linux.git/drivers/gpio, branch v4.9-rc3 Linux kernel source tree gpio: mpc8xxx: Correct irq handler function 2016-10-24T00:20:40+00:00 Liu Gang Gang.Liu@nxp.com 2016-10-21T07:31:28+00:00 d71cf15b865bdd45925f7b094d169aaabd705145 From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq" has being used to handle GPIO interrupts in the PowerPC/Layerscape platforms. But actually, almost all PowerPC/Layerscape platforms assert an interrupt request upon either a high-to-low change or any change on the state of the signal. So the "handle_level_irq" is not reasonable for PowerPC/Layerscape GPIO interrupt, it should be "handle_edge_irq". Otherwise the system may lost some interrupts from the PIN's state changes. Signed-off-by: Liu Gang <Gang.Liu@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq"
has being used to handle GPIO interrupts in the PowerPC/Layerscape
platforms. But actually, almost all PowerPC/Layerscape platforms
assert an interrupt request upon either a high-to-low change or
any change on the state of the signal.

So the "handle_level_irq" is not reasonable for PowerPC/Layerscape
GPIO interrupt, it should be "handle_edge_irq". Otherwise the system
may lost some interrupts from the PIN's state changes.

Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: ath79: Fix module autoload 2016-10-23T22:23:05+00:00 Javier Martinez Canillas javier@osg.samsung.com 2016-10-18T20:44:01+00:00 6d8d271eee0eaa3c3ffd6db29a825e02316359d4 If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/gpio/gpio-ath79.ko | grep alias $ After this patch: $ modinfo drivers/gpio/gpio-ath79.ko | grep alias alias: of:N*T*Cqca,ar9340-gpioC* alias: of:N*T*Cqca,ar9340-gpio alias: of:N*T*Cqca,ar7100-gpioC* alias: of:N*T*Cqca,ar7100-gpio Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Aban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/gpio/gpio-ath79.ko | grep alias
$

After this patch:

$ modinfo drivers/gpio/gpio-ath79.ko | grep alias
alias:          of:N*T*Cqca,ar9340-gpioC*
alias:          of:N*T*Cqca,ar9340-gpio
alias:          of:N*T*Cqca,ar7100-gpioC*
alias:          of:N*T*Cqca,ar7100-gpio

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Aban Bedel <albeu@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: ts4800: Fix module autoload 2016-10-21T12:55:07+00:00 Javier Martinez Canillas javier@osg.samsung.com 2016-10-18T20:44:02+00:00 91f1551a746f62937957fa1bff4165e1b7a45337 If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/gpio/gpio-ts4800.ko | grep alias $ After this patch: $ modinfo drivers/gpio/gpio-ts4800.ko | grep alias alias: of:N*T*Ctechnologic,ts4800-gpioC* alias: of:N*T*Ctechnologic,ts4800-gpio Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/gpio/gpio-ts4800.ko | grep alias
$

After this patch:

$ modinfo drivers/gpio/gpio-ts4800.ko | grep alias
alias:          of:N*T*Ctechnologic,ts4800-gpioC*
alias:          of:N*T*Ctechnologic,ts4800-gpio

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: GPIO_GET_LINEEVENT_IOCTL: Reject invalid line and event flags 2016-10-21T12:48:56+00:00 Lars-Peter Clausen lars@metafoo.de 2016-10-18T14:54:06+00:00 ac7dbb991ee5afc0beacce3a252dcaaa249a7786 The GPIO_GET_LINEEVENT_IOCTL currently ignores unknown or undefined linehandle and lineevent flags. From a backwards and forwards compatibility viewpoint it is highly desirable to reject unknown flags though. On one hand an application that is using newer flags and is running on an older kernel has no way to detect if the new flags were handled correctly if they are silently discarded. On the other hand an application that (accidentally) passes undefined flags will run fine on an older kernel, but may break on a newer kernel when these flags get defined. Ensure that requests that have undefined flags set are rejected with an error, rather than silently discarding the undefined flags. Cc: stable@vger.kernel.org Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The GPIO_GET_LINEEVENT_IOCTL currently ignores unknown or undefined
linehandle and lineevent flags. From a backwards and forwards compatibility
viewpoint it is highly desirable to reject unknown flags though.

On one hand an application that is using newer flags and is running on
an older kernel has no way to detect if the new flags were handled
correctly if they are silently discarded.

On the other hand an application that (accidentally) passes undefined flags
will run fine on an older kernel, but may break on a newer kernel when
these flags get defined.

Ensure that requests that have undefined flags set are rejected with an
error, rather than silently discarding the undefined flags.

Cc: stable@vger.kernel.org
Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: GPIO_GET_LINEHANDLE_IOCTL: Reject invalid line flags 2016-10-21T12:47:44+00:00 Lars-Peter Clausen lars@metafoo.de 2016-10-18T14:54:05+00:00 e3e847c7f15a27c80f526b2a7a8d4dd7ce0960a0 The GPIO_GET_LINEHANDLE_IOCTL currently ignores unknown or undefined linehandle flags. From a backwards and forwards compatibility viewpoint it is highly desirable to reject unknown flags though. On one hand an application that is using newer flags and is running on an older kernel has no way to detect if the new flags were handled correctly if they are silently discarded. On the other hand an application that (accidentally) passes undefined flags will run fine on an older kernel, but may break on a newer kernel when these flags get defined. Ensure that requests that have undefined flags set are rejected with an error, rather than silently discarding the undefined flags. Cc: stable@vger.kernel.org Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The GPIO_GET_LINEHANDLE_IOCTL currently ignores unknown or undefined
linehandle flags. From a backwards and forwards compatibility viewpoint it
is highly desirable to reject unknown flags though.

On one hand an application that is using newer flags and is running on
an older kernel has no way to detect if the new flags were handled
correctly if they are silently discarded.

On the other hand an application that (accidentally) passes undefined flags
will run fine on an older kernel, but may break on a newer kernel when
these flags get defined.

Ensure that requests that have undefined flags set are rejected with an
error, rather than silently discarding the undefined flags.

Cc: stable@vger.kernel.org
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: GPIOHANDLE_GET_LINE_VALUES_IOCTL: Fix information leak 2016-10-21T12:46:28+00:00 Lars-Peter Clausen lars@metafoo.de 2016-10-18T14:54:02+00:00 3eded5d83bf4e36ad78775c7ceb44a45480b0abd The GPIOHANDLE_GET_LINE_VALUES_IOCTL handler allocates a gpiohandle_data struct on the stack and then passes it to copy_to_user(). But depending on the number of requested line handles the struct is only partially initialized. This exposes the previous, potentially sensitive, stack content to the issuing userspace application. To avoid this make sure that the struct is fully initialized. Cc: stable@vger.kernel.org Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The GPIOHANDLE_GET_LINE_VALUES_IOCTL handler allocates a gpiohandle_data
struct on the stack and then passes it to copy_to_user(). But depending on
the number of requested line handles the struct is only partially
initialized.

This exposes the previous, potentially sensitive, stack content to the
issuing userspace application. To avoid this make sure that the struct is
fully initialized.

Cc: stable@vger.kernel.org
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: GPIO_GET_LINEEVENT_IOCTL: Validate line offset 2016-10-21T12:41:38+00:00 Lars-Peter Clausen lars@metafoo.de 2016-10-18T14:54:03+00:00 b8b0e3d303654b3bb7b31b0266c513fd6f4132ce The line offset that is used as an index into the descs array is provided by userspace and might go beyond the bounds of the array. If that happens undefined behavior will occur. Make sure that the offset is within the bounds of the desc array and reject any requests that specify a value outside of it. Cc: stable@vger.kernel.org Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The line offset that is used as an index into the descs array is provided
by userspace and might go beyond the bounds of the array. If that happens
undefined behavior will occur.

Make sure that the offset is within the bounds of the desc array and reject
any requests that specify a value outside of it.

Cc: stable@vger.kernel.org
Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: GPIOHANDLE_GET_LINE_VALUES_IOCTL: Fix information leak 2016-10-21T12:40:29+00:00 Lars-Peter Clausen lars@metafoo.de 2016-10-18T14:54:04+00:00 d82aa4a8f2e8df9673ddb099262355da4c9b99b1 The GPIOHANDLE_GET_LINE_VALUES_IOCTL handler allocates a gpiohandle_data struct on the stack and then passes it to copy_to_user(). But only the first element of the values array in the struct is set, which leaves the struct partially initialized. This exposes the previous, potentially sensitive, stack content to the issuing userspace application. To avoid this make sure that the struct is fully initialized. Cc: stable@vger.kernel.org Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The GPIOHANDLE_GET_LINE_VALUES_IOCTL handler allocates a gpiohandle_data
struct on the stack and then passes it to copy_to_user(). But only the
first element of the values array in the struct is set, which leaves the
struct partially initialized.

This exposes the previous, potentially sensitive, stack content to the
issuing userspace application. To avoid this make sure that the struct is
fully initialized.

Cc: stable@vger.kernel.org
Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: GPIO_GET_LINEHANDLE_IOCTL: Validate line offset 2016-10-21T12:39:18+00:00 Lars-Peter Clausen lars@metafoo.de 2016-10-18T14:54:01+00:00 e405f9fcb63602d35f7a419ededa3f952a395a72 The line offset that is used as an index into the descs array is provided by userspace and might go beyond the bounds of the array. If that happens undefined behavior will occur. Make sure that the offset is within the bounds of the desc array and reject any requests that specify a value outside of it. Cc: stable@vger.kernel.org Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The line offset that is used as an index into the descs array is provided
by userspace and might go beyond the bounds of the array. If that happens
undefined behavior will occur.

Make sure that the offset is within the bounds of the desc array and reject
any requests that specify a value outside of it.

Cc: stable@vger.kernel.org
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpio: GPIO_GET_CHIPINFO_IOCTL: Fix information leak 2016-10-21T12:38:02+00:00 Lars-Peter Clausen lars@metafoo.de 2016-10-18T14:54:00+00:00 0f4bbb233743bdfd51d47688b0bc2561f310488b The GPIO_GET_CHIPINFO_IOCTL handler allocates a gpiochip_info struct on the stack and then passes it to copy_to_user(). But depending on the length of the GPIO chip name and label the struct is only partially initialized. This exposes the previous, potentially sensitive, stack content to the issuing userspace application. To avoid this make sure that the struct is fully initialized. Cc: stable@vger.kernel.org Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The GPIO_GET_CHIPINFO_IOCTL handler allocates a gpiochip_info struct on the
stack and then passes it to copy_to_user(). But depending on the length of
the GPIO chip name and label the struct is only partially initialized.

This exposes the previous, potentially sensitive, stack content to the
issuing userspace application. To avoid this make sure that the struct is
fully initialized.

Cc: stable@vger.kernel.org
Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>