linux.git/drivers/gpu/drm/amd/display, branch v5.18-rc2

drm/amd/display: update dcn315 clock table read

2022-04-06T16:02:57+00:00

[Why & How]
Make dcn315 base its clock table off dcfclk rather than fclk.

This change also adds some sanity checking to make sure an
empty pmfw table does not result in invalid dal clocks.

Reviewed-by: Charlene Liu 
Acked-by: Qingqing Zhuo 
Signed-off-by: Dmytro Laktyushkin 
Signed-off-by: Alex Deucher

drm/amdgpu/display: change pipe policy for DCN 2.1

2022-04-06T16:02:57+00:00

Fixes crash on MST Hub disconnect.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Signed-off-by: Benjamin Marty 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org

drm/amd/display: Add configuration options for AUX wake work around.

2022-04-06T16:02:57+00:00

[Why]
Work around to try to wake unresponsive DP sinks may need to be adjusted
for certain sinks.

[How]
Add options to disable work around or adjust time spent trying to wake
unresponsive DPRX.

Tested-by: Daniel Wheeler 
Reviewed-by: Martin Leung 
Acked-by: Tom Chung 
Signed-off-by: Jimmy Kizito 
Signed-off-by: Alex Deucher

drm/amd/display: remove assert for odm transition case

2022-04-06T16:02:57+00:00

Remove assert that will hit during odm transition case,
since this is a valid case.

Tested-by: Daniel Wheeler 
Reviewed-by: Alvin Lee 
Acked-by: Tom Chung 
Signed-off-by: Eric Bernstein 
Signed-off-by: Alex Deucher

drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw

2022-04-06T16:02:57+00:00

[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.

[  100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
[  100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G        W         5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b
[  100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
[  100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0  42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
[  100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246
[  100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000
[  100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000
[  100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c
[  100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44
[  100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0
[  100.848159] FS:  00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000
[  100.856240] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0
[  100.869106] Call Trace:
[  100.871555]  
[  100.873655]  ? asm_sysvec_reschedule_ipi+0x12/0x20
[  100.878449]  CalculateSwathAndDETConfiguration+0x1a3/0x6dd
[  100.883937]  dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
[  100.890467]  ? kallsyms_lookup_buildid+0xc8/0x163
[  100.895173]  ? kallsyms_lookup_buildid+0xc8/0x163
[  100.899874]  ? __sprint_symbol+0x80/0x135
[  100.903883]  ? dm_update_plane_state+0x3f9/0x4d2
[  100.908500]  ? symbol_string+0xb7/0xde
[  100.912250]  ? number+0x145/0x29b
[  100.915566]  ? vsnprintf+0x341/0x5ff
[  100.919141]  ? desc_read_finalized_seq+0x39/0x87
[  100.923755]  ? update_load_avg+0x1b9/0x607
[  100.927849]  ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
[  100.933416]  ? fetch_pipe_params+0xa4d/0xd0c
[  100.937686]  ? dc_fpu_end+0x3d/0xa8
[  100.941175]  dml_get_voltage_level+0x16b/0x180
[  100.945619]  dcn30_internal_validate_bw+0x10e/0x89b
[  100.950495]  ? dcn31_validate_bandwidth+0x68/0x1fc
[  100.955285]  ? resource_build_scaling_params+0x98b/0xb8c
[  100.960595]  ? dcn31_validate_bandwidth+0x68/0x1fc
[  100.965384]  dcn31_validate_bandwidth+0x9a/0x1fc
[  100.970001]  dc_validate_global_state+0x238/0x295
[  100.974703]  amdgpu_dm_atomic_check+0x9c1/0xbce
[  100.979235]  ? _printk+0x59/0x73
[  100.982467]  drm_atomic_check_only+0x403/0x78b
[  100.986912]  drm_mode_atomic_ioctl+0x49b/0x546
[  100.991358]  ? drm_ioctl+0x1c1/0x3b3
[  100.994936]  ? drm_atomic_set_property+0x92a/0x92a
[  100.999725]  drm_ioctl_kernel+0xdc/0x149
[  101.003648]  drm_ioctl+0x27f/0x3b3
[  101.007051]  ? drm_atomic_set_property+0x92a/0x92a
[  101.011842]  amdgpu_drm_ioctl+0x49/0x7d
[  101.015679]  __se_sys_ioctl+0x7c/0xb8
[  101.015685]  do_syscall_64+0x5f/0xb8
[  101.015690]  ? __irq_exit_rcu+0x34/0x96

[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled.

Signed-off-by: CHANDAN VURDIGERE NATARAJ 
Reviewed-by: Rodrigo Siqueira 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org

amd/display: set backlight only if required

2022-04-06T16:02:57+00:00

[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:

"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"

[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.

Signed-off-by: Shirish S 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org

drm/amd/display: Fix allocate_mst_payload assert on resume

2022-04-06T15:42:32+00:00

[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()

[How]
Use link type as indicator for mst link.

Reviewed-by: Wayne Lin 
Acked-by: Alex Hung 
Signed-off-by: Roman Li 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Revert FEC check in validation

2022-04-06T15:42:32+00:00

why and how:
causes failure on install on certain machines

Reviewed-by: George Shen 
Acked-by: Alex Hung 
Signed-off-by: Martin Leung 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Add work around for AUX failure on wake.

2022-04-06T15:42:32+00:00

[Why]
When waking from low-power states, a DP sink may remain unresponsive to
AUX transactions.

[How]
Try to toggle DPCD SET_POWER register repeatedly (up to a maximum
timeout value) until DP sink becomes responsive.

Reviewed-by: Mustapha Ghaddar 
Acked-by: Alex Hung 
Signed-off-by: Jimmy Kizito 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher

drm/amd/display: Clear optc false state when disable otg

2022-04-06T15:42:32+00:00

[why]
when disable optc, need to clear the underflow status as well.

Reviewed-by: Chris Park 
Acked-by: Alex Hung 
Signed-off-by: Charlene Liu 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher