linux.git/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c, branch v5.14 Linux kernel source tree drm/amd/display: Add debugfs entry for dsc passthrough 2021-06-08T16:23:36+00:00 Fangzhi Zuo Jerry.Zuo@amd.com 2021-05-26T00:39:12+00:00 fcd1e484c8aedb0c125d4a22f7f20b418c4a9e6d [Why & How] Add debugfs entry to force dsc decoding at PCON when DSC capable external RX is connected. In such case, it is free to test DSC decoding at external RX or at PCON. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why & How]
Add debugfs entry to force dsc decoding at PCON when DSC capable
external RX is connected. In such case, it is free to test DSC
decoding at external RX or at PCON.

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: multi-eDP backlight support 2021-05-10T22:06:44+00:00 Mikita Lipski mikita.lipski@amd.com 2021-04-14T18:51:02+00:00 118b4627d6777d8d422786ded6a0bd8e2934d11f [why] Currently the assumption is that we are using a single eDP connector so there will only be one backlight object. Need changes to allow brightness update and reading for multiple eDP connectors. [how] - register a single device - turn backlight link from a pointer to an array of pointers - update brightness of all eDP links at the same time when request is registered - read brightness level only of the primary eDP panel - turn current_backlight_pwm and targer_backlight_pwm debugfs enteries into per connector enteries. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <waynelin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
Currently the assumption is that we are using a single eDP
connector so there will only be one backlight object. Need changes
to allow brightness update and reading for multiple eDP connectors.

[how]
- register a single device
- turn backlight link from a pointer to an array of pointers
- update brightness of all eDP links at the same time when request
is registered
- read brightness level only of the primary eDP panel
- turn current_backlight_pwm and targer_backlight_pwm debugfs enteries
into per connector enteries.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: fix wrong statement in mst hpd debugfs 2021-04-29T03:35:50+00:00 Mikita Lipski mikita.lipski@amd.com 2021-04-14T18:15:52+00:00 abf1f863e08dc23764ce617dd55e1b533e525a3f [why] Previous statement would always evaluate to true making it meaningless [how] Just check if a connector is MST by checking if its port exists. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <waynelin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
Previous statement would always evaluate to true
making it meaningless
[how]
Just check if a connector is MST by checking if its port exists.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Expose internal display flag via debugfs 2021-04-29T03:35:50+00:00 Stylon Wang stylon.wang@amd.com 2021-04-07T10:14:55+00:00 b7cc1312c110f8760a3d3e8e41a6d84e32f71a61 [Why & How] Add a per-connector debugfs entry to expose internal display flag, which is indication that the display is "internally connected" and not hotpluggable. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why & How]
Add a per-connector debugfs entry to expose internal display flag,
which is indication that the display is "internally connected"
and not hotpluggable.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add debugfs to repress HPD and HPR_RX IRQs 2021-04-15T20:31:59+00:00 Harry Wentland harry.wentland@amd.com 2020-10-02T17:32:00+00:00 b972b4f913eee029233be88e1a84a7cc36073c8b [Why] For debugging reasons it can be beneficial to disable any hotplug and DP shortpulse interrupt handling. [How] Expose a debugfs to set a flag to bypass HPD IRQ handling and skip IRQ handling if flag is set. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
For debugging reasons it can be beneficial to disable any hotplug and DP shortpulse interrupt handling.

[How]
Expose a debugfs to set a flag to bypass HPD IRQ handling and skip IRQ handling if flag is set.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add MST capability to trigger_hotplug interface 2021-04-09T20:53:12+00:00 Mikita Lipski mikita.lipski@amd.com 2020-09-15T12:50:49+00:00 41efcd3879b1df7213dcd1b190a9feb86765cc9b [Why] Need to be able to trigger software hotplug for MST connectors [How] For unplug the driver calls to disable topologies manager that connector is attached to. For plugging in it does the whole rediscovery of all connectors in drm device and enbles their topologies if attached. The interface for MST connectors works in the following way: 1. To disconnect all MST topologies currently connected: echo 0 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst 2. To reconnect/rediscover all topologies that are physically connected to the card: echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst A related fix which has been merged with this patch Leo Ma(Hanghong Ma)'s work: Set power states before disable MST topology [Why] When we try to disable MST topology from the debugfs entry, some receiver will hang. [How] Set DPCD 600h power states to 2(power down mode)before disable MST topology. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Need to be able to trigger software hotplug for MST connectors

[How]
For unplug the driver calls to disable topologies manager
that connector is attached to. For plugging in it does the
whole rediscovery of all connectors in drm device and enbles their
topologies if attached.

The interface for MST connectors works in the following way:

1. To disconnect all MST topologies currently connected:
   echo 0 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst

2. To reconnect/rediscover all topologies that are physically
connected to the card:
   echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst

A related fix which has been merged with this patch
Leo Ma(Hanghong Ma)'s work:

Set power states before disable MST topology
[Why]
	When we try to disable MST topology from the
	debugfs entry, some receiver will hang.
[How]
	Set DPCD 600h power states to
	2(power down mode)before disable MST topology.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Directly retrain link from debugfs 2021-04-09T20:53:10+00:00 Mikita Lipski mikita.lipski@amd.com 2020-08-13T13:44:45+00:00 f5b6a20c7ef40599095c796b0500d842ffdbc639 [why/how] Skip logic that sets preffered link settings and just retrain with new link_settings from Debugfs Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why/how]
Skip logic that sets preffered link settings
and just retrain with new link_settings from Debugfs

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add function and debugfs to dump DCC_EN bit 2021-04-09T20:52:03+00:00 Victor Lu victorchengchi.lu@amd.com 2020-07-22T20:16:48+00:00 712343cd21ea709ba63869f74246466524172ad4 [why] Currently to view the DCC_EN bit the entire DTN log must be dumped. A compact method to view the DCC_EN bit is desirable. [how] Introduce new debugfs interface that only dumps the DCC_EN bit. Example usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
Currently to view the DCC_EN bit the entire DTN log
must be dumped. A compact method to view the DCC_EN
bit is desirable.

[how]
Introduce new debugfs interface that only dumps the
DCC_EN bit.

Example usage:
cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add debugfs entry for LTTPR register status 2021-04-09T20:51:48+00:00 Aurabindo Pillai aurabindo.pillai@amd.com 2021-03-23T21:51:56+00:00 37bedd9929b925b25a4b5397d7f32d3600067688 [Why] Functionality of LTTPR is reporter through the DPCD register [How] Expose a interface in debugfs to read the current status of LTTPR as reported from the device's DPCD register Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[Why]
Functionality of LTTPR is reporter through the DPCD register

[How]
Expose a interface in debugfs to read the current status of
LTTPR as reported from the device's DPCD register

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix MST topology debugfs 2021-04-09T20:48:35+00:00 Eryk Brol eryk.brol@amd.com 2021-03-18T18:44:17+00:00 b9db41235a2a3de7e65891e30a9868fe50a2d7e1 [why] The drm dump_topology function was previously called on all DP connectors. This resulted in empty topology dumps for those connectors which weren't root MST nodes. [how] Make sure we only dump topology from the root MST node. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
[why]
The drm dump_topology function was previously called on all
DP connectors. This resulted in empty topology dumps for those
connectors which weren't root MST nodes.

[how]
Make sure we only dump topology from the root MST node.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>