linux.git/drivers/gpu/drm/amd/display/dc/dccg, branch for-next Linux kernel source tree drm/amd/display: Remove PIPE_DTO_SRC_SEL programming from set_dtbclk_dto 2024-11-20T14:41:22+00:00 Ovidiu Bunea Ovidiu.Bunea@amd.com 2024-11-06T21:25:18+00:00 a3e6079bd93d5c66a43bf6a5f90e5b98465dc7b3 There are cases where an OTG is remapped from driving a regular HDMI display to a DP/eDP display. There are also cases where DTBCLK needs to be enabled for HPO, but DTBCLK DTO programming may be done while OTG is still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may change the pixel clock generator source for a mapped and running OTG and cause it to hang. Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is already done in program_pixel_clk(). Additionally, make sure that program_pixel_clk sets DTBCLK DTO as source for special HDMI cases. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
There are cases where an OTG is remapped from driving a regular HDMI
display to a DP/eDP display. There are also cases where DTBCLK needs to
be enabled for HPO, but DTBCLK DTO programming may be done while OTG is
still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may
change the pixel clock generator source for a mapped and running OTG and
cause it to hang.

Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is
already done in program_pixel_clk(). Additionally, make sure that
program_pixel_clk sets DTBCLK DTO as source for special HDMI cases.

Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Configure DTBCLK_P with OPTC only for dcn401 2024-10-01T21:38:17+00:00 Dillon Varone dillon.varone@amd.com 2024-09-20T20:56:20+00:00 3c6c8d1a1e3f033f1abf84d6d54c268c35b0fcdd [WHY] DTBCLK_P is used to generate virtual pixel clock, and to drive the HPO stream encoder clock. Programming the required clock when enabling/disabling both components can cause issues. For example, if HPO is being disabled and clock source is changed to REFCLK, virtual pixel rate will then be wrong, causing issues in CRTC. [HOW] Only program the DTBCLK_P when programming CRTC, as its expected it will be enabled prior to HPO, and disabled after HPO in all valid cases. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[WHY]
DTBCLK_P is used to generate virtual pixel clock, and to drive the HPO
stream encoder clock. Programming the required clock when
enabling/disabling both components can cause issues.
For example, if HPO is being disabled and clock source is changed to
REFCLK, virtual pixel rate will then be wrong, causing issues in CRTC.

[HOW]
Only program the DTBCLK_P when programming CRTC, as its expected it will
be enabled prior to HPO, and disabled after HPO in all valid cases.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS 2024-10-01T21:36:31+00:00 Ryan Seto ryanseto@amd.com 2024-09-13T20:01:47+00:00 9b68445eb657d02d8af3ee842335d33259d1c7e7 [Why] If two monitors with TMDS signals were timing synced and one was disconnected, the stream would go out of sync too early due to the PLL turning off and the system could hang [How] On link disable output, change PHY FSM transition from TX_EN-to-PHY_OFF to TX_EN-to-PLL_ON for TMDS Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
If two monitors with TMDS signals were timing synced and one was
disconnected, the stream would go out of sync too early due to
the PLL turning off and the system could hang

[How]
On link disable output, change PHY FSM transition from TX_EN-to-PHY_OFF
to TX_EN-to-PLL_ON for TMDS

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: fix dccg root clock optimization related hang 2024-09-06T21:41:07+00:00 Qili Lu qili.lu@amd.com 2024-08-21T20:26:13+00:00 f5a972dfe3e993f09cf12bd36389a942ecd23350 [Why] enable dpp rcg before we disable dppclk in hw_init cause system hang/reboot [How] we remove dccg rcg related code from init into a separate function and call it after we init pipe Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Qili Lu <qili.lu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot

[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Refactor dccg35_get_other_enabled_symclk_fe 2024-09-06T21:40:55+00:00 Nicholas Susanto Nicholas.Susanto@amd.com 2024-08-20T19:10:45+00:00 5359d5bc975466e8791d7f870ea4a96f1b0973bf [Why] Function used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up. [How] Refactor the function to correctly return the number of FEs connected to the input BE. Also, rename it for clarity. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]

Function used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if
all FEs were disconnected. However, the function would skip over the
primary FE and return 0 when the primary FE was still connected. This
caused black screens on driver disable with an MST daisy chain hooked
up.

[How]

Refactor the function to correctly return the number of FEs connected
to the input BE. Also, rename it for clarity.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix flickering caused by dccg 2024-09-02T15:39:53+00:00 Hansen Dsouza Hansen.Dsouza@amd.com 2024-08-14T15:20:08+00:00 9888773753333ee7bed1697abd6fd9c84239cc4a Always allow un-gating. Follow legacy workaround for repeated dppclk dto updates Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Always allow un-gating. Follow legacy workaround for repeated
dppclk dto updates

Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: guard write a 0 post_divider value to HW 2024-08-27T21:51:53+00:00 Ahmed, Muhammad Ahmed.Ahmed@amd.com 2024-08-13T21:11:55+00:00 5d666496c24129edeb2bcb500498b87cc64e7f07 [why] post_divider_value should not be 0. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ahmed, Muhammad <Ahmed.Ahmed@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
post_divider_value should not be 0.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ahmed, Muhammad <Ahmed.Ahmed@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert "drm/amd/display: Update to using new dccg callbacks" 2024-08-21T02:14:13+00:00 Hansen Dsouza Hansen.Dsouza@amd.com 2024-08-15T22:45:13+00:00 18ac82c26da45d033df7eb993139da83dd53ee68 [Why] Revert updated DCCG wrappers due to regression [How] This reverts commit 680458d41aa46a009909482f58358205b5c4b438. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Revert updated DCCG wrappers due to regression

[How]
This reverts commit 680458d41aa46a009909482f58358205b5c4b438.

Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Update to using new dccg callbacks 2024-08-13T14:32:29+00:00 Hansen Dsouza Hansen.Dsouza@amd.com 2024-07-30T20:32:44+00:00 680458d41aa46a009909482f58358205b5c4b438 [Why and how] Update to using new dccg callbacks Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why and how]
Update to using new dccg callbacks

Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add clock control callbacks 2024-08-06T15:11:03+00:00 Hansen Dsouza Hansen.Dsouza@amd.com 2024-07-26T04:24:55+00:00 00f06855f6e68954f67616cd5560fca25c755eba [why & how] Add clock source selection control functions based on spec Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why & how]
Add clock source selection control functions based on spec

Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>