linux.git/drivers/gpio, branch v4.9-rc2

gpio: pca953x: add a comment explaining the need for a lockdep subclass

2016-10-11T21:17:08+00:00

This is a follow-up to commit 559b46990e76 ("gpio: pca953x: fix an
incorrect lockdep warning"). The reason for calling
lockdep_set_subclass() in pca953x_probe() is not explained in
the code.

Add a comment describing the problem, partial solution and required
future extensions.

Signed-off-by: Bartosz Golaszewski 
Acked-by: Linus Walleij 
Signed-off-by: Wolfram Sang

Merge branch 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2016-10-07T21:12:21+00:00

Pull i2c updates from Wolfram Sang:
 "Here is the 4.9 pull request from I2C including:

   - centralized error messages when registering to the core
   - improved lockdep annotations to prevent false positives
   - DT support for muxes, gates, and arbitrators
   - bus speeds can now be obtained from ACPI
   - i2c-octeon got refactored and now supports ThunderX SoCs, too
   - i2c-tegra and i2c-designware got a bigger bunch of updates
   - a couple of standard driver fixes and improvements"

* 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits)
  i2c: axxia: disable clks in case of failure in probe
  i2c: octeon: thunderx: Limit register access retries
  i2c: uniphier-f: fix misdetection of incomplete STOP condition
  gpio: pca953x: variable 'id' was used twice
  i2c: i801: Add support for Kaby Lake PCH-H
  gpio: pca953x: fix an incorrect lockdep warning
  i2c: add a warning to i2c_adapter_depth()
  lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible
  i2c: export i2c_adapter_depth()
  i2c: rk3x: Fix variable 'min_total_ns' unused warning
  i2c: rk3x: Fix sparse warning
  i2c / ACPI: Do not touch an I2C device if it belongs to another adapter
  i2c: octeon: Fix high-level controller status check
  i2c: octeon: Avoid sending STOP during recovery
  i2c: octeon: Fix set SCL recovery function
  i2c: rcar: add support for r8a7796 (R-Car M3-W)
  i2c: imx: make bus recovery through pinctrl optional
  i2c: meson: add gxbb compatible string
  i2c: uniphier-f: set the adapter to master mode when probing
  i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path
  ...

Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-10-05T18:49:09+00:00

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...

gpio: add missing static inline

2016-10-03T21:38:11+00:00

of_get_named_gpiod_flags() was missing a static inline version
when compiling without OF_GPIO. Add this.

Reported-by: kbuild test robot 
Signed-off-by: Linus Walleij

gpio: OF: localize some gpiochip init functions

2016-10-03T21:38:11+00:00

of_gpiochip_add() and of_gpiochip_remove() are only used locally
in the gpio subsystem so move these functions to the local
header.

Signed-off-by: Linus Walleij

gpio: acpi: separation of concerns

2016-10-03T21:38:10+00:00

The generic GPIO library directly implement code for acpi_find_gpio()
which is only used with CONFIG_ACPI. This was probably done because
OF did the same thing, but I removed that so remove this too.

Rename the internal acpi_find_gpio() in gpiolib-acpi.c to
acpi_populate_gpio_lookup() which seems to be more appropriate anyway
so as to avoid a namespace clash with the same function.

Make the stub return -ENOENT rather than -ENOSYS (as that is for
syscalls!).

For some reason the sunxi pin control driver was including the private
gpiolib header, it works just fine without it so remove that oneliner.

Cc: Rafael J. Wysocki 
Acked-by: Mika Westerberg 
Signed-off-by: Linus Walleij

gpio: OF: separation of concerns

2016-10-03T13:27:05+00:00

The generic GPIO library directly implement code for of_find_gpio()
which is only used with CONFIG_OF and causes compilation problems
on archs that do not even have stubs for OF functions, especially
on UM that does not implement any IO remap functions.

Move the function to gpiolib-of.c, implement a static inline stub
in gpiolib.h returning PTR_ERR(-ENOENT) if CONFIG_OF_GPIO is not
set and be done with it.

Signed-off-by: Linus Walleij

gpio: make memory-mapped drivers depend on HAS_IOMEM

2016-10-03T07:53:00+00:00

This one is pretty obvious: on UM Linux compilation of things
like allmodconfig and allyesconfig will fail due to the
absence of IO memory. Simply make these drivers depend on
HAS_IOMEM, it has been implicitly assumed all the time, so
just make it explicit.

The generic MMIO library also assumes that IOMEM is present
so make also this depend on HAS_IOMEM.

Reported-by: kbuild test robot 
Signed-off-by: Linus Walleij

gpio: stmpe: use BIT() macro

2016-09-30T16:03:02+00:00

Avoid custom (1 << bits) shifting by consequently using the
BIT() macro from .

Reviewed-by: Patrice Chotard 
Signed-off-by: Linus Walleij

gpio: stmpe: forbid unused lines to be mapped as IRQs

2016-09-30T16:02:50+00:00

Exploit the new mechanism for masking off disallowed IRQs
added by Mika Westerberg to properly manage the STMPE
"norequest mask" to disallow also mapping said lines as
IRQs.

Reviewed-by: Mika Westerberg 
Reviewed-by: Patrice Chotard 
Signed-off-by: Linus Walleij