linux.git/drivers/gpu/drm/amd/display/dc/optc, branch master Linux kernel source tree drm/amd/display: Fix CRC engine 1 enable/disable on DCN3.1.2+ 2026-08-06T16:44:01+00:00 Wayne Lin Wayne.Lin@amd.com 2026-07-23T08:37:02+00:00 c79354d12cb2d12ff0902b38c331f0dff3c21033 [Why] Multi-ROI CRC uses OTG_CRC1_EN for the second engine, but the driver only toggled OTG_CRC_EN and cleared the whole OTG_CRC_CNTL register on disable. [How] Program engine 1 via OTG_CRC1_EN where supported, disable each engine independently by crc_eng_inst, and add the missing mask on relevant DCN ASICs. Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Multi-ROI CRC uses OTG_CRC1_EN for the second engine, but the driver
only toggled OTG_CRC_EN and cleared the whole OTG_CRC_CNTL register on
disable.

[How]
Program engine 1 via OTG_CRC1_EN where supported, disable each
engine independently by crc_eng_inst, and add the missing mask on
relevant DCN ASICs.

Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add missing OTG_CRC1_SELECT mask for DCN3.2 2026-08-06T16:43:49+00:00 Wayne Lin Wayne.Lin@amd.com 2026-07-23T07:03:39+00:00 fdd9ca88783644ac5085285cebe7e8d97886d20d [Why] Configuring CRC engine 1 via optc35_configure_crc() triggers ASSERT(mask != 0) in dc_helper.c when programming OTG_CRC1_SELECT. The DCN3.2 OPTC mask list inherited from dcn32 is missing this field, so ROI[1] CRC cannot be enabled in DisplayCRC mode on DCN3.5/3.51. [How] Add OTG_CRC1_SELECT to OPTC_COMMON_MASK_SH_LIST_DCN3_2, matching the existing dcn10 definition so REG_UPDATE can program CRC engine 1. Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Configuring CRC engine 1 via optc35_configure_crc() triggers
ASSERT(mask != 0) in dc_helper.c when programming OTG_CRC1_SELECT.
The DCN3.2 OPTC mask list inherited from dcn32 is missing this field,
so ROI[1] CRC cannot be enabled in DisplayCRC mode on DCN3.5/3.51.

[How]
Add OTG_CRC1_SELECT to OPTC_COMMON_MASK_SH_LIST_DCN3_2, matching the
existing dcn10 definition so REG_UPDATE can program CRC engine 1.

Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Enable DCN6 sources compilation 2026-08-06T13:53:32+00:00 Aurabindo Pillai aurabindo.pillai@amd.com 2026-07-21T13:59:35+00:00 992694ad28584188725751f695a85661e8e3797a - Add hooks in various entry points to perform hw/sw init for DCN6 asic - Add dependent changes needed to enable DCN6 asic - Update the Makefiles so that DCN6 related newly added sources are compiled Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
- Add hooks in various entry points to perform hw/sw init for DCN6 asic
- Add dependent changes needed to enable DCN6 asic
- Update the Makefiles so that DCN6 related newly added sources are compiled

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add new sources for DCN6 2026-08-06T13:48:29+00:00 Aurabindo Pillai aurabindo.pillai@amd.com 2026-07-22T18:45:53+00:00 7f7d7ea1fa515157162d0d21245925551ed103a1 Add DCN6 code to DC, DML2, and DMUB Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Add DCN6 code to DC, DML2, and DMUB

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Deprecate DMUB register offload functionality 2026-06-17T20:08:41+00:00 Austin Zheng austin.zheng@amd.com 2026-05-12T20:20:54+00:00 0fde96e06f1cd66d9850488095cc65f5dca5b6b2 [Why] The DMUB register offload feature should no longer be used. This was originally a debug feature for DCN21. No longer applicable to the DMUB programming model. [How] Remove DMUB register offload infrastructure including helper functions, structures, debug options, and register sequence macros. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
The DMUB register offload feature should no longer be used.
This was originally a debug feature for DCN21.
No longer applicable to the DMUB programming model.

[How]
Remove DMUB register offload infrastructure including helper
functions, structures, debug options, and register sequence macros.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: add HDMI 2.1 DSC over FRL support 2026-06-03T17:44:59+00:00 Harry Wentland harry.wentland@amd.com 2026-04-23T21:40:22+00:00 547cc004c3c180cbf9da2089ddbde5bc430663eb Add all the bits to enable DSC over FRL. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Add all the bits to enable DSC over FRL.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add DCCG DIO, HPO, OPP, and OPTC support for FRL 2026-06-03T17:44:31+00:00 Harry Wentland harry.wentland@amd.com 2026-04-24T16:17:35+00:00 d36771a03412454a0c7f1c81746426958008a2bb This adds support to HW block programming for the core blocks for HDMI FRL: - DIO - HPO - OPP - OPTC Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
This adds support to HW block programming for the core blocks
for HDMI FRL:
- DIO
- HPO
- OPP
- OPTC

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add DCN42B code to DC 2026-06-03T17:44:02+00:00 Matthew Stewart matthew.stewart2@amd.com 2026-05-18T19:00:50+00:00 0a5e0416e191571de9362b769feb31b3e87a705e [Why & How] Add DCN42B code to DC Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why & How]
Add DCN42B code to DC

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Enable additional wait for pipe pending checks 2026-05-19T15:45:40+00:00 Aric Cyr Aric.Cyr@amd.com 2026-05-05T20:49:47+00:00 e91130c0164fcf569f9d12a2923911e3f1c2c3ec [why] In cases where there are two FULL updates within the same display frame, it's possible for some blocks to be programmed a second time without having been latched completely from the first programming. DCN 3.5 and up already work around this with additional validation checks for frame count and defer as needed via fsleep. [how] Enabled existing pipe checks generically for all DCN versions to avoid HW programming hazards. Also removed redundant max_frame_count which can be determined by the register mask and shift. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
In cases where there are two FULL updates within the same display frame,
it's possible for some blocks to be programmed a second time without having
been latched completely from the first programming.

DCN 3.5 and up already work around this with additional validation checks
for frame count and defer as needed via fsleep.

[how]
Enabled existing pipe checks generically for all DCN versions to avoid HW
programming hazards.

Also removed redundant max_frame_count which can be determined by the
register mask and shift.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix warnings 2026-05-11T20:10:34+00:00 Clay King clayking@amd.com 2026-04-27T18:51:35+00:00 c3fb1fb9e65fa6a108b4d19c61bdcb47fd4fe180 [Why & How] Fix various warnings related to unsigned/signed mismatches - Consistently use the same signedness for a given value - Explcitly cast between types when needed Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why & How]
Fix various warnings related to unsigned/signed mismatches
-  Consistently use the same signedness for a given value
-  Explcitly cast between types when needed

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>