messages are printed if
the firmware is not loaded.

This error message is not relevant for normal display functionality so
no need to print a ERROR message.

[How]
Change DRM_ERROR to DRM_INFO

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init 2020-08-26T19:45:52+00:00 Dinghao Liu dinghao.liu@zju.edu.cn 2020-08-26T13:24:58+00:00 b67a468a4ccef593cd8df6a02ba3d167b77f0c81 When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Retry AUX write when fail occurs 2020-08-26T19:45:51+00:00 Wayne Lin Wayne.Lin@amd.com 2020-08-18T03:19:42+00:00 ef67d792a2fc578319399f605fbec2f99ecc06ea [Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.

[How]
Check if AUX_WR success. If not, retry it.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Keep current gain when ABM disable immediately 2020-08-26T19:27:52+00:00 Brandon Syu Brandon.Syu@amd.com 2020-06-10T08:44:33+00:00 cba4b52e431e5de3d8012281cfe194f1c39a9052 [Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
When system enters s3/s0i3, backlight PWM would set user level.

[How]
ABM disable function add keep current gain to avoid it.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation 2020-08-26T19:27:51+00:00 Samson Tam Samson.Tam@amd.com 2020-08-13T14:50:21+00:00 efbde23a3b0164cef27fd394e7d548f46af5b51d [Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
dongle_type is set during dongle connection but for passive dongles,
dongle_type is not set. If user starts with an active dongle and
then switches to a passive dongle, it will still report as an active
dongle. Trying to emulate the wrong connecter type results in display
not lighting up.

[How]
Set dpcd_caps.dongle_type for passive dongles in detect_dp().

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Revert HDCP disable sequence change 2020-08-26T19:27:51+00:00 Jaehyun Chung jaehyun.chung@amd.com 2020-08-10T20:02:47+00:00 b61f05622ace5b9498ae279cdfd1c9f0c1ce3f75 [Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Revert HDCP disable sequence change that blanks stream before
disabling HDCP. PSP and HW teams are currently investigating the
root cause of why HDCP cannot be disabled before stream blank,
which is expected to work without issues.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Send DISPLAY_OFF after power down on boot 2020-08-26T19:18:41+00:00 Sung Lee sung.lee@amd.com 2020-08-11T21:23:20+00:00 d2ce14fd99e91f3de667e5dba5b9affa3e40e725 [WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[WHY]
update_clocks might not be called on headless adapters. This means
DISPLAY_OFF may not be sent in headless cases.

[HOW]
If hardware is powered down on boot because it is headless (mode set
does not happen on that adapter) also send DISPLAY_OFF notification.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>