Pull gpio updates from Bartosz Golaszewski:
 "We have two new drivers, some improvements to the core code, lots of
  different updates to existing GPIO drivers and some dt-bindings on
  top.

  There's nothing controversial in here and almost everything has been
  in next for more than a week (95% a lot longer than this). The only
  thing that has spent less time in next is a new driver so no risk of
  regressions.

  The single merge pulls in changes that remove all usage of global GPIO
  numbers from arch/arm/mach-omap.

  Core GPIO library:
   - remove unused symbols
   - don't spam the kernel log with messages about hogs
   - remove old sysfs API cruft
   - improve handling of GPIO masks

  New drivers:
   - add a driver for the BlueField-3 GPIO controller
   - add GPIO support for the TPS65219 PMIC

  Driver improvements:
   - extend the gpio-aggregator driver to support ramp-up/ramp-down
     delay
   - remove unnecessary CONFIG_OF guards from gpio-aggregator
   - readability improvements in gpio-tangier
   - switch i2c drivers back to using probe() now that it's been
     converted in the i2c subsystem to not taking the id parameter
   - remove unused inclusions of of_gpio.h in several drivers
   - make pm ops static in gpio-davinci and fix a comment
   - use more devres in drivers to shrink and simplify the code
   - add missing include in gpio-sa1100
   - add HAS_IOPORT KConfig dependency where needed
   - add permissions checks before accessing pins in gpio-tegra186
   - convert the gpio-zynq driver to using immutable irqchips
   - preserve output settings set by the bootloader in gpio-mpc8xxx

  Selftests:
   - tweak the variable naming in script tests

  Device tree updates:
   - convert gpio-mmio and gpio-stmpe to YAML
   - add parsing of GPIO hogs to gpio-vf610
   - add bindings for the Cirrus EP93xx GPIO controller
   - add gpio-line-names property to the gpio-pca9570 bindings
   - extend the binding for x-powers,axp209 with another block"

* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
  of: unittest: drop assertions for GPIO hog messages
  gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
  gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
  dt-bindings: gpio: gpio-vf610: Add parsing of hogs
  gpio: lpc18xx: Remove unused of_gpio.h inclusion
  gpio: xra1403: Remove unused of_gpio.h inclusion
  gpio: mpc8xxx: Remove unused of_gpio.h inclusion
  dt-bindings: gpio: Add Cirrus EP93xx
  gpio: mpc8xxx: latch GPIOs state on module load when configured as output
  selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
  gpio: mlxbf3: Add gpio driver support
  gpio: delay: Remove duplicative functionality
  gpio: aggregator: Set up a parser of delay line parameters
  gpio: aggregator: Support delay for setting up individual GPIOs
  gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
  dt-bindings: gpio: pca9570: add gpio-line-names property
  gpiolib: remove unused gpio_cansleep()
  gpio: tps65219: add GPIO support for TPS65219 PMIC
  gpio: zynq: fix zynqmp_gpio not an immutable chip warning
  gpio: davinci: make davinci_gpio_dev_pm_ops static
  ...

Add support for the BlueField-3 SoC GPIO driver.
This driver configures and handles GPIO interrupts. It also enables a user
to manipulate certain GPIO pins via libgpiod tools or other kernel drivers.
The usables pins are defined via the "gpio-reserved-ranges" property.

Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Now that GPIO aggregator supports a delay line, drop the duplicative
functionality, i.e. the entire gpio-delay driver.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add support for TPS65219 PMICs GPIO interface.

3 GPIO pins:
- GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage.
- GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec.

GPIO0 is statically configured as input or output prior to Linux boot.
it is used for MULTI_DEVICE_ENABLE function.
This setting is statically configured by NVM.
GPIO0 can't be used as a generic GPIO (specification Table 8-34).
It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.

Datasheet describes specific usage for non standard GPIO.

Datasheet: https://www.ti.com/lit/ds/symlink/tps65219.pdf
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This driver relies on OF_GPIO features, add a dependency to Kconfig.

Fixes: cf5dec80c4e2 ("gpio: Add gpio delay driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This driver implements a GPIO enable/disable delay. It supports a list
of GPIO outputs, which ramp-up/ramp-down delay can be specified at
consumer location.
The main purpose is to address external, passive delays upon line
voltage changes.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In fact the device with chip id 0xD283 is called NCT6126D, and that is
the chip id the Nuvoton code was written for. Correct that name to avoid
confusion, because a NCT6116D in fact exists as well but has another
chip id, and is currently not supported.

The look at the spec also revealed that GPIO group7 in fact has 8 pins,
so correct the pin count in that group as well.

Fixes: d0918a84aff0 ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116")
Reported-by: Xing Tong Wu <xingtong.wu@siemens.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for  Renesas RZ/G2L MTU3

  New Device Support:
   - Add support for Lenovo Yoga Book X90F to Intel CHT WC
   - Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
   - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
   - Add support for AXP15060 PMIC to X-Powers PMIC collection

  Remove Device Support:
   - Remove support for Samsung 5M8751 and S5M8763 PMIC devices

  New Functionality:
   - Convert deprecated QCOM IRQ Chip to config registers
   - Add support for 32-bit address spaces to Renesas SMUs

  Fix-ups:
   - Make use of APIs / MACROs designed to simplify and demystify
   - Add / improve Device Tree bindings
   - Memory saving struct layout optimisations
   - Remove old / deprecated functionality
   - Factor out unassigned register addresses from ranges
   - Trivial: Spelling fixes, renames and coding style fixes
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs

  Bug Fixes:
   - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
   - Remove MODULE_*() helpers from non-tristate drivers
   - Do not attempt to use out-of-range memory addresses associated with io_base
   - Provide missing export helpers
   - Fix remap bulk read optimisation fallout
   - Fix memory leak issues in error paths"

* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
  dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
  dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
  mfd: axp20x: Add support for AXP15060 PMIC
  dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
  counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
  dt-bindings: mfd: dlg,da9063: Document voltage monitoring
  dt-bindings: mfd: stm32: Remove unnecessary blank lines
  dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
  MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  counter: Add Renesas RZ/G2L MTU3a counter driver
  Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  mfd: Add Renesas RZ/G2L MTU3a core driver
  dt-bindings: timer: Document RZ/G2L MTU3a bindings
  mfd: rsmu_i2c: Convert to i2c's .probe_new() again
  mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
  mfd: dln2: Fix memory leak in dln2_probe()
  mfd: axp20x: Fix axp288 writable-ranges
  ...

This patch implements the GPIO function of Intel USB-I2C/GPIO/SPI adapter
device named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA
GPIO module with specific protocol through interfaces exported by LJCA USB
driver.

Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230225140118.2037220-3-xiang.ye@intel.com