linux.git/drivers/gpio, branch v6.5-rc2

Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2023-06-30T21:57:19+00:00

Pull pin control updates from Linus Walleij:
 "No core changes this time

  New drivers:

   - Tegra234 support

   - Qualcomm IPQ5018 support

   - Intel Meteor Lake-S support

   - Qualcomm SDX75 subdriver

   - Qualcomm SPMI-based PM8953 support

  Improvements:

   - Fix up support for GPIO3 on the AXP209

   - Push-pull drive configuration support for the AT91 PIO4

   - Fix misc non-urgent bugs in the AMD driver

   - Misc non-urgent improved error handling

   - Misc janitorial and minor improvements"

* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: cherryview: Drop goto label
  pinctrl: baytrail: invert if condition
  pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
  pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
  pinctrl: tegra: avoid duplicate field initializers
  dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
  pinctrl: mlxbf3: remove broken Kconfig 'select'
  pinctrl: spear: Remove unused of_gpio.h inclusion
  pinctrl: lantiq: Remove unused of_gpio.h inclusion
  pinctrl: at91-pio4: check return value of devm_kasprintf()
  pinctrl: microchip-sgpio: check return value of devm_kasprintf()
  pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
  pinctrl: intel: refine ->irq_set_type() hook
  pinctrl: intel: refine ->set_mux() hook
  pinctrl: baytrail: Use str_hi_lo() helper
  lib/string_choices: Add str_high_low() helper
  lib/string_helpers: Split out string_choices.h
  lib/string_helpers: Add missing header files to MAINTAINERS database
  pinctrl: npcm7xx: Add missing check for ioremap
  pinctrl:sunplus: Add check for kmalloc
  ...

Merge tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2023-06-29T17:11:10+00:00

Pull gpio updates from Bartosz Golaszewski:
 "We have two new drivers, some improvements to the core code, lots of
  different updates to existing GPIO drivers and some dt-bindings on
  top.

  There's nothing controversial in here and almost everything has been
  in next for more than a week (95% a lot longer than this). The only
  thing that has spent less time in next is a new driver so no risk of
  regressions.

  The single merge pulls in changes that remove all usage of global GPIO
  numbers from arch/arm/mach-omap.

  Core GPIO library:
   - remove unused symbols
   - don't spam the kernel log with messages about hogs
   - remove old sysfs API cruft
   - improve handling of GPIO masks

  New drivers:
   - add a driver for the BlueField-3 GPIO controller
   - add GPIO support for the TPS65219 PMIC

  Driver improvements:
   - extend the gpio-aggregator driver to support ramp-up/ramp-down
     delay
   - remove unnecessary CONFIG_OF guards from gpio-aggregator
   - readability improvements in gpio-tangier
   - switch i2c drivers back to using probe() now that it's been
     converted in the i2c subsystem to not taking the id parameter
   - remove unused inclusions of of_gpio.h in several drivers
   - make pm ops static in gpio-davinci and fix a comment
   - use more devres in drivers to shrink and simplify the code
   - add missing include in gpio-sa1100
   - add HAS_IOPORT KConfig dependency where needed
   - add permissions checks before accessing pins in gpio-tegra186
   - convert the gpio-zynq driver to using immutable irqchips
   - preserve output settings set by the bootloader in gpio-mpc8xxx

  Selftests:
   - tweak the variable naming in script tests

  Device tree updates:
   - convert gpio-mmio and gpio-stmpe to YAML
   - add parsing of GPIO hogs to gpio-vf610
   - add bindings for the Cirrus EP93xx GPIO controller
   - add gpio-line-names property to the gpio-pca9570 bindings
   - extend the binding for x-powers,axp209 with another block"

* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
  of: unittest: drop assertions for GPIO hog messages
  gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
  gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
  dt-bindings: gpio: gpio-vf610: Add parsing of hogs
  gpio: lpc18xx: Remove unused of_gpio.h inclusion
  gpio: xra1403: Remove unused of_gpio.h inclusion
  gpio: mpc8xxx: Remove unused of_gpio.h inclusion
  dt-bindings: gpio: Add Cirrus EP93xx
  gpio: mpc8xxx: latch GPIOs state on module load when configured as output
  selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
  gpio: mlxbf3: Add gpio driver support
  gpio: delay: Remove duplicative functionality
  gpio: aggregator: Set up a parser of delay line parameters
  gpio: aggregator: Support delay for setting up individual GPIOs
  gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
  dt-bindings: gpio: pca9570: add gpio-line-names property
  gpiolib: remove unused gpio_cansleep()
  gpio: tps65219: add GPIO support for TPS65219 PMIC
  gpio: zynq: fix zynqmp_gpio not an immutable chip warning
  gpio: davinci: make davinci_gpio_dev_pm_ops static
  ...

Merge tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

2023-06-28T20:26:19+00:00

Pull regmap updates from Mark Brown:
 "Another busy release for regmap with the second half of the maple tree
  register cache implementation, there's some smaller optimisations that
  could be done but this should now be able to replace the rbtree cache
  for most devices.

  We also had a followup from Aidan MacDonald's refactoring of some of
  the regmap-irq interfaces, the conversion is complete so the old
  interfaces are removed. This means that even with the new features for
  the maple tree cache we'd have a nice negative diffstat were it not
  for the addition of a bunch more KUnit coverage.

  There's one GPIO patch in here, it was a dependency for a cleanup of
  an API in the regmap-irq code for which the gpio-104-dio-48e driver
  was the only user.

  Highlights:

   - The maple tree cache can now load in default values more
     efficiently, and is capabale of syncing multiple registers
     in a single write during cache sync

   - More KUnit coverage, including some coverage for raw I/O
     and a dummy RAM backed cache to support it

   - Removal of several old interfaces in regmap-irq now all
     users have been modernised"

* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
  regmap: Allow reads from write only registers with the flat cache
  regmap: Drop early readability check
  regmap: Check for register readability before checking cache during read
  regmap: Add test to make sure we don't sync to read only registers
  regmap: Add a test case for write only registers
  regmap: Add test that writes to write only registers are prevented
  regmap: Add debugfs file for forcing field writes
  regmap: Don't check for changes in regcache_set_val()
  regmap: maple: Implement block sync for the maple tree cache
  regmap: Provide basic KUnit coverage for the raw register I/O
  regmap: Provide a ram backed regmap with raw support
  regmap: Add missing cache_only checks
  regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
  regmap: Load register defaults in blocks rather than register by register
  regmap: mmio: Allow passing an empty config->reg_stride
  regmap-irq: Drop backward compatibility for inverted mask/unmask
  regmap-irq: Minor adjustments to .handle_mask_sync()
  regmap-irq: Remove support for not_fixed_stride
  regmap-irq: Remove type registers
  regmap-irq: Remove virtual registers
  ...

gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip

2023-06-19T13:00:25+00:00

It seems there is no driver that requires custom IRQ chip
domain options. Drop the member and respective code.

Signed-off-by: Andy Shevchenko 
Reviewed-by: Linus Walleij 
Acked-by: Marc Zyngier 
Signed-off-by: Bartosz Golaszewski

gpiolib: Fix irq_domain resource tracking for gpiochip_irqchip_add_domain()

2023-06-19T12:57:38+00:00

Up until commit 6a45b0e2589f ("gpiolib: Introduce
gpiochip_irqchip_add_domain()") all irq_domains were allocated
by gpiolib itself and thus gpiolib also takes care of freeing it.

With gpiochip_irqchip_add_domain() a user of gpiolib can associate an
irq_domain with the gpio_chip. This irq_domain is not managed by
gpiolib and therefore must not be freed by gpiolib.

Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Reported-by: Jiawen Wu 
Signed-off-by: Michael Walle 
Reviewed-by: Linus Walleij 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Bartosz Golaszewski

gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres

2023-06-19T12:50:28+00:00

The driver now uses the generic request/release callbacks, so the custom
ones are no longer called. When building with -Woverride-init, gcc produces
a warning about the duplicate entries:

In file included from drivers/gpio/gpio-zynq.c:10:
include/linux/gpio/driver.h:621:43: error: initialized field overwritten [-Werror=override-init]
  621 |                 .irq_request_resources  = gpiochip_irq_reqres,          \
      |                                           ^~~~~~~~~~~~~~~~~~~
drivers/gpio/gpio-zynq.c:611:9: note: in expansion of macro 'GPIOCHIP_IRQ_RESOURCE_HELPERS'
  611 |         GPIOCHIP_IRQ_RESOURCE_HELPERS,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/gpio/driver.h:621:43: note: (near initialization for 'zynq_gpio_level_irqchip.irq_request_resources')
  621 |                 .irq_request_resources  = gpiochip_irq_reqres,          \
      |                                           ^~~~~~~~~~~~~~~~~~~
drivers/gpio/gpio-zynq.c:625:9: note: in expansion of macro 'GPIOCHIP_IRQ_RESOURCE_HELPERS'
  625 |         GPIOCHIP_IRQ_RESOURCE_HELPERS,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/gpio/driver.h:622:43: error: initialized field overwritten [-Werror=override-init]
  622 |                 .irq_release_resources  = gpiochip_irq_relres
      |                                           ^~~~~~~~~~~~~~~~~~~

Removing the old ones has no effect on the driver but avoids the warnings.

Fixes: f569143935378 ("gpio: zynq: fix zynqmp_gpio not an immutable chip warning")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Linus Walleij 
Signed-off-by: Bartosz Golaszewski

gpio: lpc18xx: Remove unused of_gpio.h inclusion

2023-06-19T12:45:29+00:00

of_gpio.h shouldn't be used in GPIO drivers. Remove it.

Signed-off-by: Andy Shevchenko 
Reviewed-by: Linus Walleij 
Acked-by: Vladimir Zapolskiy 
Signed-off-by: Bartosz Golaszewski

gpio: xra1403: Remove unused of_gpio.h inclusion

2023-06-19T12:45:21+00:00

of_gpio.h shouldn't be used in GPIO drivers. Remove it.

Signed-off-by: Andy Shevchenko 
Reviewed-by: Linus Walleij 
Signed-off-by: Bartosz Golaszewski

gpio: mpc8xxx: Remove unused of_gpio.h inclusion

2023-06-19T12:45:15+00:00

of_gpio.h shouldn't be used in GPIO drivers. Remove it.

Signed-off-by: Andy Shevchenko 
Reviewed-by: Pali Rohár 
Signed-off-by: Bartosz Golaszewski

gpio: mpc8xxx: latch GPIOs state on module load when configured as output

2023-06-16T09:11:27+00:00

Qoriq and related devices allow reading out state of GPIO set as output.
However, currently on driver's init, all outputs are configured as driven
low. So, any changes to GPIO confiuration will drive all pins (configured
as output) as output-low.
This patch latches state of output GPIOs before any GPIO configuration
takes place. This preserves any output settings done prior to loading
the driver (for example, by u-boot).

Signed-off-by: Michal Smulski 
Signed-off-by: Bartosz Golaszewski