linux.git/drivers/gpu/drm/amd/display/dc/dio, branch v6.12 Linux kernel source tree drm/amd/display: Add seamless boot support for more DIG operation modes 2024-07-27T21:34:07+00:00 Nicholas Kazlauskas nicholas.kazlauskas@amd.com 2024-07-16T21:41:54+00:00 bd870cfd21489d28195fda157710ebd4cecaa8ca [Why] When pre-OS firmware enables display support for displays that operate the DIG in 2 pixels per cycle processing modes the inferred pixel rate from get_pixel_clk_frequency_100hz does not account for the true pixel rate since we're outputting 2 per cycle past the stream encoder. This causes seamless boot validation to abort early. [How] Add a new stream encoder function for getting pixels per cycle from the stream encoder. If the pixels per cycle is greater than 1 and the driver policy is to enable 2 pixels per cycle for post-OS then allow seamless boot to continue. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
When pre-OS firmware enables display support for displays that operate
the DIG in 2 pixels per cycle processing modes the inferred pixel rate
from get_pixel_clk_frequency_100hz does not account for the true pixel
rate since we're outputting 2 per cycle past the stream encoder.

This causes seamless boot validation to abort early.

[How]
Add a new stream encoder function for getting pixels per cycle from the
stream encoder. If the pixels per cycle is greater than 1 and the driver
policy is to enable 2 pixels per cycle for post-OS then allow seamless
boot to continue.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Refactor for dio 2024-07-27T21:31:26+00:00 Bhuvanachandra Pinninti bpinnint@amd.com 2024-07-16T13:23:03+00:00 680caca6feee720d0a6cb00f892c0d2d46dc4075 Moved files to respective folders to improve DIO code. Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Moved files to respective folders to improve DIO code.

Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: avoid disable otg when dig was disabled 2024-07-23T21:07:10+00:00 Jingwen Zhu jingwen.zhu@amd.com 2024-06-25T08:20:58+00:00 218784049f4b90834dd7b854857df0b7e0f76567 [Why] This is a workaround for an dcn3.1 hang that happens if otg dispclk is ramped while otg is on and stream enc is off. But this w/a should not trigger when we have a dig active. [How] Avoid disable otg when dig FE/BE FIFO was not switched. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
This is a workaround for an dcn3.1 hang that happens if otg dispclk
is ramped while otg is on and stream enc is off.
But this w/a should not trigger when we have a dig active.

[How]
Avoid disable otg when dig FE/BE FIFO was not switched.

Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Move dio files into dio folder 2024-07-01T20:10:35+00:00 Bhuvanachandra Pinninti bpinnint@amd.com 2024-06-20T12:24:23+00:00 d19deabe5a4566851f6ecade5ebd2e63c3248cf2 [why] Refactor the code of dio to unit test. [how] Moved files to respective folders and changed cMakeLists and makefiles. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
Refactor the code of dio to unit test.

[how]
Moved files to respective folders and changed cMakeLists and makefiles.

Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Refactor DCN3X into component folder 2024-06-14T20:18:55+00:00 Mounika Adhuri moadhuri@amd.com 2024-06-05T10:38:24+00:00 2d62bb450ed1846ffdaff7072347e40fb4908cb2 [why] Move DCN3X files to unique component folder. [how] Create respective component folder in dc, move the DCN3X files into corresponding new folders and made appropriate changes for compilation in Makefiles. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
Move DCN3X files to unique component folder.

[how]
Create respective component folder in dc, move the DCN3X files into
corresponding new folders and made appropriate changes for compilation
in Makefiles.

Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>