linux.git/drivers/gpu/drm/amd/display/dc/link, branch v6.17 Linux kernel source tree drm/amd/display: Revert Add HPO encoder support to Replay 2025-08-18T21:41:43+00:00 Gabe Teeger gabe.teeger@amd.com 2025-07-09T18:12:22+00:00 0aa86640ebd98d77fb64acef5684e42fba517d2d This reverts commits: commit 1f26214d268b ("drm/amd/display: Add HPO encoder support to Replay") commit 3bfce48b109f ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)") due to visual confirm issue. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb) 
This reverts commits:
commit 1f26214d268b ("drm/amd/display: Add HPO encoder support to Replay")
commit 3bfce48b109f ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)")
due to visual confirm issue.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb)
drm/amd/display: Initial support for SmartMux 2025-07-15T18:07:53+00:00 Aurabindo Pillai aurabindo.pillai@amd.com 2025-05-02T13:51:04+00:00 18f0817d2e9af479a40a1be4d83a849894d6b3f8 SmartMux is a mechanism to switch the GPU being used for scanout in a hybrid configuration. This is used for devices with an eDP and two GPUs. This is only valid when the system has a physical switch (Multiplexer) in the board to switch between the two GPUs. When a graphically intensive workload like a game is being run, the system can be switch the active display to the dGPU, so that we can avoid copying the buffer from dGPU to APU for scanout. This helps with latency and FPS. When power consumption is preferred, the system can be switched to the APU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
SmartMux is a mechanism to switch the GPU being used for scanout in a
hybrid configuration. This is used for devices with an eDP and two GPUs.
This is only valid when the system has a physical switch (Multiplexer)
in the board to switch between the two GPUs.

When a graphically intensive workload like a game is being run, the
system can be switch the active display to the dGPU, so that we can
avoid copying the buffer from dGPU to APU for scanout. This helps with
latency and FPS. When power consumption is preferred, the system can be
switched to the APU.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add HPO encoder support to Replay 2025-07-15T18:07:52+00:00 Ovidiu Bunea Ovidiu.Bunea@amd.com 2025-03-27T20:36:17+00:00 1f26214d268bc2176d9b2374731a6ec4f369030d [why & how] UHBR link rate capable eDPs will use HPO for encoding. Need to pass HPO stream and link encoder instances to DMCUB for Replay FSM to know which instances to use. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why & how]
UHBR link rate capable eDPs will use HPO for encoding. Need to pass
HPO stream and link encoder instances to DMCUB for Replay FSM to
know which instances to use.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix FIXED_VS retimer clock gen source override 2025-07-15T18:07:52+00:00 Michael Strauss michael.strauss@amd.com 2025-02-18T14:23:44+00:00 504f9bdd3a1588604b0452bfe927ff86e5f6e6df [WHY] For SQ128 pattern some vendor-specific overrides are required. Previously a hardcoded clock gen source value was incorrectly programmed, causing our override to retimer's clock source override to be ignored. Due to some PHY issues on certain APU programs, we see failures on retimer bypass ports extend to electrical testing downstream of PHY due to some host clock jitter which the retimer follows. [HOW] Fix typo to use correct clock gen source override of 0xC4 rather than 0x4C. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[WHY]
For SQ128 pattern some vendor-specific overrides are required.
Previously a hardcoded clock gen source value was incorrectly programmed,
causing our override to retimer's clock source override to be ignored.
Due to some PHY issues on certain APU programs, we see failures on retimer
bypass ports extend to electrical testing downstream of PHY due to some host
clock jitter which the retimer follows.

[HOW]
Fix typo to use correct clock gen source override of 0xC4 rather than 0x4C.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix Link Override Sequencing When Switching Between DIO/HPO 2025-06-30T15:59:22+00:00 Michael Strauss michael.strauss@amd.com 2025-02-12T18:52:42+00:00 9c6669c2e21a2d9b3f3857883c715a302ae64ac0 [WHY] When performing certain link maintenance compliance tests or forcing link settings, changing between 128b/132b and 8b/10b rates no longer works on some ASICs. Some rate divider updates only occur when we set timings or validate state, which is not performed currently when toggling DPMS to change rates. [HOW] Re-calculate dividers and reprogram audio when switching between DIO and HPO through DP compliance/escape code path. Add OTG disable/re-enable so we don't touch the clock while OTG is active. Acquire dcLock before forcing link settings to avoid thread synchronization errors due to added programming in escape code path and potential HPD interrupts. Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[WHY]
When performing certain link maintenance compliance tests or forcing link
settings, changing between 128b/132b and 8b/10b rates no longer works on
some ASICs. Some rate divider updates only occur when we set
timings or validate state, which is not performed currently when toggling
DPMS to change rates.

[HOW]
Re-calculate dividers and reprogram audio when switching between DIO
and HPO through DP compliance/escape code path.
Add OTG disable/re-enable so we don't touch the clock while OTG is active.
Acquire dcLock before forcing link settings to avoid thread synchronization
errors due to added programming in escape code path and potential HPD
interrupts.

Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Remove unused tunnel BW validation 2025-06-30T15:58:36+00:00 Cruise Hung Cruise.Hung@amd.com 2025-06-13T09:41:50+00:00 156374b2a6ce56ac744c75ce26649d421e48311d [Why & How] The tunnel BW validation code has changed to the new one. Remove the unused code. The DP tunneling overhead is not updated in SST. Move updating DP tunneling overhead for both SST and MST. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why & How]
The tunnel BW validation code has changed to the new one.
Remove the unused code.
The DP tunneling overhead is not updated in SST.
Move updating DP tunneling overhead for both SST and MST.

Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add num_slices_h to set_dto_dscclk signature 2025-06-24T13:58:17+00:00 Ilya Bakoulin Ilya.Bakoulin@amd.com 2025-06-05T15:48:23+00:00 c233ec1902430f7791d1e0deff6b480b084b2f0e Add the number of horizontal slices argument to allow configuring clock based on slice number. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Add the number of horizontal slices argument to allow configuring clock
based on slice number.

Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add new DP tunnel bandwidth validation 2025-06-24T13:55:35+00:00 Cruise Hung Cruise.Hung@amd.com 2025-06-03T06:30:59+00:00 7beee6e91c20f297d2eba90397fe44938138f3b8 [Why & How] Add new function for DP tunnel bandwidth validation. It uses the estimated BW and allocated BW to validate the timings. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why & How]
Add new function for DP tunnel bandwidth validation.
It uses the estimated BW and allocated BW to validate the timings.

Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: DML2.1 changes 2025-06-18T16:19:17+00:00 Aurabindo Pillai aurabindo.pillai@amd.com 2025-05-20T20:58:30+00:00 708d45eb1aa34634df04fa39a2c15d8a062ac070 * Add a missing compilation unit * Missing CFLAGS for certain units Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
* Add a missing compilation unit
* Missing CFLAGS for certain units

Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Get LTTPR IEEE OUI/Device ID From Closest LTTPR To Host 2025-06-18T16:19:16+00:00 Michael Strauss michael.strauss@amd.com 2025-02-26T15:03:48+00:00 791897f5c77a2a65d0e500be4743af2ddf6eb061 [WHY] These fields are read for the explicit purpose of detecting embedded LTTPRs (i.e. between host ASIC and the user-facing port), and thus need to calculate the correct DPCD address offset based on LTTPR count to target the appropriate LTTPR's DPCD register space with these queries. [HOW] Cascaded LTTPRs in a link each snoop and increment LTTPR count when queried via DPCD read, so an LTTPR embedded in a source device (e.g. USB4 port on a laptop) will always be addressible using the max LTTPR count seen by the host. Therefore we simply need to use a recently added helper function to calculate the correct DPCD address to target potentially embedded LTTPRs based on the received LTTPR count. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[WHY]
These fields are read for the explicit purpose of detecting embedded LTTPRs
(i.e. between host ASIC and the user-facing port), and thus need to
calculate the correct DPCD address offset based on LTTPR count to target
the appropriate LTTPR's DPCD register space with these queries.

[HOW]
Cascaded LTTPRs in a link each snoop and increment LTTPR count when queried
via DPCD read, so an LTTPR embedded in a source device (e.g. USB4 port on a
laptop) will always be addressible using the max LTTPR count seen by the
host. Therefore we simply need to use a recently added helper function to
calculate the correct DPCD address to target potentially embedded LTTPRs
based on the received LTTPR count.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>