linux.git/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c, branch v6.5 Linux kernel source tree drm/amdgpu: Add memory partition mem_id to amdgpu_bo 2023-06-09T14:00:00+00:00 Philip Yang Philip.Yang@amd.com 2023-01-26T23:25:28+00:00 f24e924b7e8aba7b62671e7e1a19d83301a08597 Add mem_id_plus1 parameter to amdgpu_gem_object_create and pass it to amdgpu_bo_create. For dGPU mode allocation, mem_id is used by VRAM manager to get the memory partition fpfn, lpfn from xcp manager. For APU native mode allocation, mem_id is used to get NUMA node id from xcp manager, then pass to TTM as numa pool id to alloc memory from the specific NUMA node. mem_id -1 means for entire VRAM or any NUMA nodes. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Add mem_id_plus1 parameter to amdgpu_gem_object_create and pass it to
amdgpu_bo_create. For dGPU mode allocation, mem_id is used by VRAM
manager to get the memory partition fpfn, lpfn from xcp manager. For APU
native mode allocation, mem_id is used to get NUMA node id from xcp
manager, then pass to TTM as numa pool id to alloc memory from the
specific NUMA node. mem_id -1 means for entire VRAM or any NUMA nodes.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/amdgpu: Fix errors & warnings in amdgpu _bios, _cs, _dma_buf, _fence.c 2023-06-09T13:29:51+00:00 Srinivasan Shanmugam srinivasan.shanmugam@amd.com 2023-05-03T08:40:20+00:00 9e690184586bfb88efa176cdf912414f6c53519c The following checkpatch errors & warning is removed. ERROR: else should follow close brace '}' ERROR: trailing statements should be on next line WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Possible repeated word: 'Fences' WARNING: Missing a blank line after declarations WARNING: braces {} are not necessary for single statement blocks WARNING: Comparisons should place the constant on the right side of the test WARNING: printk() should include KERN_<LEVEL> facility level Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
The following checkpatch errors & warning is removed.

ERROR: else should follow close brace '}'
ERROR: trailing statements should be on next line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Possible repeated word: 'Fences'
WARNING: Missing a blank line after declarations
WARNING: braces {} are not necessary for single statement blocks
WARNING: Comparisons should place the constant on the right side of the test
WARNING: printk() should include KERN_<LEVEL> facility level

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/ttm: merge ttm_bo_api.h and ttm_bo_driver.h v2 2022-12-06T11:54:14+00:00 Christian König christian.koenig@amd.com 2022-05-09T19:13:35+00:00 a3185f91d0579b61a0a0dce3df1c67d6e324ebc8 Merge and cleanup the two headers into a single description of the object API. Also move all the documentation to the implementation and drop unnecessary includes from the header. No functional change. v2: minimal checkpatch.pl cleanup Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-4-christian.koenig@amd.com 
Merge and cleanup the two headers into a single description of the
object API. Also move all the documentation to the implementation and
drop unnecessary includes from the header.

No functional change.

v2: minimal checkpatch.pl cleanup

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-4-christian.koenig@amd.com
drm/amdgpu: Set MTYPE in PTE based on BO flags 2022-11-09T22:41:42+00:00 Felix Kuehling Felix.Kuehling@amd.com 2022-08-26T22:22:35+00:00 d1a372af1c3d834c2346b2e822cd6c40abc09866 The same BO may need different MTYPEs and SNOOP flags in PTEs depending on its current location relative to the mapping GPU. Setting MTYPEs from clients ahead of time is not practical for coherent memory sharing. Instead determine the correct MTYPE for the desired coherence model and current BO location when updating the page tables. To maintain backwards compatibility with MTYPE-selection in AMDGPU_VA_OP_MAP, the coherence-model-based MTYPE selection is only applied if it chooses an MTYPE other than MTYPE_NC (the default). Add two AMDGPU_GEM_CREATE_... flags to indicate the coherence model. The default if no flag is specified is non-coherent (i.e. coarse-grained coherent at dispatch boundaries). Update amdgpu_amdkfd_gpuvm.c to use this new method to choose the correct MTYPE depending on the current memory location. v2: * check that bo is not NULL (e.g. PRT mappings) * Fix missing ~ bitmask in gmc_v11_0.c v3: * squash in "drm/amdgpu: Inherit coherence flags on dmabuf import" Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
The same BO may need different MTYPEs and SNOOP flags in PTEs depending
on its current location relative to the mapping GPU. Setting MTYPEs from
clients ahead of time is not practical for coherent memory sharing.
Instead determine the correct MTYPE for the desired coherence model and
current BO location when updating the page tables.

To maintain backwards compatibility with MTYPE-selection in
AMDGPU_VA_OP_MAP, the coherence-model-based MTYPE selection is only
applied if it chooses an MTYPE other than MTYPE_NC (the default).

Add two AMDGPU_GEM_CREATE_... flags to indicate the coherence model. The
default if no flag is specified is non-coherent (i.e. coarse-grained
coherent at dispatch boundaries).

Update amdgpu_amdkfd_gpuvm.c to use this new method to choose the
correct MTYPE depending on the current memory location.

v2:
* check that bo is not NULL (e.g. PRT mappings)
* Fix missing ~ bitmask in gmc_v11_0.c
v3:
* squash in "drm/amdgpu: Inherit coherence flags on dmabuf import"

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Use simplified API for p2p dist calc 2022-09-29T13:41:42+00:00 Lijo Lazar lijo.lazar@amd.com 2022-09-21T12:24:59+00:00 bb66ecbf122cc5ca52c569f0f84b5d1b2c00f6b9 Use the simpified API that calculates distance between two devices. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Use the simpified API that calculates distance between two devices.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Disable verbose for p2p dist calc 2022-09-29T13:41:42+00:00 Lijo Lazar lijo.lazar@amd.com 2022-09-21T12:07:37+00:00 d0fa84f174770679ea22076f4f754bfde2f3f0e1 Disable verbose while getting p2p distance. With verbose, it shows warning if ACS redirect is set between the devices. Adds noise to dmesg logs when a few GPU devices are on the same platform. Example log: amdgpu 0000:34:00.0: ACS redirect is set between the client and provider (0000:31:00.0) amdgpu 0000:34:00.0: to disable ACS redirect for this path, add the kernel parameter: pci=disable_acs_redir=0000:30:00.0;0000:2e:00.0;0000:33:00.0;0000:2e:10.0 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Disable verbose while getting p2p distance. With verbose, it shows
warning if ACS redirect is set between the devices. Adds noise
to dmesg logs when a few GPU devices are on the same platform.

Example log:

amdgpu 0000:34:00.0: ACS redirect is set between the client and provider (0000:31:00.0)
amdgpu 0000:34:00.0: to disable ACS redirect for this path, add the kernel parameter:
	pci=disable_acs_redir=0000:30:00.0;0000:2e:00.0;0000:33:00.0;0000:2e:10.0

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dma-buf: wait for map to complete for static attachments 2022-04-07T10:53:54+00:00 Christian König christian.koenig@amd.com 2021-11-23T08:58:36+00:00 46b35b33cc561f0b1e61dcd518e2588cb168dd3f We have previously done that in the individual drivers but it is more defensive to move that into the common code. Dynamic attachments should wait for map operations to complete by themselves. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-12-christian.koenig@amd.com 
We have previously done that in the individual drivers but it is
more defensive to move that into the common code.

Dynamic attachments should wait for map operations to complete by themselves.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-12-christian.koenig@amd.com
Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm 2022-01-10T20:58:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-01-10T20:58:46+00:00 8d0749b4f83bf4768ceae45ee6a79e6e7eddfc2a Pull drm updates from Dave Airlie: "Highlights are support for privacy screens found in new laptops, a bunch of nomodeset refactoring, and i915 enables ADL-P systems by default, while starting to add RPL-S support. vmwgfx adds GEM and support for OpenGL 4.3 features in userspace. Lots of internal refactorings around dma reservations, and lots of driver refactoring as well. Summary: core: - add privacy screen support - move nomodeset option into drm subsystem - clean up nomodeset handling in drivers - make drm_irq.c legacy - fix stack_depot name conflicts - remove DMA_BUF_SET_NAME ioctl restrictions - sysfs: send hotplug event - replace several DRM_* logging macros with drm_* - move hashtable to legacy code - add error return from gem_create_object - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER - kernel.h related include cleanups - support XRGB2101010 source buffers ttm: - don't include drm hashtable - stop pruning fences after wait - documentation updates dma-buf: - add dma_resv selftest - add debugfs helpers - remove dma_resv_get_excl_unlocked - documentation - make fences mandatory in dma_resv_add_excl_fence dp: - add link training delay helpers gem: - link shmem/cma helpers into separate modules - use dma_resv iteratior - import dma-buf namespace into gem helper modules scheduler: - fence grab fix - lockdep fixes bridge: - switch to managed MIPI DSI helpers - register and attach during probe fixes - convert to YAML in several places. panel: - add bunch of new panesl simpledrm: - support FB_DAMAGE_CLIPS - support virtual screen sizes - add Apple M1 support amdgpu: - enable seamless boot for DCN 3.01 - runtime PM fixes - use drm_kms_helper_connector_hotplug_event - get all fences at once - use generic drm fb helpers - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes - add smart trace buffer (STB) for supported GPUs - display debugfs entries - new SMU debug option - Documentation update amdkfd: - IP discovery enumeration refactor - interface between driver fixes - SVM fixes - kfd uapi header to define some sysfs bitfields. i915: - support VESA panel backlights - enable ADL-P by default - add eDP privacy screen support - add Raptor Lake S (RPL-S) support - DG2 page table support - lots of GuC/HuC fw refactoring - refactored i915->gt interfaces - CD clock squashing support - enable 10-bit gamma support - update ADL-P DMC fw to v2.14 - enable runtime PM autosuspend by default - ADL-P DSI support - per-lane DP drive settings for ICL+ - add support for pipe C/D DMC firmware - Atomic gamma LUT updates - remove CCS FB stride restrictions on ADL-P - VRR platform support for display 11 - add support for display audio codec keepalive - lots of display refactoring - fix runtime PM handling during PXP suspend - improved eviction performance with async TTM moves - async VMA unbinding improvements - VMA locking refactoring - improved error capture robustness - use per device iommu checks - drop bits stealing from i915_sw_fence function ptr - remove dma_resv_prune - add IC cache invalidation on DG2 nouveau: - crc fixes - validate LUTs in atomic check - set HDMI AVI RGB quant to full tegra: - buffer objects reworks for dma-buf compat - NVDEC driver uAPI support - power management improvements etnaviv: - IOMMU enabled system support - fix > 4GB command buffer mapping - close a DoS vector - fix spurious GPU resets ast: - fix i2c initialization rcar-du: - DSI output support exynos: - replace legacy gpio interface - implement generic GEM object mmap msm: - dpu plane state cleanup in prep for multirect - dpu debugfs cleanups - dp support for sc7280 - a506 support - removal of struct_mutex - remove old eDP sub-driver anx7625: - support MIPI DSI input - support HDMI audio - fix reading EDID lvds: - fix bridge DT bindings megachips: - probe both bridges before registering dw-hdmi: - allow interlace on bridge ps8640: - enable runtime PM - support aux-bus tx358768: - enable reference clock - add pulse mode support ti-sn65dsi86: - use regmap bulk write - add PWM support etnaviv: - get all fences at once gma500: - gem object cleanups kmb: - enable fb console radeon: - use dma_resv_wait_timeout rockchip: - add DSP hold timeout - suspend/resume fixes - PLL clock fixes - implement mmap in GEM object functions - use generic fbdev emulation sun4i: - use CMA helpers without vmap support vc4: - fix HDMI-CEC hang with display is off - power on HDMI controller while disabling - support 4K@60Hz modes - support 10-bit YUV 4:2:0 output vmwgfx: - fix leak on probe errors - fail probing on broken hosts - new placement for MOB page tables - hide internal BOs from userspace - implement GEM support - implement GL 4.3 support virtio: - overflow fixes xen: - implement mmap as GEM object function omapdrm: - fix scatterlist export - support virtual planes mediatek: - MT8192 support - CMDQ refinement" * tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits) drm/amdgpu: no DC support for headless chips drm/amd/display: fix dereference before NULL check drm/amdgpu: always reset the asic in suspend (v2) drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform drm/amd/display: Fix the uninitialized variable in enable_stream_features() drm/amdgpu: fix runpm documentation amdgpu/pm: Make sysfs pm attributes as read-only for VFs drm/amdgpu: save error count in RAS poison handler drm/amdgpu: drop redundant semicolon drm/amd/display: get and restore link res map drm/amd/display: support dynamic HPO DP link encoder allocation drm/amd/display: access hpo dp link encoder only through link resource drm/amd/display: populate link res in both detection and validation drm/amd/display: define link res and make it accessible to all link interfaces drm/amd/display: 3.2.167 drm/amd/display: [FW Promotion] Release 0.0.98 drm/amd/display: Undo ODM combine drm/amd/display: Add reg defs for DCN303 drm/amd/display: Changed pipe split policy to allow for multi-display pipe split drm/amd/display: Set optimize_pwr_state for DCN31 ... 
Pull drm updates from Dave Airlie:
 "Highlights are support for privacy screens found in new laptops, a
  bunch of nomodeset refactoring, and i915 enables ADL-P systems by
  default, while starting to add RPL-S support.

  vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.

  Lots of internal refactorings around dma reservations, and lots of
  driver refactoring as well.

  Summary:

  core:
   - add privacy screen support
   - move nomodeset option into drm subsystem
   - clean up nomodeset handling in drivers
   - make drm_irq.c legacy
   - fix stack_depot name conflicts
   - remove DMA_BUF_SET_NAME ioctl restrictions
   - sysfs: send hotplug event
   - replace several DRM_* logging macros with drm_*
   - move hashtable to legacy code
   - add error return from gem_create_object
   - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
   - kernel.h related include cleanups
   - support XRGB2101010 source buffers

  ttm:
   - don't include drm hashtable
   - stop pruning fences after wait
   - documentation updates

  dma-buf:
   - add dma_resv selftest
   - add debugfs helpers
   - remove dma_resv_get_excl_unlocked
   - documentation
   - make fences mandatory in dma_resv_add_excl_fence

  dp:
   - add link training delay helpers

  gem:
   - link shmem/cma helpers into separate modules
   - use dma_resv iteratior
   - import dma-buf namespace into gem helper modules

  scheduler:
   - fence grab fix
   - lockdep fixes

  bridge:
   - switch to managed MIPI DSI helpers
   - register and attach during probe fixes
   - convert to YAML in several places.

  panel:
   - add bunch of new panesl

  simpledrm:
   - support FB_DAMAGE_CLIPS
   - support virtual screen sizes
   - add Apple M1 support

  amdgpu:
   - enable seamless boot for DCN 3.01
   - runtime PM fixes
   - use drm_kms_helper_connector_hotplug_event
   - get all fences at once
   - use generic drm fb helpers
   - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
   - add smart trace buffer (STB) for supported GPUs
   - display debugfs entries
   - new SMU debug option
   - Documentation update

  amdkfd:
   - IP discovery enumeration refactor
   - interface between driver fixes
   - SVM fixes
   - kfd uapi header to define some sysfs bitfields.

  i915:
   - support VESA panel backlights
   - enable ADL-P by default
   - add eDP privacy screen support
   - add Raptor Lake S (RPL-S) support
   - DG2 page table support
   - lots of GuC/HuC fw refactoring
   - refactored i915->gt interfaces
   - CD clock squashing support
   - enable 10-bit gamma support
   - update ADL-P DMC fw to v2.14
   - enable runtime PM autosuspend by default
   - ADL-P DSI support
   - per-lane DP drive settings for ICL+
   - add support for pipe C/D DMC firmware
   - Atomic gamma LUT updates
   - remove CCS FB stride restrictions on ADL-P
   - VRR platform support for display 11
   - add support for display audio codec keepalive
   - lots of display refactoring
   - fix runtime PM handling during PXP suspend
   - improved eviction performance with async TTM moves
   - async VMA unbinding improvements
   - VMA locking refactoring
   - improved error capture robustness
   - use per device iommu checks
   - drop bits stealing from i915_sw_fence function ptr
   - remove dma_resv_prune
   - add IC cache invalidation on DG2

  nouveau:
   - crc fixes
   - validate LUTs in atomic check
   - set HDMI AVI RGB quant to full

  tegra:
   - buffer objects reworks for dma-buf compat
   - NVDEC driver uAPI support
   - power management improvements

  etnaviv:
   - IOMMU enabled system support
   - fix > 4GB command buffer mapping
   - close a DoS vector
   - fix spurious GPU resets

  ast:
   - fix i2c initialization

  rcar-du:
   - DSI output support

  exynos:
   - replace legacy gpio interface
   - implement generic GEM object mmap

  msm:
   - dpu plane state cleanup in prep for multirect
   - dpu debugfs cleanups
   - dp support for sc7280
   - a506 support
   - removal of struct_mutex
   - remove old eDP sub-driver

  anx7625:
   - support MIPI DSI input
   - support HDMI audio
   - fix reading EDID

  lvds:
   - fix bridge DT bindings

  megachips:
   - probe both bridges before registering

  dw-hdmi:
   - allow interlace on bridge

  ps8640:
   - enable runtime PM
   - support aux-bus

  tx358768:
   - enable reference clock
   - add pulse mode support

  ti-sn65dsi86:
   - use regmap bulk write
   - add PWM support

  etnaviv:
   - get all fences at once

  gma500:
   - gem object cleanups

  kmb:
   - enable fb console

  radeon:
   - use dma_resv_wait_timeout

  rockchip:
   - add DSP hold timeout
   - suspend/resume fixes
   - PLL clock fixes
   - implement mmap in GEM object functions
   - use generic fbdev emulation

  sun4i:
   - use CMA helpers without vmap support

  vc4:
   - fix HDMI-CEC hang with display is off
   - power on HDMI controller while disabling
   - support 4K@60Hz modes
   - support 10-bit YUV 4:2:0 output

  vmwgfx:
   - fix leak on probe errors
   - fail probing on broken hosts
   - new placement for MOB page tables
   - hide internal BOs from userspace
   - implement GEM support
   - implement GL 4.3 support

  virtio:
   - overflow fixes

  xen:
   - implement mmap as GEM object function

  omapdrm:
   - fix scatterlist export
   - support virtual planes

  mediatek:
   - MT8192 support
   - CMDQ refinement"

* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
  drm/amdgpu: no DC support for headless chips
  drm/amd/display: fix dereference before NULL check
  drm/amdgpu: always reset the asic in suspend (v2)
  drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
  drm/amd/display: Fix the uninitialized variable in enable_stream_features()
  drm/amdgpu: fix runpm documentation
  amdgpu/pm: Make sysfs pm attributes as read-only for VFs
  drm/amdgpu: save error count in RAS poison handler
  drm/amdgpu: drop redundant semicolon
  drm/amd/display: get and restore link res map
  drm/amd/display: support dynamic HPO DP link encoder allocation
  drm/amd/display: access hpo dp link encoder only through link resource
  drm/amd/display: populate link res in both detection and validation
  drm/amd/display: define link res and make it accessible to all link interfaces
  drm/amd/display: 3.2.167
  drm/amd/display: [FW Promotion] Release 0.0.98
  drm/amd/display: Undo ODM combine
  drm/amd/display: Add reg defs for DCN303
  drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
  drm/amd/display: Set optimize_pwr_state for DCN31
  ...
drm/amdgpu: fix dropped backing store handling in amdgpu_dma_buf_move_notify 2021-12-17T10:26:40+00:00 Christian König ckoenig.leichtzumerken@gmail.com 2021-12-10T08:39:27+00:00 fc74881c28d314b10efac016ef49df4ff40b8b97 bo->tbo.resource can now be NULL. Signed-off-by: Christian König <christian.koenig@amd.com> Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1811 Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211210083927.1754-1-christian.koenig@amd.com 
bo->tbo.resource can now be NULL.

Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1811
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210083927.1754-1-christian.koenig@amd.com
drm/amdgpu: don't skip runtime pm get on A+A config 2021-12-09T16:13:17+00:00 Christian König christian.koenig@amd.com 2021-12-06T08:42:02+00:00 21a6732f464894fa43fa1d43fdc7570b454b970c The runtime PM get was incorrectly added after the check. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206084551.92502-1-christian.koenig@amd.com 
The runtime PM get was incorrectly added after the check.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206084551.92502-1-christian.koenig@amd.com