This is an ugly one unfortunately. Currently, all DRM drivers supporting
atomic modesetting will save the state that userspace had set before
suspending, then attempt to restore that state on resume. This probably
worked very well at one point, like many other things, until DP MST came
into the picture. While it's easy to restore state on normal display
connectors that were disconnected during suspend regardless of their
state post-resume, this can't really be done with MST because of the
fact that setting up a downstream sink requires performing sideband
transactions between the source and the MST hub, sending out the ACT
packets, etc.

Because of this, there isn't really a guarantee that we can restore the
atomic state we had before suspend once we've resumed. This sucks pretty
bad, but so far I haven't run into any compositors that this actually
causes serious issues with. Most compositors will notice the hotplug we
send afterwards, and then reprobe state.

Since nouveau and i915 also don't fail the suspend/resume process due to
failing to restore the atomic state, let's make amdgpu match this
behavior. Better to resume the GPU properly, then to stop the process
half way because of a potentially unavoidable atomic commit failure.

Eventually, we'll have a real fix for this problem on the DRM level. But
we've got some more important low-hanging fruit to deal with first.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com

drm_dp_mst_topology_mgr_resume() returns whether or not it managed to
find the topology in question after a suspend resume cycle, and the
driver is supposed to check this value and disable MST accordingly if
it's gone-in addition to sending a hotplug in order to notify userspace
that something changed during suspend.

Currently, amdgpu just makes the mistake of ignoring the return code
from drm_dp_mst_topology_mgr_resume() which means that if a topology was
removed in suspend, amdgpu never notices and assumes it's still
connected which leads to all sorts of problems.

So, fix this by actually checking the rc from
drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the
function while we're at it to fix the over-indenting.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com

Pull drm fixes from Dave Airlie:
 "Happy New Year, just decloaking from leave to get some stuff from the
  last week in before rc1:

  core:
   - two regression fixes for damage blob and atomic

  i915 gvt:
   - Some missed GVT fixes from the original pull

  amdgpu:
   - new PCI IDs
   - SR-IOV fixes
   - DC fixes
   - Vega20 fixes"

* tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits)
  drm: Put damage blob when destroy plane state
  drm: fix null pointer dereference on null state pointer
  drm/amdgpu: Add new VegaM pci id
  drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output
  drm/amdgpu: add Vega20 PSP ASD firmware loading
  drm/amd/display: Fix MST dp_blank REG_WAIT timeout
  drm/amd/display: validate extended dongle caps
  drm/amd/display: Use div_u64 for flip timestamp ns to ms
  drm/amdgpu/uvd:Change uvd ring name convention
  drm/amd/powerplay: add Vega20 LCLK DPM level setting support
  drm/amdgpu: print process info when job timeout
  drm/amdgpu/nbio7.4: add hw bug workaround for vega20
  drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12
  drm/amd/display: Optimize passive update planes.
  drm/amd/display: verify lane status before exiting verify link cap
  drm/amd/display: Fix bug with not updating VSP infoframe
  drm/amd/display: Add retry to read ddc_clock pin
  drm/amd/display: Don't skip link training for empty dongle
  drm/amd/display: Wait edp HPD to high in detect_sink
  drm/amd/display: fix surface update sequence
  ...

Pull drm updates from Dave Airlie:
 "Core:
   - shared fencing staging removal
   - drop transactional atomic helpers and move helpers to new location
   - DP/MST atomic cleanup
   - Leasing cleanups and drop EXPORT_SYMBOL
   - Convert drivers to atomic helpers and generic fbdev.
   - removed deprecated obj_ref/unref in favour of get/put
   - Improve dumb callback documentation
   - MODESET_LOCK_BEGIN/END helpers

  panels:
   - CDTech panels, Banana Pi Panel, DLC1010GIG,
   - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
   - Himax HX8357D, simulated RTSM AEMv8.
   - GPD Win2 panel
   - AUO G101EVN010

  vgem:
   - render node support

  ttm:
   - move global init out of drivers
   - fix LRU handling for ghost objects
   - Support for simultaneous submissions to multiple engines

  scheduler:
   - timeout/fault handling changes to help GPU recovery
   - helpers for hw with preemption support

  i915:
   - Scaler/Watermark fixes
   - DP MST + powerwell fixes
   - PSR fixes
   - Break long get/put shmemfs pages
   - Icelake fixes
   - Icelake DSI video mode enablement
   - Engine workaround improvements

  amdgpu:
   - freesync support
   - GPU reset enabled on CI, VI, SOC15 dGPUs
   - ABM support in DC
   - KFD support for vega12/polaris12
   - SDMA paging queue on vega
   - More amdkfd code sharing
   - DCC scanout on GFX9
   - DC kerneldoc
   - Updated SMU firmware for GFX8 chips
   - XGMI PSP + hive reset support
   - GPU reset
   - DC trace support
   - Powerplay updates for newer Polaris
   - Cursor plane update fast path
   - kfd dma-buf support

  virtio-gpu:
   - add EDID support

  vmwgfx:
   - pageflip with damage support

  nouveau:
   - Initial Turing TU104/TU106 modesetting support

  msm:
   - a2xx gpu support for apq8060 and imx5
   - a2xx gpummu support
   - mdp4 display support for apq8060
   - DPU fixes and cleanups
   - enhanced profiling support
   - debug object naming interface
   - get_iova/page pinning decoupling

  tegra:
   - Tegra194 host1x, VIC and display support enabled
   - Audio over HDMI for Tegra186 and Tegra194

  exynos:
   - DMA/IOMMU refactoring
   - plane alpha + blend mode support
   - Color format fixes for mixer driver

  rcar-du:
   - R8A7744 and R8A77470 support
   - R8A77965 LVDS support

  imx:
   - fbdev emulation fix
   - multi-tiled scalling fixes
   - SPDX identifiers

  rockchip
   - dw_hdmi support
   - dw-mipi-dsi + dual dsi support
   - mailbox read size fix

  qxl:
   - fix cursor pinning

  vc4:
   - YUV support (scaling + cursor)

  v3d:
   - enable TFU (Texture Formatting Unit)

  mali-dp:
   - add support for linear tiled formats

  sun4i:
   - Display Engine 3 support
   - H6 DE3 mixer 0 support
   - H6 display engine support
   - dw-hdmi support
   - H6 HDMI phy support
   - implicit fence waiting
   - BGRX8888 support

  meson:
   - Overlay plane support
   - implicit fence waiting
   - HDMI 1.4 4k modes

  bridge:
   - i2c fixes for sii902x"

* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
  drm/amd/display: Add fast path for cursor plane updates
  drm/amdgpu: Enable GPU recovery by default for CI
  drm/amd/display: Fix duplicating scaling/underscan connector state
  drm/amd/display: Fix unintialized max_bpc state values
  Revert "drm/amd/display: Set RMX_ASPECT as default"
  drm/amdgpu: Fix stub function name
  drm/msm/dpu: Fix clock issue after bind failure
  drm/msm/dpu: Clean up dpu_media_info.h static inline functions
  drm/msm/dpu: Further cleanups for static inline functions
  drm/msm/dpu: Cleanup the debugfs functions
  drm/msm/dpu: Remove dpu_irq and unused functions
  drm/msm: Make irq_postinstall optional
  drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
  drm/msm/dpu: Remove unused functions
  drm/msm/dpu: Remove dpu_crtc_is_enabled()
  drm/msm/dpu: Remove dpu_crtc_get_mixer_height
  drm/msm/dpu: Remove dpu_dbg
  drm/msm: dpu: Remove crtc_lock
  drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
  drm/msm: dpu: Separate crtc assignment from vblank enable
  ...

Resolves __udivdi3 missing errors when building for i386.

Fixes: 6378ef012ddc ("drm/amd/display: Add below the range support for FreeSync")

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
When the flip-rate is below the minimum supported variable refresh rate
range for the monitor the front porch wait will timeout and be
frequently misaligned resulting in stuttering and/or flickering.

The FreeSync module can still maintain a smooth and flicker free
image when the monitor has a refresh rate range such that the maximum
refresh > 2 * minimum refresh by utilizing low framerate compensation,
"below the range".

[How]
Hook up the pre-flip and post-flip handlers from the FreeSync module.
These adjust the minimum/maximum vrr range to duplicate frames
when appropriate by tracking flip timestamps.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The behavior of drm_atomic_helper_cleanup_planes differs depending on
whether the commit was asynchronous or not. When it's called from
amdgpu_dm_atomic_commit_tail during a typical atomic commit the
plane state has been swapped so it calls cleanup_fb on the old plane
state.

However, in the asynchronous commit codepath the call to
drm_atomic_helper_commit also calls dm_plane_helper_cleanup_fb after
atomic_async_update has been called. Since the plane state is updated
in place and has not been swapped the cleanup_fb call affects the new
plane state.

This results in a use after free for the given sequence:

- Fast update, fb1 pin/ref, fb1 unpin/unref
- Fast update, fb2 pin/ref, fb2 unpin/unref
- Slow update, fb1 pin/ref, fb2 unpin/unref
- Fast update, fb2 pin/ref -> use after free. bug

[How]
Disallow framebuffer changes in the fast path. Since this includes
a NULL framebuffer, this means that only framebuffers that have
been previously pin+ref at least once will be used, preventing a
use after free.

This has a significant throughput reduction for cursor updates where
the framebuffer changes. For most desktop usage this isn't a problem,
but it does introduce performance regressions for two specific IGT
tests:

- cursor-vs-flip-toggle
- cursor-vs-flip-varying-size

Fixes: 2cc751931afc ("drm/amd/display: Add fast path for cursor plane updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Legacy cursor plane updates from drm helpers go through the full
atomic codepath. A high volume of cursor updates through this slow
code path can cause subsequent page-flips to skip vblank intervals
since each individual update is slow.

This problem is particularly noticeable for the compton compositor.

[How]
A fast path for cursor plane updates is added by using DRM asynchronous
commit support provided by async_check and async_update. These don't do
a full state/flip_done dependency stall and they don't block other
commit work.

However, DC still expects itself to be single-threaded for anything
that can issue register writes. Screen corruption or hangs can occur
if write sequences overlap. Every call that potentially perform
register writes needs to be guarded for asynchronous updates to work.
The dc_lock mutex was added for this.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106175

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
These properties aren't being carried over when the atomic state.
This tricks atomic check and commit tail into performing underscan
and scaling operations when they aren't needed.

With the patch that forced scaling/RMX_ASPECT on by default this
results in many unnecessary surface updates and hangs under certain
conditions.

[How]
Duplicate the properties.

Fixes: 91b66c47ba34 ("drm/amd/display: Set RMX_ASPECT as default")

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.

Banding occurs for these displays.

[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.

Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>