Skip the debugfs file creation for mes event log if the GPU
doesn't use MES. This to prevent potential kernel oops when
user try to read the event log in debugfs on a GPU without MES

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Enable the seq64 mapping sequence.
- Fix wflinfo va conflict and other bugs.

v1:
  - The seq64 area needs to be included in the AMDGPU_VA_RESERVED_SIZE
    otherwise the areas will conflict with user space allocations (Alex)

  - It needs to be mapped read only in the user VM (Alex)

v2:
  - Instead of just one define for TOP/BOTTOM
    reserved space separate them into two (Christian)

  - Fix the CPU and VA calculations and while at it
    also cleanup error handling and kerneldoc (Christian)

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

Updates for v6.8:

Core:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
  on register write
- Kconfig fix for QMP dependency
- DT schema fixes

DPU:
- Add support for SDM670, SM8650
- Enable SmartDMA on SM8350 and SM8450
- Correct UBWC settings for SC8280XP
- Fix catalog settings for SC8180X
- Actually make use of the version to switch between QSEED3/3LITE/4
  scalers
- Use devres-managed and drm-managed allocations where appropriate
- misc other fixes
- Enabled YUV writeback on SC7280, SM8250
- Enabled writeback on SM8350, SM8450
- CRC fix when encoder is selected as the input source
- other misc fixes

MDP4:
- Use devres-managed and drm-managed allocations where appropriate
- flush vblank event on CRTC disable

MDP5:
- Use devres-managed and drm-managed allocations where appropriate

DP:
- Add support for SM8650
- Enable PM runtime support
- Merge msm-specific debugfs dir with the generic one
- Described DisplayPort on SM8150 in DeviceTree bindings
- Moved dp_display_get_next_bridge() to probe()

DSI:
- Add support for SM8650
- Enable PM runtime support

GPU/GEM:
- demote userspace triggerable warnings to debug
- add GEM object metadata UAPI
- move GPU devcoredumps to GPU device
- fix hangcheck to skip retired submits
- expose UBWC config to userspace
- fix a680 chip-id
- drm_exec conversion
- drm/ci: remove rebase-merge directory (to unblock CI)

[airlied: fix drm_exec/amd interaction]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9auYqmo-7NSd9FsbNBCDf7aBevd=4xkcF3A5G_OGvMQ@mail.gmail.com

MES provides the driver a call to explicitly flush stale process memory
within the MES to avoid a race condition that results in a fatal
memory violation.

When SET_SHADER_DEBUGGER is called, the driver passes a memory address
that represents a process context address MES uses to keep track of
future per-process calls.

Normally, MES will purge its process context list when the last queue
has been removed.  The driver, however, can call SET_SHADER_DEBUGGER
regardless of whether a queue has been added or not.

If SET_SHADER_DEBUGGER has been called with no queues as the last call
prior to process termination, the passed process context address will
still reside within MES.

On a new process call to SET_SHADER_DEBUGGER, the driver may end up
passing an identical process context address value (based on per-process
gpu memory address) to MES but is now pointing to a new allocated buffer
object during KFD process creation.  Since the MES is unaware of this,
access of the passed address points to the stale object within MES and
triggers a fatal memory violation.

The solution is for KFD to explicitly flush the process context address
from MES on process termination.

Note that the flush call and the MES debugger calls use the same MES
interface but are separated as KFD calls to avoid conflicting with each
other.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In cases where the # is known ahead of time, it is silly to do the table
resize dance.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Patchwork: https://patchwork.freedesktop.org/patch/568338/

This is the generic SW part, prepare the event log buffer and dump it through debugfs

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use a proper MEID to make sure the CP_HQD_* and CP_GFX_HQD_* registers
can be touched when initialize the compute and gfx mqd in mes_self_test.
Otherwise, we expect no response from CP and an GRBM eventual timeout.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Use an inline function for version check. Gives more flexibility to
handle any format changes.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MES allocates process level doorbells, but there is no userspace
client to consume it. It was only being used for the MES ring
tests (in kernel), and was written by kernel doorbell write.

The previous patch of this series has changed the MES ring test code to
use kernel level MES doorbells. This patch now cleans up the process level
doorbell allocation code which is not required.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch:
- Removes the existing doorbell management code, and its variables
  from the doorbell_init function, it will be done in doorbell
  manager now.
- uses the doorbell page created for MES kernel level needs (doorbells
  for MES self tests)
- current MES code was allocating MES doorbells in MES process context,
  but those were getting written using kernel doorbell calls. This patch
  instead allocates a MES kernel doorbell for this (in add_hw_queue).

V2: Create an extra page of doorbells for MES during kernel doorbell
    creation (Alex)
V4: Move MES doorbell size and page offset objects in this patch from
    patch 6.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>