linux.git/drivers/gpu/drm/amd/display/amdgpu_dm, branch v4.20-rc2

drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()

2018-11-07T23:21:05+00:00

[why]
Removing connector reusage from DM to match the rest of the tree ended
up revealing an issue that was surprisingly subtle. The original amdgpu
code for DC that was submitted appears to have left a chunk in
dm_dp_create_fake_mst_encoder() that tries to find a "master encoder",
the likes of which isn't actually used or stored anywhere. It does so at
the wrong time as well by trying to access parts of the drm_connector
from the encoder init before it's actually been initialized. This
results in a NULL pointer deref on MST hotplugs:

[  160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[  160.697234] PGD 0 P4D 0
[  160.697814] Oops: 0010 [#1] SMP PTI
[  160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G           O      4.19.0Lyude-Test+ #2
[  160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018
[  160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[  160.700322] RIP: 0010:          (null)
[  160.700920] Code: Bad RIP value.
[  160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206
[  160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158
[  160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000
[  160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25
[  160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000
[  160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000
[  160.705260] FS:  0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000
[  160.705854] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0
[  160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  160.708372] Call Trace:
[  160.708998]  ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu]
[  160.709625]  ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper]
[  160.710284]  ? wake_up_q+0x54/0x70
[  160.710877]  ? __mutex_unlock_slowpath.isra.18+0xb3/0x110
[  160.711512]  ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper]
[  160.712161]  ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
[  160.712762]  ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper]
[  160.713408]  ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper]
[  160.714013]  ? process_one_work+0x1a1/0x3a0
[  160.714667]  ? worker_thread+0x30/0x380
[  160.715326]  ? wq_update_unbound_numa+0x10/0x10
[  160.715939]  ? kthread+0x112/0x130
[  160.716591]  ? kthread_create_worker_on_cpu+0x70/0x70
[  160.717262]  ? ret_from_fork+0x35/0x40
[  160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu]
[  160.720141] CR2: 0000000000000000

Somehow the connector reusage DM was using for MST connectors managed to
paper over this issue entirely; hence why this was never caught until
now.

[how]
Since this code isn't used anywhere and seems useless anyway, we can
just drop it entirely. This appears to fix the issue on my HP ZBook with
an AMD WX4150.

Signed-off-by: Lyude Paul 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher

drm/amd/display: Drop reusing drm connector for MST

2018-11-07T23:20:56+00:00

[why]
It is not safe to keep existing connector while entire topology
has been removed. Could lead potential impact to uapi.
Entirely unregister all the connectors on the topology,
and use a new set of connectors when the topology is plugged back
on.

[How]
Remove the drm connector entirely each time when the
corresponding MST topology is gone.
When hotunplug a connector (e.g., DP2)
1. Remove connector from userspace.
2. Drop it's reference.
When hotplug back on:
1. Detect new topology, and create new connectors.
2. Notify userspace with sysfs hotplug event.
3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2)
to new (e.g., DP3) connector.

Signed-off-by: Jerry (Fangzhi) Zuo 
Reviewed-by: Harry Wentland 
Reviewed-by: Lyude Paul 
Signed-off-by: Alex Deucher

drm/amd/display: Cleanup MST non-atomic code workaround

2018-11-07T23:20:49+00:00

[why]
It is not correct to touch aconnector within atomic_check.

[How]
It was added as workaround before, and no longer needed.

Signed-off-by: Jerry (Fangzhi) Zuo 
Reviewed-by: Harry Wentland 
Reviewed-by: Lyude Paul 
Signed-off-by: Alex Deucher

drm/amdgpu/display/dm: handle FBC dc feature parameter

2018-11-06T21:45:56+00:00

Set the dc_config properly when the option is enabled.

Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher

drm/amd/display: Stop leaking planes

2018-11-06T21:25:28+00:00

[Why]
drm_plane_cleanup does not free the plane.

[How]
Call drm_primary_helper_destroy which will also free the plane.

Signed-off-by: Harry Wentland 
Acked-by: Alex Deucher 
Signed-off-by: Alex Deucher

Revert "drm/amd/display: set backlight level limit to 1"

2018-11-06T21:23:58+00:00

This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f.

This breaks some apps that assume 0 is minimum brightness.

Revert for 4.20.  This is fixed properly for drm-next/4.21 in:
"drm/amd: Don't fail on backlight = 0"
However, that patch depends on more extensive changes to the
backlight interface which are too invasive for -fixes.

Fixes: Bugzilla: https://bugs.freedesktop.org/108668
Signed-off-by: Alex Deucher

drm/amd/display: set backlight level limit to 1

2018-10-30T21:53:02+00:00

This patch will work as workaround for silicon limitation
related to PWM dutycycle when the backlight level goes to 0.

Actually PWM value is 16 bit value and valid range from 1-65535.
when ever user requested to set this PWM value to 0 which is not
fall in the range, in VBIOS taken care this by limiting to 1.
This patch here will do the same. Either driver or VBIOS can not
pass 0 value as it is not a valid range for PWM and it will
give a high PWM pulse which is not the intended behaviour as
per HW constraints.

Signed-off-by: suresh guttula 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher

drm/amd/display: Fix Null point error if smu ip was disabled

2018-10-25T01:03:43+00:00

from AI, SMU Ip is not indispensable to driver and can be
disabled by user via module parameter ip_block_mask.
so the pp_handle may be NULL.

Reviewed-by: Alex Deucher 
Signed-off-by: Rex Zhu 
Signed-off-by: Alex Deucher

drm/amdgpu/display: dm/amdgpu: make dp phy debugfs for eDP

2018-10-12T17:53:04+00:00

[WHY] dp debugfs file does not exist for eDP under
      /sys/kernel/debug/dri/0/eDP-1. the root is phy debugfs
      is created for dp connector only.
[HOW] for eDP connector, create phy debugfs too.

Signed-off-by: Hersen Wu 
Reviewed-by: David Francis 
Acked-by: Leo Li 
Signed-off-by: Alex Deucher

drm/amd/display: Signal hw_done() after waiting for flip_done()

2018-10-09T22:04:29+00:00

In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().

[Why]

This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.

Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):

**THREAD 1**                        | **THREAD 2**
                                    |
Initialize atomic state for flip    |
                                    |
Queue worker                        |
                                   ...

                                    | Do work for flip
                                    |
                                    | Signal hw_done() on CRTC 1
                                    | Signal hw_done() on CRTC 2
                                    |
                                    | Wait for flip_done() on CRTC 1

                                <---- **PREEMPTED BY THREAD 1**

Initialize atomic state for cursor  |
update (1)                          |
                                    |
Do cursor update work on both CRTCs |
                                    |
Clear atomic state (2)              |
**DONE**                            |
                                   ...
                                    |
                                    | Wait for flip_done() on CRTC 2
                                    | *ERROR*
                                    |

The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)

Some things to note:

* Due to the mirrored configuration, the cursor updates on both CRTCs.

* At this point, the pflip IRQ has already been handled, and flip_done
  signaled on all CRTCs. The cursor commit can therefore continue.

* The old_crtc_states used by the cursor update are the **same states**
  as the new_crtc_states used by the flip worker.

At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.

(*) Technically, 'state->crtcs[i].state' is freed, which was made to
    reference old_crtc_state in drm_atomic_helper_swap_state()

[How]

By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.

Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.

Signed-off-by: Shirish S 
Signed-off-by: Leo Li 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher