Pull gpio updates from Bartosz Golaszewski:
 "The gpio-sim module is back, this time without any changes to
  configfs. This results in a less elegant user-space interface but I
  never got any follow-up on the committable items and didn't want to
  delay this module for several more months.

  Other than that we have support for several new models and some
  support going away. We started working on converting GPIO drivers to
  using fwnode exclusively in order to limit references to OF symbols to
  gpiolib-of.c exclusively. We also have regular tweaks and improvements
  all over the place.

  Summary:

   - new testing module: gpio-sim that is scheduled to replace
     gpio-mockup

   - initial changes aiming at converting all GPIO drivers to using the
     fwnode interface and limiting any references to OF symbols to
     gpiolib-of.c

   - add support for Tegra234 and Tegra241 to gpio-tegra186

   - add support for new models (SSD201 and SSD202D) to gpio-msc313

   - add basic support for interrupts to gpio-aggregator

   - add support for AMDIF031 HID device to gpio-amdpt

   - drop support for unused platforms in gpio-xlp

   - cleanup leftovers from the removal of the legacy Samsung Exynos
     GPIO driver

   - use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
     PREEMPT_RT happy

   - generalize the common 'ngpios' device property by reading it in the
     core gpiolib code so that we can remove duplicate reads from
     drivers

   - allow line names from device properties to override names set by
     drivers

   - code shrink in gpiod_add_lookup_table()

   - add new model to the DT bindings for gpio-vf610

   - convert DT bindings for tegra devices to YAML

   - improvements to interrupt handling in gpio-rcar and gpio-rockchip

   - updates to intel drivers from Andy (details in the merge commit)

   - some minor tweaks, improvements and coding-style fixes all around
     the subsystem"

* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
  gpio: rcar: Propagate errors from devm_request_irq()
  gpio: rcar: Use platform_get_irq() to get the interrupt
  gpio: ts5500: Use platform_get_irq() to get the interrupt
  gpio: dwapb: Switch to use fwnode instead of of_node
  gpiolib: acpi: make fwnode take precedence in struct gpio_chip
  dt-bindings: gpio: samsung: drop unused bindings
  gpio: max3191x: Use bitmap_free() to free bitmap
  gpio: regmap: Switch to use fwnode instead of of_node
  gpio: tegra186: Add support for Tegra241
  dt-bindings: gpio: Add Tegra241 support
  gpio: brcmstb: Use local variable to access OF node
  gpio: Remove unused local OF node pointers
  gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
  gpio: msc313: Add support for SSD201 and SSD202D
  gpio: msc313: Code clean ups
  dt-bindings: gpio: msc313: Add offsets for ssd20xd
  dt-bindings: gpio: msc313: Add compatible for ssd20xd
  gpio: sim: fix uninitialized ret variable
  gpio: Propagate firmware node from a parent device
  gpio: Setup parent device and get rid of unnecessary of_node assignment
  ...

Implement a new, modern GPIO testing module controlled by configfs
attributes instead of module parameters. The goal of this driver is
to provide a replacement for gpio-mockup that will be easily extensible
with new features and doesn't require reloading the module to change
the setup.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/4eff6bd5eff8afc137dd8c1697cb5c6b2e3aacd2.1637066805.git.matti.vaittinen@fi.rohmeurope.com

This patch adds driver support for the zynqmp modepin GPIO controller.
GPIO modepin driver set and get the value and status of the PS_MODE pin,
based on device-tree pin configuration. These four mode pins are
configurable as input/output. The mode pin has a control register, which
have lower four-bits [0:3] are configurable as input/output, next four-bits
can be used for reading the data  as input[4:7], and next setting the
output pin state output[8:11]. By default value of mode pin register is 0.

Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Commit e1324ece2af4 ("ARM: imx: Remove i.MX35 board files") removes the
config MACH_MX35_3DS in arch/arm/mach-imx/Kconfig.

Hence, since then, the MX35 3DS BOARD MC9S08DZ60 GPIO functions are dead
code as its config GPIO_MC9S08DZ60 depends on the config MACH_MX35_3DS.

Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:

MACH_MX35_3DS
Referencing files: drivers/gpio/Kconfig

Remove the obsolete MX35 3DS BOARD MC9S08DZ60 GPIO functions.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This patch adds a new driver for Virtio based GPIO devices.

This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.

Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This patch add support for rockchip gpio controller, which is supported
in pinctrl driver in the past.

With this patch, the pinctrl-rockchip driver will drop gpio related
codes and populate platform driver to gpio-rockchip.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210816012053.1119069-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

IDT 79RC3243x SoCs integrated a gpio controller, which handles up
to 32 gpios. All gpios could be used as an interrupt source.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Pull gpio updates from Bartosz Golaszewski:

 - new driver for the Realtek Otto GPIO controller

 - ACPI support for gpio-mpc8xxx

 - edge event support for gpio-sch (+ Kconfig fixes)

 - Kconfig improvements in gpio-ich

 - fixes to older issues in gpio-mockup

 - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055

 - improve the GPIO aggregator code by using more generic interfaces
   instead of reimplementing them in the driver

 - convert the DT bindings for gpio-74x164 to yaml

 - documentation improvements

 - a slew of other minor fixes and improvements to GPIO drivers

* tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits)
  dt-bindings: gpio: add YAML description for rockchip,gpio-bank
  gpio: mxs: remove useless function
  dt-bindings: gpio: fairchild,74hc595: Convert to json-schema
  gpio: it87: remove unused code
  gpio: 104-dio-48e: Fix coding style issues
  gpio: mpc8xxx: Add ACPI support
  gpio: ich: Switch to be dependent on LPC_ICH
  gpio: sch: Drop MFD_CORE selection
  gpio: sch: depends on LPC_SCH
  gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
  gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events
  gpio: sch: Add edge event support
  gpio: aggregator: Replace custom get_arg() with a generic next_arg()
  lib/cmdline: Export next_arg() for being used in modules
  gpio: omap: Use device_get_match_data() helper
  gpio: Add Realtek Otto GPIO support
  dt-bindings: gpio: Binding for Realtek Otto GPIO
  docs: kernel-parameters: Add gpio_mockup_named_lines
  docs: kernel-parameters: Move gpio-mockup for alphabetic order
  lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc()
  ...