is_hws_hang and is_resetting serves pretty much the same purpose and
they all duplicates the work of the reset_domain lock, just check that
directly instead. This also eliminate a few bugs listed below and get
rid of dqm->ops.pre_reset.

kfd_hws_hang did not need to avoid scheduling another reset. If the
on-going reset decided to skip GPU reset we have a bad time, otherwise
the extra reset will get cancelled anyway.

remove_queue_mes forgot to check is_resetting flag compared to the
pre-MES path unmap_queue_cpsch, so it did not block hw access during
reset correctly.

Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initial implementation, based on GFX11.

v2: squash in include fix from David (Alex)

Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop the navi10 in the name for consistency with other
families.  All gfx10 parts use the same implementation.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Now that we use the dGPU path for all APUs, drop the
IOMMUv2 support.

v2: drop the now unused queue manager functions for gfx7/8 APUs

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allow the debugger to get a snapshot of a specified number of queues
containing various queue property information that is copied to the
debugger.

Since the debugger doesn't know how many queues exist at any given time,
allow the debugger to pass the requested number of snapshots as 0 to get
the actual number of potential snapshots to use for a subsequent snapshot
request for actual information.

To prevent future ABI breakage, pass in the requested entry_size.
The KFD will return it's own entry_size in case the debugger still wants
log the information in a core dump on sizing failure.

Also allow the debugger to clear exceptions when doing a snapshot.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In order to inspect waves from the saved context at any point during a
debug session, the debugger must be able to preempt queues to trigger
context save by suspending them.

On queue suspend, the KFD will copy the context save header information
so that the debugger can correctly crawl the appropriate size of the saved
context. The debugger must then also be allowed to resume suspended queues.

A queue that is newly created cannot be suspended because queue ids are
recycled after destruction so the debugger needs to know that this has
occurred.  Query functions will be later added that will clear a given
queue of its new queue status.

A queue cannot be destroyed while it is suspended to preserve its saved
context during debugger inspection.  Have queue destruction block while
a queue is suspended and unblocked when it is resumed.  Likewise, if a
queue is about to be destroyed, it cannot be suspended.

Return the number of queues successfully suspended or resumed along with
a per queue status array where the upper bits per queue status show that
the request was invalid (new/destroyed queue suspend request, missing
queue) or an error occurred (HWS in a fatal state so it can't suspend or
resume queues).

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Unlike single process debug devices, multi-process debug devices allow
debug mode setting per-VMID (non-device-global).

Because the HWS manages PASID-VMID mapping, the new MAP_PROCESS API allows
the KFD to forward the required SPI debug register write requests.

To request a new debug mode setting change, the KFD must be able to
preempt all queues then remap all queues with these new setting
requests for MAP_PROCESS to take effect.

Note that by default, trap enablement in non-debug mode must be disabled
for performance reasons for multi-process debug devices due to setup
overhead in FW.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Older HW only supports debugging on a single process because the
SPI debug mode setting registers are device global.

The HWS has supplied a single pinned VMID (0xf) for MAP_PROCESS
for debug purposes. To pin the VMID, the KFD will remove the VMID from
the HWS dynamic VMID allocation via SET_RESOUCES so that a debugged
process will never migrate away from its pinned VMID.

The KFD is responsible for reserving and releasing this pinned VMID
accordingly whenever the debugger attaches and detaches respectively.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The HWS schedule allows a grace period for wave completion prior to
preemption for better performance by avoiding CWSR on waves that can
potentially complete quickly. The debugger, on the other hand, will
want to inspect wave status immediately after it actively triggers
preemption (a suspend function to be provided).

To minimize latency between preemption and debugger wave inspection, allow
immediate preemption by setting the grace period to 0.

Note that setting the preepmtion grace period to 0 will result in an
infinite grace period being set due to a CP FW bug so set it to 1 for now.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Setup rolling current_logical_xcc_id in MQD for GFX9.4.3
to ensure each queue starts at a different place and prevent
hotspotting issues. Also, remove updating current_logical_xcc_id
during queue update.

Suggested-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>